Re: [Gcl-devel] Axiom on Slackware, anyone?

[JCA]

  I am attaching a file that contains the sequence of commands that I
used. sed complains, as you can see. I was using version 4.0.9, but
the same happened with version 4.1.4. Other than this, I am using a
(fairly) vanilla Slackware 10.0 distribution, although I remember
having seen similar problems with older releases. The box has an
Athlon XP processor, at two point something GHz.

  Let me know if you need more info.


On Wed, 09 Feb 2005 04:38:58 -0800 (PST), Camm Maguire
<address@hidden> wrote:
> Greetings!  Could we get more context to the build here?  I'd be happy
> to look into this when I get back in the saddle on 2/15.
> 
> Take care,
> 
> root <address@hidden> writes:
> 
> > Camm,
> >
> > Any insight into this?
> >
> > TIm
> >
> > From: JCA <address@hidden>
> > Subject: [Axiom-developer] Axiom on Slackware, anyone?
> > To: address@hidden
> > Date: Wed, 2 Feb 2005 07:44:17 -0800
> >
> >
> >    I have been trying to get Axiom built on Slackware 10 for a while
> > now, and the build process always breaks down, almost immediately,
> > when attempting to build GCL. Here are some relevant lines:
> >
> > make[3]: Entering directory `/mnt/axiom/lsp/gcl-2.6.5'
> > rm -f bin/gcl xbin/gcl
> > MGCLDIR=`echo /mnt/axiom/lsp/gcl-2.6.5 | sed -e 'sX^\([a-z]\):X/\1Xg'` ; \
> > GCLDIR=`echo /mnt/axiom/lsp/gcl-2.6.5` ; \
> > make install-command "INSTALL_LIB_DIR=$GCLDIR" "prefix=$GCLDIR"
> > "BINDIR=$MGCLDIR/unixport"
> > make[4]: Entering directory `/mnt/axiom/lsp/gcl-2.6.5'
> > rm -f /mnt/axiom/lsp/gcl-2.6.5/bin/gcl
> > (echo '#!/bin/sh' ; \
> > echo exec /mnt/axiom/lsp/gcl-2.6.5/unixport/ \\ ; \
> > echo '   -dir' /mnt/axiom/lsp/gcl-2.6.5/unixport/ \\ ; \
> > echo '   -libdir' /mnt/axiom/lsp/gcl-2.6.5/ \\ ; \
> > echo '   -eval '\''(setq si::*allow-gzipped-file* t)'\' \\ ;\
> > ! [ -d "" ] || echo '   -eval '\''(setq si::*tk-library* '\"\"')'\' \\;\
> > echo '     '\"address@hidden" ) > /mnt/axiom/lsp/gcl-2.6.5/bin/gcl;
> > echo '#' other options: -load "/tmp/foo.o" -load "jo.lsp" -eval '"(joe
> > 3)"' >> /mnt/axiom/lsp/gcl-2.6.5/bin/gcl
> > chmod a+x /mnt/axiom/lsp/gcl-2.6.5/bin/gcl
> > rm -f /mnt/axiom/lsp/gcl-2.6.5/bin/gclm.bat
> > if gcc --version | grep mingw >/dev/null 2>&1 ; then (echo '@SET cd='; \
> >  echo '@SET promp%prompt%'; \
> >  echo '@PROMPT SET cd'; \
> >  echo '@CALL>%temp%.\setdir.bat'; \
> >  echo '@'; \
> >  echo '% do not delete this line %'; \
> >  echo '@ECHO off'; \
> >  echo 'PROMPT %promp'; \
> >  echo 'FOR %%c IN (CALL DEL) DO %%c %temp%.\setdir.bat'; \
> >  echo 'set cwd=%cd%'; \
> >  echo 'set libdir=%cd%\..\lib\gcl-`cat majvers`.`cat minvers`'; \
> >  echo 'set unixportdir=%libdir%\unixport'; \
> >  echo 'path %cd%\..\mingw\bin;%PATH%'; \
> >  echo "start %unixportdir%\.exe -dir %unixportdir% -libdir %libdir%
> > - -eval \"(setq si::*allow-gzipped-file* t)\" %1 %2 %3 %4 %5 %6 %7 %8
> > %9" ) > /mnt/axiom/lsp/gcl-2.6.5/bin/gclm.bat ; fi
> > rm -f /mnt/axiom/lsp/gcl-2.6.5/bin/gclfinal.bat
> > if gcc --version | grep -i mingw >/dev/null 2>&1 ; then (echo 'ECHO
> > path %1\mingw\bin;%PATH% > gcli.bat'; \
> >  echo "ECHO start %1\lib\gcl-`cat majvers`.`cat minvers`\unixport\.exe
> > - -dir %1\lib\gcl-`cat majvers`.`cat minvers`\unixport -libdir
> > %1\lib\gcl-`cat majvers`.`cat minvers` -eval \"(setq
> > si::*allow-gzipped-file* t)\" %1 %2 %3 %4 %5 %6 %7 %8 %9 >> gcli.bat"
> > ) > /mnt/axiom/lsp/gcl-2.6.5/bin/gclfinal.bat ; fi
> > make[4]: Leaving directory `/mnt/axiom/lsp/gcl-2.6.5'
> > (cd xbin ; cp ../bin/gcl .)
> > cd cmpnew && make gcl_collectfn.o
> > make[4]: Entering directory `/mnt/axiom/lsp/gcl-2.6.5/cmpnew'
> > ../unixport/saved_pre_gcl ../unixport/ -compile gcl_collectfn.lsp
> > make[4]: ../unixport/saved_pre_gcl: Command not found
> > make[4]: *** [gcl_collectfn.o] Error 127
> > make[4]: Leaving directory `/mnt/axiom/lsp/gcl-2.6.5/cmpnew'
> > make[3]: *** [cmpnew/gcl_collectfn.o] Error 2
> > make[3]: Leaving directory `/mnt/axiom/lsp/gcl-2.6.5'
> > /bin/sh: line 1: unixport/saved_gcl: No such file or directory
> > make[2]: *** [gcldir] Error 127
> > make[2]: Leaving directory `/mnt/axiom/lsp'
> > make[1]: *** [lspdir] Error 2
> > make[1]: Leaving directory `/mnt/axiom'
> > make: *** [all] Error 2
> >
> >    Not being very Lisp-savvy yet, I find myself stymied at this point.
> >
> >    Anybody know how to fix this issue in Slackware?
> >
> >
> > _______________________________________________
> > Axiom-developer mailing list
> > address@hidden
> > http://lists.nongnu.org/mailman/listinfo/axiom-developer
> > ----------
> >
> >
> >
> > _______________________________________________
> > Gcl-devel mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/gcl-devel
> >
> >
> >
> 
> --
> Camm Maguire                                            address@hidden
> ==========================================================================
> "The earth is but one country, and mankind its citizens."  --  Baha'u'llah
>

Log
Description: Binary data