----------------------( start configure error output
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
mv: Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: mpbsd/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: mpf/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: mpn/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: mpq/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: mpz/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: printf/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: scanf/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: cxx/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/devel/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/mpbsd/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/mpf/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/mpn/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/mpq/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/mpz/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/rand/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/misc/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tests/cxx/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: tune/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: demos/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: demos/calc/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: demos/expr/Makefile: set owner/group (was: 1031/0): Operation not permitted
mv: gmp.h: set owner/group (was: 1031/0): Operation not permitted
mv: mp.h: set owner/group (was: 1031/0): Operation not permitted
mv: demos/expr/expr-impl.h: set owner/group (was: 1031/0): Operation not permitted
mv: config.h: set owner/group (was: 1031/0): Operation not permitted
In FreeBSD, tclsh is named with a version number.  This is because
different versions of tclsh are not compatible with each other and
they can not all be called "tclsh"!  You may need multiple versions
installed because a given port may depend on a specific version.

On your system, tclsh is installed under at least the following names:

tclsh8.4
----------------------( end configure error output