Re: [Gcl-devel] Build output

[C Y]

Here we go:

This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.

configure:728: checking host system type
configure:1076: checking for gcc
configure:1189: checking whether the C compiler (gcc  ) works
configure:1205: gcc -o conftest    conftest.c  1>&5
configure:1231: checking whether the C compiler (gcc  ) is a
cross-compiler
configure:1236: checking whether we are using GNU C
configure:1245: gcc -E conftest.c
configure:1264: checking whether gcc accepts -g
configure:1296: checking how to run the C preprocessor
configure:1317: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:1410: checking for gawk
configure:1479: checking system version (for dynamic loading)
configure:1487: checking for makeinfo
configure:1552: checking use_gmp=yes, doing configure in gmp directory
configure:1677: checking for size of gmp limbs
configure:1693: gcc -o conftest -g -O2   conftest.c  1>&5
configure:1716: checking _SHORT_LIMB
configure:1733: gcc -o conftest -g -O2   conftest.c  1>&5
configure: failed program was:
#line 1721 "configure"
#include "confdefs.h"
#include <stdio.h>
        #include "h/gmp.h"
        int main() {
        #ifdef _SHORT_LIMB
        return 0;
        #else
        return 1;
        #endif
        }
configure:1749: checking _LONG_LONG_LIMB
configure:1766: gcc -o conftest -g -O2   conftest.c  1>&5
configure: failed program was:
#line 1754 "configure"
#include "confdefs.h"
#include <stdio.h>
        #include "h/gmp.h"
        int main() {
        #ifdef _LONG_LONG_LIMB
        return 0;
        #else
        return 1;
        #endif
        }
configure:1805: checking for X
configure:2119: checking for dnet_ntoa in -ldnet
configure:2138: gcc -o conftest -g -O2   conftest.c -ldnet   1>&5
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -ldnet
collect2: ld returned 1 exit status
configure: failed program was:
#line 2127 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
configure:2160: checking for dnet_ntoa in -ldnet_stub
configure:2179: gcc -o conftest -g -O2   conftest.c -ldnet_stub   1>&5
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -ldnet_stub
collect2: ld returned 1 exit status
configure: failed program was:
#line 2168 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char dnet_ntoa();

int main() {
dnet_ntoa()
; return 0; }
configure:2208: checking for gethostbyname
configure:2236: gcc -o conftest -g -O2   conftest.c  1>&5
configure:2306: checking for connect
configure:2334: gcc -o conftest -g -O2   conftest.c  1>&5
configure:2398: checking for remove
configure:2426: gcc -o conftest -g -O2   conftest.c  1>&5
configure:2490: checking for shmat
configure:2518: gcc -o conftest -g -O2   conftest.c  1>&5
configure:2591: checking for IceConnectionNumber in -lICE
configure:2610: gcc -o conftest -g -O2   -L/usr/X11R6/lib conftest.c
-lICE   1>&5
configure:2641: checking for main in -lXmu
configure:2656: gcc -o conftest -g -O2   conftest.c -lXmu 
-L/usr/X11R6/lib  1>&5
configure:2678: checking for main in -lXt
configure:2693: gcc -o conftest -g -O2   conftest.c -lXt 
-L/usr/X11R6/lib -lXmu  1>&5
configure:2715: checking for main in -lXext
configure:2730: gcc -o conftest -g -O2   conftest.c -lXext 
-L/usr/X11R6/lib -lXmu -lXt  1>&5
configure:2752: checking for main in -lXaw
configure:2767: gcc -o conftest -g -O2   conftest.c -lXaw 
-L/usr/X11R6/lib -lXmu -lXt -lXext  1>&5
configure:2789: checking for main in -lX11
configure:2804: gcc -o conftest -g -O2   conftest.c -lX11 
-L/usr/X11R6/lib -lXmu -lXt -lXext -lXaw  1>&5
configure:2898: checking for bfd.h
configure:2908: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:2925: checking for bfd_init in -lbfd
configure:2944: gcc -o conftest -g -O2   conftest.c -lbfd -liberty 
1>&5
configure:2963: checking if need to define CONST for bfd
configure:2974: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3032: checking for useable bfd_boolean
configure:3044: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3131: checking size of long *
configure:3150: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3174: checking for endian.h
configure:3184: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3205: checking endianness
configure:3216: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3239: checking finding DBEGIN
configure:3261: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3283: checking finding CSTACK_ADDRESS
configure:3300: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3322: checking sizeof long long int
configure:3338: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3393: checking for pagewidth
configure:3408: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3435: checking for getcwd
configure:3463: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3490: checking for getwd
configure:3518: gcc -o conftest -g -O2   conftest.c  1>&5
/tmp/ccAnLsVC.o(.text+0xa): In function `main':
/home/user/gcl/configure:3512: the `getwd' function is dangerous and
should not be used.
configure:3543: checking for uname
configure:3571: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3595: checking for gettimeofday
configure:3623: gcc -o conftest -g -O2   conftest.c  1>&5
configure:3652: checking for sys/ioctl.h
configure:3662: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:3702: checking for BSDgettimeofday
configure:3730: gcc -o conftest -g -O2   conftest.c  1>&5
/tmp/ccMwOpAm.o(.text+0xa): In function `main':
/home/user/gcl/configure:3724: undefined reference to `BSDgettimeofday'
collect2: ld returned 1 exit status
configure: failed program was:
#line 3707 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char BSDgettimeofday(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char BSDgettimeofday();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub_BSDgettimeofday) || defined
(__stub___BSDgettimeofday)
choke me
#else
BSDgettimeofday();
#endif

; return 0; }
configure:3751: checking for gettimeofday
configure:3806: checking for gettimeofday declaration
configure:3830: checking for sin in -lm
configure:3849: gcc -o conftest -g -O2   conftest.c -lm   1>&5
configure:3842: warning: conflicting types for built-in function `sin'
configure:3871: checking for main in -lmingwex
configure:3886: gcc -o conftest -g -O2   conftest.c -lmingwex   -lm
1>&5
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -lmingwex
collect2: ld returned 1 exit status
configure: failed program was:
#line 3879 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
configure:3964: checking for math.h
configure:3974: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4011: checking for values.h
configure:4021: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4058: checking for float.h
configure:4068: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:4104: checking for isnormal
configure:4118: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure:4164: checking for isfinite
configure:4178: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure:4244: checking for sockets
configure:4247: checking for connect
configure:4390: checking for gethostbyname
configure:4476: checking for main in -lreadline
configure:4491: gcc -o conftest -g -O2   conftest.c -lreadline
-lncurses  -lm 1>&5
configure:4523: checking For network code for nsocket.c
configure:4552: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure:4569: checking check for listen using fcntl
configure:4584: gcc -c -g -O2  conftest.c 1>&5
configure:4603: checking for profil
configure:4631: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure:4656: checking for setenv
configure:4684: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure:4764: checking for _cleanup
configure:4792: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
/tmp/ccGahQvq.o(.text+0xa): In function `main':
/home/user/gcl/configure:4786: undefined reference to `_cleanup'
collect2: ld returned 1 exit status
configure: failed program was:
#line 4769 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
    which can conflict with char _cleanup(); below.  */
#include <assert.h>
/* Override any gcc2 internal prototype to avoid an error.  */
/* We use char because int might match the return type of a gcc2
    builtin and then its argument prototype would still apply.  */
char _cleanup();

int main() {

/* The GNU C library defines this for functions which it implements
    to always fail with ENOSYS.  Some functions are actually named
    something starting with __ and the normal name is an alias.  */
#if defined (__stub__cleanup) || defined (__stub____cleanup)
choke me
#else
_cleanup();
#endif

; return 0; }
configure:4846: checking FIONBIO vs. O_NONBLOCK for nonblocking I/O
configure:4877: checking check for SV_ONSTACK
configure:4888: gcc -c -g -O2  conftest.c 1>&5
configure:4905: checking check for SIGSYS
configure:4916: gcc -c -g -O2  conftest.c 1>&5
configure:4934: checking check for SIGEMT
configure:4945: gcc -c -g -O2  conftest.c 1>&5
configure:4938: `SIGEMT' undeclared here (not in a function)
configure: failed program was:
#line 4936 "configure"
#include "confdefs.h"
#include <signal.h>
int joe=SIGEMT;

int main() {

; return 0; }
configure:4969: checking for asm/sigcontext.h
configure:4979: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:5009: checking for asm/signal.h
configure:5019: gcc -E  conftest.c >/dev/null 2>conftest.out
configure:5057: gcc -c -g -O2  conftest.c 1>&5
configure:5138: checking for emacs
configure:5186: checking emacs site lisp directory
configure:5208: checking emacs default.el
configure:5237: checking emacs info/dir
configure:5251: checking for tcl/tk
configure:5274: checking for tclsh
configure:5374: checking for main in -llieee
configure:5389: gcc -o conftest -g -O2   conftest.c -llieee   -lm 1>&5
/usr/lib/gcc-lib/i686-pc-linux-gnu/3.2.2/../../../../i686-pc-linux-gnu/bin/ld:
cannot find -llieee
collect2: ld returned 1 exit status
configure: failed program was:
#line 5382 "configure"
#include "confdefs.h"

int main() {
main()
; return 0; }
configure:5454: checking alloca
configure:5463: gcc -o conftest -g -O2   conftest.c  -lm 1>&5
configure: In function `main':
configure:5460: `NULL' undeclared (first use in this function)
configure:5460: (Each undeclared identifier is reported only once
configure:5460: for each function it appears in.)
configure: failed program was:
#line 5459 "configure"
#include "confdefs.h"
int main() { exit(alloca(500) != NULL ? 0 : 1);}
configure:5552: checking Checking for buggy gcc version from redhat


--- Camm Maguire <address@hidden> wrote:
> Greetings, and thanks!  OK its still not obvious.  Could you please
> post the config.log generated by this run?
> 
> take care,
> 
> C Y <address@hidden> writes:
> 
> > Let's try that again.
> > 
> > Hmmm.  OK, here's everything, from the first configure through
> make,
> > and then just for good measure I do a make clean and make again,
> which
> > seems to produce a different error. What are conftest files, by the
> > way?  I can't seem to find them. Here are all the versions of
> > everything relevant I can find:
> > 
> > glibc        2.3.1
> > gcc          3.2.2
> > readline     4.3
> > m4           1.4
> > tk           8.3.4
> > tex          2.0.2
> > texinfo      4.3
> > binutils     2.13.90.0.18
> > texi2html    1.64
> > autoconf     2.57
> > automake     1.7.2
> > gettext      0.11.5
> > sed          4.0.6 
> > 
> > Build outputs:
> > 
> > bash-2.05b$ ./configure
> > creating cache ./config.cache
> > checking host system type... i686-pc-linux-gnu
> > host=i686-pc-linux-gnu
> > enable_machine=
> > use=386-linux
> > checking for gcc... gcc
> > checking whether the C compiler (gcc  ) works... yes
> > checking whether the C compiler (gcc  ) is a cross-compiler... no
> > checking whether we are using GNU C... yes
> > checking whether gcc accepts -g... yes
> > checking how to run the C preprocessor... gcc -E
> > checking for gawk... gawk
> > checking system version (for dynamic loading)... checking for
> > makeinfo... makeinfo
> > Linux-2.4.19-gentoo-r10
> > checking use_gmp=yes, doing configure in gmp directory... 
> > #
> > #
> > # -------------------
> > # Subconfigure of GMP
> > #
> > #
> > configure: WARNING: If you wanted to set the --build type, don't
> use
> > --host.
> >     If a cross compiler is detected then cross compile mode will be
> > used.
> > checking build system type... athlon-pc-linux-gnu
> > checking host system type... i686-pc-linux-gnu
> > checking for a BSD compatible install... /bin/install -c
> > checking whether build environment is sane... yes
> > checking for mawk... no
> > checking for gawk... gawk
> > checking whether make sets ${MAKE}... yes
> > checking whether to enable maintainer-specific portions of
> Makefiles...
> > no
> > checking compiler gcc -g -O2 -fomit-frame-pointer ... yes
> > checking compiler gcc -g -O2 -fomit-frame-pointer 
> -mcpu=pentiumpro...
> > yes
> > checking whether gcc -march=pentiumpro is good... configure:
> WARNING:
> > unrecognised gcc version string: gcc (GCC) 3.2.2
> > Copyright (C) 2002 Free Software Foundation, Inc.
> > This is free software; see the source for copying conditions. 
> There is
> > NO
> > warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
> > PURPOSE.
> > no
> > checking compiler gcc -g -O2 -fomit-frame-pointer -mcpu=pentiumpro 
> > -march=i486... yes
> > checking for i686-pc-linux-gnu-gcc... gcc
> > checking for C compiler default output... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for executable suffix... 
> > checking for object suffix... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether gcc accepts -g... yes
> > checking for style of include used by make... GNU
> > checking dependency style of gcc... none
> > checking for gcc option to accept ANSI C... none needed
> > checking how to run the C preprocessor... gcc -E
> > using ABI="standard"
> >       CC="gcc"
> >       CFLAGS="-g -O2 -fomit-frame-pointer -mcpu=pentiumpro
> -march=i486"
> >       CPPFLAGS=""
> > checking for gcc option to accept ANSI C... none needed
> > checking for function prototypes... yes
> > checking for ANSI C header files... yes
> > checking for string.h... yes
> > checking for i686-pc-linux-gnu-ar... no
> > checking for ar... ar
> > checking for BSD-compatible nm... nm
> > checking for ld used by GCC... /usr/i686-pc-linux-gnu/bin/ld
> > checking if the linker (/usr/i686-pc-linux-gnu/bin/ld) is GNU ld...
> yes
> > checking for /usr/i686-pc-linux-gnu/bin/ld option to reload object
> > files... -r
> > checking whether ln -s works... yes
> > checking how to recognise dependant libraries... pass_all
> > checking for dlfcn.h... yes
> > checking the maximum length of command line arguments... 49153
> > checking command to parse nm output from gcc object... ok
> > checking for objdir... .libs
> > checking for i686-pc-linux-gnu-ranlib... no
> > checking for ranlib... ranlib
> > checking for i686-pc-linux-gnu-strip... no
> > checking for strip... strip
> > checking if gcc static flag  works... yes
> > checking if gcc supports -fno-rtti -fno-exceptions... yes
> > checking for gcc option to produce PIC... -fPIC
> > checking if gcc PIC flag -fPIC works... yes
> > checking if gcc supports -c -o file.o... yes
> > checking whether the gcc linker (/usr/i686-pc-linux-gnu/bin/ld)
> > supports shared libraries... yes
> > checking whether -lc should be explicitly linked in... no
> > checking how to hardcode library paths into programs... immediate
> > checking whether stripping libraries is possible... yes
> > checking dynamic linker characteristics... GNU/Linux ld.so
> > checking if libtool supports shared libraries... yes
> > checking whether to build shared libraries... yes
> > checking whether to build static libraries... yes
> > configure: creating libtool
> > checking for ANSI C header files... (cached) yes
> > checking whether time.h and sys/time.h may both be included... yes
> > checking for locale.h... yes
> > checking for sys/mman.h... yes
> > checking for sys/param.h... yes
> > checking for sys/processor.h... no
> > checking for sys/resource.h... yes
> > checking for sys/sysctl.h... yes
> > checking for sys/systemcfg.h... no
> > checking for sys/time.h... yes
> > checking for sys/times.h... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... (cached) yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking whether fgetc is declared... yes
> > checking whether fscanf is declared... yes
> > checking whether optarg is declared... yes
> > checking whether ungetc is declared... yes
> > checking whether vfprintf is declared... yes
> > checking return type of signal handlers... void
> > checking for intmax_t... yes
> > checking for long double... yes
> > checking for long long... yes
> > checking for ptrdiff_t... yes
> > checking for quad_t... yes
> > checking for preprocessor stringizing operator... yes
> > checking whether <stdarg.h> exists and works... yes
> > checking whether gcc __attribute__ ((const)) works... yes
> > checking whether gcc __attribute__ ((malloc)) works... yes
> > checking whether gcc __attribute__ ((mode (XX))) works... yes
> > checking whether gcc __attribute__ ((noreturn)) works... yes
> > checking for inline... inline
> > checking for main in -lm... yes
> > checking for working alloca.h... yes
> > checking for alloca (via gmp-impl.h)... yes
> > checking how to allocate temporary memory... alloca
> > checking for alarm... yes
> > checking for getpagesize... yes
> > checking for getrusage... yes
> > checking for gettimeofday... yes
> > checking for localeconv... yes
> > checking for memset... yes
> > checking for mmap... yes
> > checking for mprotect... yes
> > checking for obstack_vprintf... yes
> > checking for popen... yes
> > checking for processor_info... no
> > checking for read_real_time... no
> > checking for strchr... yes
> > checking for strnlen... yes
> > checking for strtoul... yes
> > checking for sysconf... yes
> > checking for sysctl... yes
> > checking for sysctlbyname... no
> 
=== message truncated ===


__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com