Re: [Gnewsense-dev] lemote does not boot after install

[samy boutayeb]

Hola Quiliro,

Le samedi 23 janvier 2010 à 20:19 -0500, Quiliro Ordóñez a écrit :
> On the gNewSense installation, I followed the steps in
> http://wiki.gnewsense.org/Projects/GNewSenseToMIPS. Everything went
> fine untill the installation finished and the computer rebooted. It
> was all normal but instead of seeing a kernel in /boot I get another
> file:
> 
> PMON> devls
> Device name   Type
> rtl0                 IFNET
> wd0                DISK
> PMON> dir (wd0,0)/boot
> .                     <DIR>
> ..                    <DIR>
> delo.2nd          <FILE>       67757
> PMON> load (wd0,0)/boot/vmlinux-2.6.31.6-libre1
> (wd0,0)/boot/vmlinux-2.6.31.6-libre1: Undefined error: 0
> PMON> load (wd0,0)/boot/vmlinux
> (wd0,0)/boot/vmlinux: Undefined error: 0
> PMON> load (wd0,0)/boot/delo.2nd
> Loading file: (wd0,0)/boot/delo.2nd (elf)
> 0x80440000/50776 + 0x8044c658/6856(z) + 131 syms-
> Entry address is 0x80443840
> PMON>
> 
> And cannot boot. Obviously the kernel was not copied but the resto of
> the OS has been installed because when I type:
> dir (wd0,0)/
> I can see the whole directory tree and home has my username.
> 
> Should I reinstall?

First, it's advisable to create an rescue USB stick, as described in
"Creation of a recovery system for the Yeeloong
laptop" ( http://wiki.gnewsense?org/Projects/Lemote#toc19 ).

Then examine your system.

Then, eventually try to download & install one linux-image located in
http://www.fsfla.org/download/linux-libre/lemote/gnewsense/pool/

Muy atentamente

Samy