gmediaserver-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[gmediaserver-devel] Xbox 360 failure report


From: Jimmy Oliver
Subject: [gmediaserver-devel] Xbox 360 failure report
Date: Wed, 04 Jan 2006 21:56:26 -0500

Hi all,
I wanted to report to the list that my Xbox 360 does not work with
gmediaserver.  I have also tried ushare and had no luck.  The only thing
I have been able to get working is TwonkyMedia.  I am using Ubuntu
Breezy 5.10.  I would like to see a working gpl upnp media server with
Xbox 360 support.  If there is anyone who is willing to work with me, I
can provide packet captures and any other diagnostic data.  My C skills
are _VERY_ dubious at best, else I would just submit a patch!  Here are
some details about my setup.

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
192.168.101.0   0.0.0.0         255.255.255.0   U     0      0        0
eth0
239.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0
eth0
0.0.0.0         192.168.101.1   0.0.0.0         UG    0      0        0
eth0

$ gmediaserver --version
gmediaserver 0.9.0
Copyright (C) 2005 Oskar Liljeblad.
This is free software.  You may redistribute copies of it under the
terms of
the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
There is NO WARRANTY, to the extent permitted by law.

Written by Oskar Liljeblad.

Linux jimbyfs 2.6.12-10-it821x #1 Mon Jan 2 00:20:22 EST 2006 i686
GNU/Linux

// I tried all 3 profiles that were mentioned with --help.  All had the
same results

./gmediaserver --friendly-name=jimbyfs -i eth0  -v3 --profile=dms1
"/share/Users/joliver/Music/iTunes/iTunes Music"
gmediaserver process id 17812 starting
Using IP address 192.168.101.100.
Initializing UPnP subsystem...
UPnP MediaServer listening on 192.168.101.100:49152
Enabling UPnP web server...
Registering UPnP root device...
Sending UPnP advertisement for device (expire time 100 seconds)...
Listening for control point connections...


Regards,
-Jimmy 




reply via email to

[Prev in Thread] Current Thread [Next in Thread]