Re: [Gcl-devel] configure and make failed on FreeBSD

[GOTO Kentaro]

Hi,

At 25 Oct 2002 11:27:29 -0400,
Camm Maguire wrote:
> Greetings!  OK, you have a few problems.  GCL has had quite a bit of
> work since 1.1, the version indicated in the FreeBSD.h file.  In
> general, I would suggest starting with 386-linux.(h,defs}, which will
> probably work right off the bat, and then only if necessary taking
> what youp might need from the older FreeBSD.{h,defs} files.

I see.  I would try --enable-wish=386-linux at first. 

> Second, is this a CVS snapshot, or 2.4.3?  You should not attempt an
> older version.  I don't recognize the order of your configure output,
> though it could be that of 2.4.3.  CVS looks quite different.

I'm very sorry that I was using pretty old snapshot cvs-checkout'ed
from utexas :<

Now, I did cvs co'ed from address@hidden, read previous
log again with your suggestion, patched the configure script a bit,
but the configure looked to fail with messages quite different from
what I post previously.

I would attach a complete log below.  If these attachments are too
large to post here, I would put them on my web site in next time.  


Thanks, 


Gotoken

% rm -fr gcl
% cvs -z3 -d:pserver:address@hidden:/cvsroot/gcl co gcl
[...]
% cd gcl
% mv configure configure~
% cp -p ~/tmp/configure .
% cvs diff configure > configure.diff
% ./configure --enable-wish=wish8.0jp \
              --enable-tclsh=tclsh8.0jp \
              --enable-machine=386-linux >& configure.log-386-linux
% gmake
cat h/config.h | sed -e "1,/Begin for cmpincl/d" \
        -e "/End for cmpinclude/,50000d" > tmpx
cat h/cmpincl1.h h/gclincl.h h/compbas.h h/enum.h h/mgmp.h h/object.h h/vs.h 
h/bds.h h/frame.h h/lex.h h/eval.h    h/funlink.h h/att_ext.h h/new_decl.h 
h/compbas2.h h/compat.h h/cmponly.h o/regexp.h h//protoize.h >> tmpx
./xbin/move-if-changed mv tmpx h/cmpinclude.h
tmpx and h/cmpinclude.h were not the same.
ln tmpx h/cmpinclude.h
./xbin/move-if-changed cp h/cmpinclude.h o/cmpinclude.h
h/cmpinclude.h and o/cmpinclude.h were not the same.
ln h/cmpinclude.h o/cmpinclude.h
(cd bin; make all)
"makefile", line 5: Need an operator
make: fatal errors encountered -- cannot continue
gmake: *** [unixport/saved_gcl] Error 1
% 

% cat configure.diff
Index: configure
===================================================================
RCS file: /cvsroot/gcl/gcl/configure,v
retrieving revision 1.83
diff -u -r1.83 configure
--- configure   9 Oct 2002 03:46:33 -0000       1.83
+++ configure   25 Oct 2002 17:47:57 -0000
@@ -627,6 +627,26 @@
   enable_notify="yes"
 fi
 
+ 
+# Check whether --enable-tclsh or --disable-tclsh was given.
+if test "${enable_tclsh+set}" = set; then
+  enableval="$enable_tclsh"
+  TCLSH=$enableval
+else
+  TCLSH="unknown"
+end
+fi
+ 
+
+# Check whether --enable-wish or --disable-wish was given.
+if test "${enable_wish+set}" = set; then   
+  enableval="$enable_wish"
+  TKSH=$enableval
+else
+  TKSH="unknown"
+end
+fi
+
 
 # Check whether --enable-tkconfig or --disable-tkconfig was given.
 if test "${enable_tkconfig+set}" = set; then

% cat configure.log-386-linux
creating cache ./config.cache
checking host system type... i386-unknown-freebsd4.5
host=i386-unknown-freebsd4.5
enable_machine=386-linux
use=386-linux
checking for gcc... gcc
checking whether the C compiler (gcc  ) works... yes
checking whether the C compiler (gcc  ) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether gcc accepts -g... yes
checking how to run the C preprocessor... gcc -E
checking system version (for dynamic loading)... checking for gawk... no
checking for nawk... no
checking for awk... awk
checking for makeinfo... makeinfo
FreeBSD-4.5-RELEASE
checking use_gmp=yes, doing configure in gmp directory... 
#
#
# -------------------
# Subconfigure of GMP
#
#
checking build system type... pentium3-unknown-freebsd4.5
checking host system type... pentium3-unknown-freebsd4.5
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for mawk... no
checking for gawk... no
checking for nawk... no
checking for awk... awk
checking whether make sets ${MAKE}... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking compiler gcc -g -O2 -fomit-frame-pointer ... yes
checking compiler gcc -g -O2 -fomit-frame-pointer  -mcpu=pentiumpro... yes
checking whether gcc -march=pentiumpro is good... no
checking compiler gcc -g -O2 -fomit-frame-pointer -mcpu=pentiumpro  
-march=i486... yes
checking for gcc... gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for style of include used by make... GNU
checking dependency style of gcc... none
checking for gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... gcc -E
using ABI="standard"
      CC="gcc"
      CFLAGS="-g -O2 -fomit-frame-pointer -mcpu=pentiumpro -march=i486"
      CPPFLAGS=""
checking for gcc option to accept ANSI C... none needed
checking for function prototypes... yes
checking for ANSI C header files... yes
checking for string.h... yes
checking for ar... ar
checking for BSD-compatible nm... /usr/bin/nm -B
checking for ld used by GCC... /usr/libexec/elf/ld
checking if the linker (/usr/libexec/elf/ld) is GNU ld... yes
checking for /usr/libexec/elf/ld option to reload object files... -r
checking whether ln -s works... yes
checking how to recognise dependant libraries... pass_all
checking for dlfcn.h... yes
checking the maximum length of command line arguments... 24577
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag  works... yes
checking if gcc supports -fno-rtti -fno-exceptions... yes
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/libexec/elf/ld) supports shared 
libraries... yes
checking whether -lc should be explicitly linked in... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking dynamic linker characteristics... freebsd4.5 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
checking if the assembler knows about MMX instructions... yes
checking for ANSI C header files... (cached) yes
checking whether time.h and sys/time.h may both be included... yes
checking for locale.h... yes
checking for sys/mman.h... yes
checking for sys/param.h... yes
checking for sys/processor.h... no
checking for sys/resource.h... yes
checking for sys/sysctl.h... yes
checking for sys/systemcfg.h... no
checking for sys/time.h... yes
checking for sys/times.h... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... (cached) yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... yes
checking whether fgetc is declared... yes
checking whether fscanf is declared... yes
checking whether optarg is declared... yes
checking whether ungetc is declared... yes
checking whether vfprintf is declared... yes
checking return type of signal handlers... void
checking for intmax_t... no
checking for long double... yes
checking for long long... yes
checking for ptrdiff_t... yes
checking for quad_t... yes
checking for preprocessor stringizing operator... yes
checking whether <stdarg.h> exists and works... yes
checking whether gcc __attribute__ ((const)) works... yes
checking whether gcc __attribute__ ((malloc)) works... no
checking whether gcc __attribute__ ((mode (XX))) works... yes
checking whether gcc __attribute__ ((noreturn)) works... yes
checking for inline... inline
checking for main in -lm... yes
checking for working alloca.h... no
checking for alloca (via gmp-impl.h)... yes
checking how to allocate temporary memory... alloca
checking for alarm... yes
checking for getpagesize... yes
checking for getrusage... yes
checking for gettimeofday... yes
checking for localeconv... yes
checking for memset... yes
checking for mmap... yes
checking for mprotect... yes
checking for obstack_vprintf... no
checking for popen... yes
checking for processor_info... no
checking for read_real_time... no
checking for strchr... yes
checking for strnlen... no
checking for strtoul... yes
checking for sysconf... yes
checking for sysctl... yes
checking for sysctlbyname... yes
checking for times... yes
checking for vsnprintf... yes
checking whether vsnprintf works... yes
checking whether sscanf needs writable input... no
checking for suitable m4... m4
checking if m4wrap produces spurious output... no
checking how to switch to text section... .text
checking how to switch to data section... .data
checking what assembly label suffix to use... :
checking how to export a symbol... .globl
checking if globals are prefixed by underscore... no
checking how to switch to read-only data section...     .section        .rodata
checking if the export directive needs an attribute... 
checking for assembler .type directive... .type $1,@$2
checking for assembler .size directive... .size $1,$2
checking what prefix to use for a local label... .L
checking how to define a 32-bit word... .long
checking if .align assembly directive is logarithmic... no
checking if the .align directive accepts an 0x90 fill in .text... yes
checking if the assembler takes cl with shldl... yes
creating config.m4
configure: creating ./config.status
config.status: creating Makefile
config.status: creating mpbsd/Makefile
config.status: creating mpf/Makefile
config.status: creating mpn/Makefile
config.status: creating mpq/Makefile
config.status: creating mpz/Makefile
config.status: creating printf/Makefile
config.status: creating scanf/Makefile
config.status: creating cxx/Makefile
config.status: creating tests/Makefile
config.status: creating tests/devel/Makefile
config.status: creating tests/mpbsd/Makefile
config.status: creating tests/mpf/Makefile
config.status: creating tests/mpn/Makefile
config.status: creating tests/mpq/Makefile
config.status: creating tests/mpz/Makefile
config.status: creating tests/rand/Makefile
config.status: creating tests/misc/Makefile
config.status: creating tests/cxx/Makefile
config.status: creating tune/Makefile
config.status: creating demos/Makefile
config.status: creating demos/calc/Makefile
config.status: creating demos/expr/Makefile
config.status: creating gmp.h
config.status: creating mp.h
config.status: creating demos/expr/expr-impl.h
config.status: creating config.h
config.status: linking ./mpn/x86/udiv.asm to mpn/udiv.asm
config.status: linking ./mpn/x86/umul.asm to mpn/umul.asm
config.status: linking ./mpn/generic/add.c to mpn/add.c
config.status: linking ./mpn/generic/add_1.c to mpn/add_1.c
config.status: linking ./mpn/x86/aors_n.asm to mpn/add_n.asm
config.status: linking ./mpn/generic/sub.c to mpn/sub.c
config.status: linking ./mpn/generic/sub_1.c to mpn/sub_1.c
config.status: linking ./mpn/x86/aors_n.asm to mpn/sub_n.asm
config.status: linking ./mpn/x86/mul_1.asm to mpn/mul_1.asm
config.status: linking ./mpn/x86/p6/aorsmul_1.asm to mpn/addmul_1.asm
config.status: linking ./mpn/x86/p6/aorsmul_1.asm to mpn/submul_1.asm
config.status: linking ./mpn/x86/p6/mmx/lshift.asm to mpn/lshift.asm
config.status: linking ./mpn/x86/p6/mmx/rshift.asm to mpn/rshift.asm
config.status: linking ./mpn/x86/p6/dive_1.asm to mpn/dive_1.asm
config.status: linking ./mpn/x86/p6/diveby3.asm to mpn/diveby3.asm
config.status: linking ./mpn/generic/divis.c to mpn/divis.c
config.status: linking ./mpn/generic/divrem.c to mpn/divrem.c
config.status: linking ./mpn/x86/p6/mmx/divrem_1.asm to mpn/divrem_1.asm
config.status: linking ./mpn/generic/divrem_2.c to mpn/divrem_2.c
config.status: linking ./mpn/generic/fib2_ui.c to mpn/fib2_ui.c
config.status: linking ./mpn/x86/p6/mod_1.asm to mpn/mod_1.asm
config.status: linking ./mpn/x86/mod_34lsub1.asm to mpn/mod_34lsub1.asm
config.status: linking ./mpn/x86/p6/mode1o.asm to mpn/mode1o.asm
config.status: linking ./mpn/generic/dump.c to mpn/dump.c
config.status: linking ./mpn/generic/mul.c to mpn/mul.c
config.status: linking ./mpn/generic/mul_fft.c to mpn/mul_fft.c
config.status: linking ./mpn/generic/mul_n.c to mpn/mul_n.c
config.status: linking ./mpn/x86/mul_basecase.asm to mpn/mul_basecase.asm
config.status: linking ./mpn/x86/p6/sqr_basecase.asm to mpn/sqr_basecase.asm
config.status: linking ./mpn/generic/random.c to mpn/random.c
config.status: linking ./mpn/generic/random2.c to mpn/random2.c
config.status: linking ./mpn/generic/sqrtrem.c to mpn/sqrtrem.c
config.status: linking ./mpn/generic/get_str.c to mpn/get_str.c
config.status: linking ./mpn/generic/set_str.c to mpn/set_str.c
config.status: linking ./mpn/generic/scan0.c to mpn/scan0.c
config.status: linking ./mpn/generic/scan1.c to mpn/scan1.c
config.status: linking ./mpn/x86/p6/p3mmx/popham.asm to mpn/popcount.asm
config.status: linking ./mpn/x86/p6/p3mmx/popham.asm to mpn/hamdist.asm
config.status: linking ./mpn/generic/cmp.c to mpn/cmp.c
config.status: linking ./mpn/generic/perfsqr.c to mpn/perfsqr.c
config.status: linking ./mpn/generic/bdivmod.c to mpn/bdivmod.c
config.status: linking ./mpn/generic/gcd_1.c to mpn/gcd_1.c
config.status: linking ./mpn/generic/gcd.c to mpn/gcd.c
config.status: linking ./mpn/generic/gcdext.c to mpn/gcdext.c
config.status: linking ./mpn/generic/tdiv_qr.c to mpn/tdiv_qr.c
config.status: linking ./mpn/generic/dc_divrem_n.c to mpn/dc_divrem_n.c
config.status: linking ./mpn/generic/sb_divrem_mn.c to mpn/sb_divrem_mn.c
config.status: linking ./mpn/generic/jacbase.c to mpn/jacbase.c
config.status: linking ./mpn/x86/copyi.asm to mpn/copyi.asm
config.status: linking ./mpn/x86/p6/copyd.asm to mpn/copyd.asm
config.status: linking ./mpn/x86/p6/gmp-mparam.h to gmp-mparam.h
#
#
#
# Subconfigure of GMP done
# ------------------------
#
checking for size of gmp limbs... 4
checking _SHORT_LIMB... no
checking _LONG_LONG_LIMB... no
checking for X... libraries /usr/X11R6/lib, headers /usr/X11R6/include
checking for dnet_ntoa in -ldnet... no
checking for dnet_ntoa in -ldnet_stub... no
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
-I/usr/X11R6/include
-L/usr/X11R6/lib

-lSM -lICE
checking for main in -lXaw... yes
checking for main in -lXmu... yes
checking for main in -lXt... yes
checking for main in -lXext... yes
checking for main in -lX11... yes
checking for bfd.h... no
checking size of long *... 4
checking for endian.h... no
checking finding DBEGIN... got 0x8000000
checking finding CSTACK_ADDRESS... got -1077938460
checking sizeof long long int... yes
checking for pagewidth... 12
checking for getcwd... yes
checking for getwd... yes
checking for uname... yes
checking for gettimeofday... yes
checking for sys/ioctl.h... yes
checking for BSDgettimeofday... no
checking for gettimeofday... (cached) yes
checking for gettimeofday declaration... present
checking for sin in -lm... yes
checking for main in -lmingwex... no
checking for math.h... yes
checking for values.h... no
checking for isnormal... checking for fpclass in ieeefp.h... no
checking for isfinite... checking for finite()... yes
checking for sockets... checking for connect... (cached) yes
checking for gethostbyname... (cached) yes
checking for main in -lreadline... yes
checking For network code for nsocket.c... yes
checking check for listen using fcntl... yes
checking for profil... yes
checking for setenv... yes
checking for _cleanup... yes
checking FIONBIO vs. O_NONBLOCK for nonblocking I/O... O_NONBLOCK
checking check for SV_ONSTACK... yes
checking check for SIGSYS... yes
checking check for SIGEMT... yes
checking for asm/sigcontext.h... no
checking for asm/signal.h... no
sigcontext in signal.h
checking for emacs... /usr/local/bin/emacs
checking emacs site lisp directory... /usr/local/share/emacs/21.2/site-lisp
checking emacs default.el... /usr/local/share/emacs/21.2/site-lisp/default.el
checking emacs info/dir... /usr/local/info/
checking for tcl/tk... checking for tclsh... tclsh8.0jp
checking for main in -llieee... no
using TK_VERSION=8.0jp in /usr/local/lib/tk8.0jp
checking alloca... yes
checking Checking for buggy gcc version from redhat... no
updating cache ./config.cache
creating ./config.status
creating makedefc
creating h/gclincl.h
makedefc

# begin makedefs

# use=386-linux

# for main link of raw_gcl
LIBS= -lm  -lbfd -liberty -lreadline -lncurses

#The multi precision library stuff
MPFILES=$(MPDIR)/@MPI_FILE@ $(MPDIR)/libmport.a


# root for the installation, eg /usr/local
# This would cause make install to create /usr/local/bin/gcl and
# /usr/local/lib/gcl-2-??/* with some basic files.
prefix=/usr/local

# where to place the info files
INFO_DIR=/usr/local/info/

# where to put emacs lisp files.
EMACS_SITE_LISP=/usr/local/share/emacs/21.2/site-lisp

# the default.el file
EMACS_DEFAULT_EL=/usr/local/share/emacs/21.2/site-lisp/default.el

# numerous TCL/TK variables culled from the tkConfig.sh and tclConfig.sh
# if these are found.
TK_CONFIG_PREFIX=/usr/local/lib/tk8.0jp
TK_LIBRARY=/usr/local/lib/tk8.0jp/../tk8.0jp
TCL_LIBRARY=/usr/local/lib/tk8.0jp/../tcl8.0jp
TK_XINCLUDES=-I/usr/X11R6/include
TK_INCLUDE=
TCL_INCLUDE=
TK_LIB_SPEC=-L/usr/local/lib -ltk80jp${TK_DBGX}
TK_BUILD_LIB_SPEC=-L/usr/ports/japanese/tk80/work/tk8.0.5/unix 
-ltk80jp${TK_DBGX}
TK_XLIBSW=-L/usr/X11R6/lib -lX11 -lxpg4
TK_XINCLUDES=-I/usr/X11R6/include
TCL_LIB_SPEC=-L/usr/local/lib -ltcl80jp${TCL_DBGX}
TCL_DL_LIBS=
TCL_LIBS=-lm

NOTIFY=yes
CC=gcc
CFLAGS=-Wall -DVOL=volatile -fsigned-char -fwritable-strings -pipe -O6 
-fomit-frame-pointer -I$(GCLDIR)/o
FINAL_CFLAGS=-Wall -DVOL=volatile -fsigned-char -fwritable-strings -pipe
O3FLAGS=-O6 -fomit-frame-pointer
O2FLAGS=-O

RL_OBJS=readline.o

RL_LIB=lsp/readline.o

MAKEINFO=makeinfo

FLISP=saved_gcl
BUILD_BFD=
GMPDIR=gmp3
X_LIBS= -L/usr/X11R6/lib -lXaw -lXmu -lXt -lXext -lX11
X_CFLAGS= -I/usr/X11R6/include

add-defs1 386-linux
using 386-linux.defs

% cat bin/makefile
DEFS    = -I../h 
CC      = cc
APPEND  = ../bin/append

-include ../makedefs

all:    dpp${EXE} ${APPEND}${EXE} file-sub${EXE}

dpp${EXE}:      pdpp.c
        ${CC} ${DEFS}  -DUNIX -o dpp${EXE} dpp.c

file-sub${EXE}: file-sub.c
        ${CC} ${DEFS} -o file-sub${EXE} file-sub.c

${APPEND}${EXE}: append.c
        ${CC}  ${DEFS} -o append${EXE}  append.c

clean:
        rm -f dpp${EXE} append${EXE} file-sub${EXE} core a.out *.o gcl gclm.bat

# end of log