Re: GForth-EC isn't functional

[Bernd Paysan]

Am Dienstag, 28. Dezember 2021, 22:55:36 CET schrieb Joel Rees:
> I don't think 6502 or 8086 is going to work at all.
> 
> Others with a large enough address space need a working gforth to build in
> the normal build process, if I recall correctly..

You need to build the normal gforth first (and not in a separate build 
directory), and then run

./build-ec <target>

there.

6502 fails, but the other three (r8c, 8086 and MISC) build.  I didn't check if 
they build correctly (after replacing THIRD in kernel-ec/saccepft.fs with 2 
PICK).  Actually, it is probably better to use the gforth-0.7.3 to build 
Gforth-EC, as no development has been done for Gforth-EC, and we tried to 
separate the Gforth-EC kernel, but haven't tested if we did succeed other than 
“it compiles”.

-- 
Bernd Paysan
"If you want it done right, you have to do it yourself"
net2o id: kQusJzA;7*?t=uy@X}1GWr!+0qqp_Cn176t4(dQ*
https://net2o.de/

signature.asc
Description: This is a digitally signed message part.