[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[SCM] gawk branch, gawk-5.3-stable, updated. gawk-4.1.0-5528-g08cf1c6a
|
From: |
Arnold Robbins |
|
Subject: |
[SCM] gawk branch, gawk-5.3-stable, updated. gawk-4.1.0-5528-g08cf1c6a |
|
Date: |
Fri, 13 Sep 2024 06:56:24 -0400 (EDT) |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "gawk".
The branch, gawk-5.3-stable has been updated
via 08cf1c6a6047c4282190a07f846aaddcdf329941 (commit)
via 8659f0142c15b4e2109eea2e6188052021f6fc6d (commit)
from 5292ce3f3295deaf73e3bd4f8919c4f8aebdfa05 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=08cf1c6a6047c4282190a07f846aaddcdf329941
commit 08cf1c6a6047c4282190a07f846aaddcdf329941
Author: Arnold D. Robbins <arnold@skeeve.com>
Date: Fri Sep 13 13:56:09 2024 +0300
Update doc/wordlist.
diff --git a/doc/ChangeLog b/doc/ChangeLog
index f8ce52ee..8bc03789 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,6 +1,7 @@
2024-09-13 Arnold D. Robbins <arnold@skeeve.com>
* texinfo.tex: Updated from GNULIB.
+ * wordlist: Updated.
2024-09-12 Arnold D. Robbins <arnold@skeeve.com>
diff --git a/doc/wordlist b/doc/wordlist
index 565c3cab..56c09ae1 100644
--- a/doc/wordlist
+++ b/doc/wordlist
@@ -668,6 +668,7 @@ awk
awka
awkcard
awkcc
+awkdoc
awkforai
awkgo
awkgram
@@ -1583,6 +1584,7 @@ rand
randint
rankin
rapidjson
+raygard
rdev
rdquo
reada
@@ -1861,6 +1863,7 @@ vr
vrule
vskip
waitpid
+wak
walkarray
washington
wass
@@ -1868,6 +1871,7 @@ watchpoint
wb
wc
wcscoll
+weblog
webmail
weeknum
wget
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=8659f0142c15b4e2109eea2e6188052021f6fc6d
commit 8659f0142c15b4e2109eea2e6188052021f6fc6d
Author: Arnold D. Robbins <arnold@skeeve.com>
Date: Fri Sep 13 13:15:54 2024 +0300
Update build aux files.
diff --git a/build-aux/ChangeLog b/build-aux/ChangeLog
index 934ec5db..9cf0e529 100644
--- a/build-aux/ChangeLog
+++ b/build-aux/ChangeLog
@@ -1,3 +1,8 @@
+2024-09-13 Arnold D. Robbins <arnold@skeeve.com>
+
+ * ar-lib, compile, config.guess, config.rpath, config.sub,
+ depcomp, install-sh, texinfo.tex: Updated from GNULIB.
+
2023-11-02 Arnold D. Robbins <arnold@skeeve.com>
* 5.3.0: Release tar ball made.
diff --git a/build-aux/ar-lib b/build-aux/ar-lib
index 17de55e7..15219874 100755
--- a/build-aux/ar-lib
+++ b/build-aux/ar-lib
@@ -2,9 +2,9 @@
# Wrapper for Microsoft lib.exe
me=ar-lib
-scriptversion=2019-07-04.01; # UTC
+scriptversion=2024-06-19.01; # UTC
-# Copyright (C) 2010-2023 Free Software Foundation, Inc.
+# Copyright (C) 2010-2024 Free Software Foundation, Inc.
# Written by Peter Rosin <peda@lysator.liu.se>.
#
# This program is free software; you can redistribute it and/or modify
@@ -105,11 +105,15 @@ case $1 in
Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
Members may be specified in a file named with @FILE.
+
+Report bugs to <bug-automake@gnu.org>.
+GNU Automake home page: <https://www.gnu.org/software/automake/>.
+General help using GNU software: <https://www.gnu.org/gethelp/>.
EOF
exit $?
;;
-v | --v*)
- echo "$me, version $scriptversion"
+ echo "$me (GNU Automake) $scriptversion"
exit $?
;;
esac
diff --git a/build-aux/compile b/build-aux/compile
index ba883b54..49b3d05f 100755
--- a/build-aux/compile
+++ b/build-aux/compile
@@ -1,9 +1,9 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2018-03-07.03; # UTC
+scriptversion=2024-06-19.01; # UTC
-# Copyright (C) 1999-2023 Free Software Foundation, Inc.
+# Copyright (C) 1999-2024 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -143,7 +143,7 @@ func_cl_wrapper ()
# configure might choose to run compile as 'compile cc -o foo foo.c'.
eat=1
case $2 in
- *.o | *.[oO][bB][jJ])
+ *.o | *.lo | *.[oO][bB][jJ])
func_file_conv "$2"
set x "$@" -Fo"$file"
shift
@@ -248,11 +248,13 @@ If you are trying to build a whole package this is not the
right script to run: please start by reading the file 'INSTALL'.
Report bugs to <bug-automake@gnu.org>.
+GNU Automake home page: <https://www.gnu.org/software/automake/>.
+General help using GNU software: <https://www.gnu.org/gethelp/>.
EOF
exit $?
;;
-v | --v*)
- echo "compile $scriptversion"
+ echo "compile (GNU Automake) $scriptversion"
exit $?
;;
cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
diff --git a/build-aux/config.guess b/build-aux/config.guess
index cdfc4392..48a68460 100755
--- a/build-aux/config.guess
+++ b/build-aux/config.guess
@@ -1,10 +1,10 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2023 Free Software Foundation, Inc.
+# Copyright 1992-2024 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
-timestamp='2023-08-22'
+timestamp='2024-07-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -60,7 +60,7 @@ version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2023 Free Software Foundation, Inc.
+Copyright 1992-2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -123,7 +123,7 @@ set_cc_for_build() {
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
- for driver in cc gcc c89 c99 ; do
+ for driver in cc gcc c17 c99 c89 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ;
then
CC_FOR_BUILD=$driver
break
@@ -165,6 +165,8 @@ Linux|GNU|GNU/*)
LIBC=dietlibc
#elif defined(__GLIBC__)
LIBC=gnu
+ #elif defined(__LLVM_LIBC__)
+ LIBC=llvm
#else
#include <stdarg.h>
/* First heuristic to detect musl libc. */
@@ -632,7 +634,8 @@ EOF
sed 's/^ //' << EOF > "$dummy.c"
#include <sys/systemcfg.h>
- main()
+ int
+ main ()
{
if (!__power_pc())
exit(1);
@@ -716,7 +719,8 @@ EOF
#include <stdlib.h>
#include <unistd.h>
- int main ()
+ int
+ main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
@@ -1593,6 +1597,9 @@ EOF
*:Unleashed:*:*)
GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
;;
+ *:Ironclad:*:*)
+ GUESS=$UNAME_MACHINE-unknown-ironclad
+ ;;
esac
# Do we have a guess based on uname results?
@@ -1616,6 +1623,7 @@ cat > "$dummy.c" <<EOF
#endif
#endif
#endif
+int
main ()
{
#if defined (sony)
diff --git a/build-aux/config.rpath b/build-aux/config.rpath
index 1e2595ff..58870bd7 100755
--- a/build-aux/config.rpath
+++ b/build-aux/config.rpath
@@ -1,23 +1,15 @@
#! /bin/sh
# Output a system dependent set of variables, describing how to set the
-# run time search path of shared libraries in an executable.
+# run time search path of shared libraries in a binary (executable or
+# shared library).
#
-# Copyright 1996-2023 Free Software Foundation, Inc.
+# Copyright 1996-2024 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-#
-# The first argument passed to this file is the canonical host specification,
-# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
-# or
-# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
-# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
-# should be set by the caller.
-#
-# The set of defined variables is at the end of this script.
# Known limitations:
# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer
@@ -25,6 +17,81 @@
# known workaround is to choose shorter directory names for the build
# directory and/or the installation directory.
+# func_usage
+# outputs to stdout the --help usage message.
+func_usage ()
+{
+ echo "\
+Usage: config.rpath [OPTION] HOST
+
+Prints shell variable assignments that describe how to hardcode a directory
+for the lookup of shared libraries into a binary (executable or shared
library).
+
+The first argument passed to this file is the canonical host specification,
+ CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+or
+ CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+
+The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld
+should be set by the caller.
+
+The set of defined variables is at the end of this script.
+
+Options:
+ --help print this help and exit
+ --version print version information and exit
+
+Send patches and bug reports to <bug-gnulib@gnu.org>."
+}
+
+# func_version
+# outputs to stdout the --version message.
+func_version ()
+{
+ echo "config.rpath (GNU gnulib, module havelib)"
+ echo "Copyright (C) 2024 Free Software Foundation, Inc.
+License: All-Permissive.
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law."
+ echo
+ printf 'Written by %s.\n' "Bruno Haible"
+}
+
+# func_fatal_error message
+# outputs to stderr a fatal error message, and terminates the program.
+func_fatal_error ()
+{
+ echo "config.rpath: *** $1" 1>&2
+ echo "config.rpath: *** Stop." 1>&2
+ exit 1
+}
+
+# Command-line option processing.
+while test $# -gt 0; do
+ case "$1" in
+ --help | --hel | --he | --h )
+ func_usage
+ exit 0 ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v )
+ func_version
+ exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ -* )
+ func_fatal_error "unrecognized option: $1"
+ ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# -gt 1; then
+ func_fatal_error "too many arguments"
+fi
+if test $# -lt 1; then
+ func_fatal_error "too few arguments"
+fi
+
# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
diff --git a/build-aux/config.sub b/build-aux/config.sub
index defe52c0..4aaae46f 100755
--- a/build-aux/config.sub
+++ b/build-aux/config.sub
@@ -1,10 +1,10 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2023 Free Software Foundation, Inc.
+# Copyright 1992-2024 Free Software Foundation, Inc.
-# shellcheck disable=SC2006,SC2268 # see below for rationale
+# shellcheck disable=SC2006,SC2268,SC2162 # see below for rationale
-timestamp='2023-09-19'
+timestamp='2024-05-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -76,7 +76,7 @@ Report bugs and patches to <config-patches@gnu.org>."
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2023 Free Software Foundation, Inc.
+Copyright 1992-2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -120,7 +120,6 @@ case $# in
esac
# Split fields of configuration type
-# shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read field1 field2 field3 field4 <<EOF
$1
@@ -142,10 +141,20 @@ case $1 in
# parts
maybe_os=$field2-$field3
case $maybe_os in
- nto-qnx* | linux-* | uclinux-uclibc* \
- | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* |
netbsd*-gnu* \
- | netbsd*-eabi* | kopensolaris*-gnu* | cloudabi*-eabi* \
- | storm-chaos* | os2-emx* | rtmk-nova* | managarm-* \
+ cloudabi*-eabi* \
+ | kfreebsd*-gnu* \
+ | knetbsd*-gnu* \
+ | kopensolaris*-gnu* \
+ | linux-* \
+ | managarm-* \
+ | netbsd*-eabi* \
+ | netbsd*-gnu* \
+ | nto-qnx* \
+ | os2-emx* \
+ | rtmk-nova* \
+ | storm-chaos* \
+ | uclinux-gnu* \
+ | uclinux-uclibc* \
| windows-* )
basic_machine=$field1
basic_os=$maybe_os
@@ -161,8 +170,12 @@ case $1 in
esac
;;
*-*)
- # A lone config we happen to match not fitting any pattern
case $field1-$field2 in
+ # Shorthands that happen to contain a single dash
+ convex-c[12] | convex-c3[248])
+ basic_machine=$field2-convex
+ basic_os=
+ ;;
decstation-3100)
basic_machine=mips-dec
basic_os=
@@ -170,28 +183,88 @@ case $1 in
*-*)
# Second component is usually, but not always
the OS
case $field2 in
- # Prevent following clause from
handling this valid os
+ # Do not treat sunos as a manufacturer
sun*os*)
basic_machine=$field1
basic_os=$field2
;;
- zephyr*)
- basic_machine=$field1-unknown
- basic_os=$field2
- ;;
# Manufacturers
- dec* | mips* | sequent* | encore* |
pc533* | sgi* | sony* \
- | att* | 7300* | 3300* | delta* |
motorola* | sun[234]* \
- | unicom* | ibm* | next | hp | isi* |
apollo | altos* \
- | convergent* | ncr* | news | 32* |
3600* | 3100* \
- | hitachi* | c[123]* | convex* | sun |
crds | omron* | dg \
- | ultra | tti* | harris | dolphin |
highlevel | gould \
- | cbm | ns | masscomp | apple | axis |
knuth | cray \
- | microblaze* | sim | cisco \
- | oki | wec | wrs | winbond)
+ 3100* \
+ | 32* \
+ | 3300* \
+ | 3600* \
+ | 7300* \
+ | acorn \
+ | altos* \
+ | apollo \
+ | apple \
+ | atari \
+ | att* \
+ | axis \
+ | be \
+ | bull \
+ | cbm \
+ | ccur \
+ | cisco \
+ | commodore \
+ | convergent* \
+ | convex* \
+ | cray \
+ | crds \
+ | dec* \
+ | delta* \
+ | dg \
+ | digital \
+ | dolphin \
+ | encore* \
+ | gould \
+ | harris \
+ | highlevel \
+ | hitachi* \
+ | hp \
+ | ibm* \
+ | intergraph \
+ | isi* \
+ | knuth \
+ | masscomp \
+ | microblaze* \
+ | mips* \
+ | motorola* \
+ | ncr* \
+ | news \
+ | next \
+ | ns \
+ | oki \
+ | omron* \
+ | pc533* \
+ | rebel \
+ | rom68k \
+ | rombug \
+ | semi \
+ | sequent* \
+ | siemens \
+ | sgi* \
+ | siemens \
+ | sim \
+ | sni \
+ | sony* \
+ | stratus \
+ | sun \
+ | sun[234]* \
+ | tektronix \
+ | tti* \
+ | ultra \
+ | unicom* \
+ | wec \
+ | winbond \
+ | wrs)
basic_machine=$field1-$field2
basic_os=
;;
+ zephyr*)
+ basic_machine=$field1-unknown
+ basic_os=$field2
+ ;;
*)
basic_machine=$field1
basic_os=$field2
@@ -272,26 +345,6 @@ case $1 in
basic_machine=arm-unknown
basic_os=cegcc
;;
- convex-c1)
- basic_machine=c1-convex
- basic_os=bsd
- ;;
- convex-c2)
- basic_machine=c2-convex
- basic_os=bsd
- ;;
- convex-c32)
- basic_machine=c32-convex
- basic_os=bsd
- ;;
- convex-c34)
- basic_machine=c34-convex
- basic_os=bsd
- ;;
- convex-c38)
- basic_machine=c38-convex
- basic_os=bsd
- ;;
cray)
basic_machine=j90-cray
basic_os=unicos
@@ -714,15 +767,26 @@ case $basic_machine in
vendor=dec
basic_os=tops20
;;
- delta | 3300 | motorola-3300 | motorola-delta \
- | 3300-motorola | delta-motorola)
+ delta | 3300 | delta-motorola | 3300-motorola | motorola-delta |
motorola-3300)
cpu=m68k
vendor=motorola
;;
- dpx2*)
+ # This used to be dpx2*, but that gets the RS6000-based
+ # DPX/20 and the x86-based DPX/2-100 wrong. See
+ # https://oldskool.silicium.org/stations/bull_dpx20.htm
+ # https://www.feb-patrimoine.com/english/bull_dpx2.htm
+ # https://www.feb-patrimoine.com/english/unix_and_bull.htm
+ dpx2 | dpx2[23]00 | dpx2[23]xx)
cpu=m68k
vendor=bull
- basic_os=sysv3
+ ;;
+ dpx2100 | dpx21xx)
+ cpu=i386
+ vendor=bull
+ ;;
+ dpx20)
+ cpu=rs6000
+ vendor=bull
;;
encore | umax | mmax)
cpu=ns32k
@@ -837,18 +901,6 @@ case $basic_machine in
next | m*-next)
cpu=m68k
vendor=next
- case $basic_os in
- openstep*)
- ;;
- nextstep*)
- ;;
- ns2*)
- basic_os=nextstep2
- ;;
- *)
- basic_os=nextstep3
- ;;
- esac
;;
np1)
cpu=np1
@@ -937,7 +989,6 @@ case $basic_machine in
;;
*-*)
- # shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read cpu vendor <<EOF
$basic_machine
@@ -972,15 +1023,19 @@ unset -v basic_machine
# Decode basic machines in the full and proper CPU-Company form.
case $cpu-$vendor in
- # Here we handle the default manufacturer of certain CPU types in
canonical form. It is in
- # some cases the only manufacturer, in others, it is the most popular.
+ # Here we handle the default manufacturer of certain CPU types in
canonical form.
+ # It is in some cases the only manufacturer, in others, it is the most
popular.
+ c[12]-convex | c[12]-unknown | c3[248]-convex | c3[248]-unknown)
+ vendor=convex
+ basic_os=${basic_os:-bsd}
+ ;;
craynv-unknown)
vendor=cray
basic_os=${basic_os:-unicosmp}
;;
c90-unknown | c90-cray)
vendor=cray
- basic_os=${Basic_os:-unicos}
+ basic_os=${basic_os:-unicos}
;;
fx80-unknown)
vendor=alliant
@@ -1026,11 +1081,29 @@ case $cpu-$vendor in
vendor=alt
basic_os=${basic_os:-linux-gnueabihf}
;;
- dpx20-unknown | dpx20-bull)
- cpu=rs6000
- vendor=bull
+
+ # Normalized CPU+vendor pairs that imply an OS, if not otherwise
specified
+ m68k-isi)
+ basic_os=${basic_os:-sysv}
+ ;;
+ m68k-sony)
+ basic_os=${basic_os:-newsos}
+ ;;
+ m68k-tektronix)
+ basic_os=${basic_os:-bsd}
+ ;;
+ m88k-harris)
+ basic_os=${basic_os:-sysv3}
+ ;;
+ i386-bull | m68k-bull)
+ basic_os=${basic_os:-sysv3}
+ ;;
+ rs6000-bull)
basic_os=${basic_os:-bosx}
;;
+ mips-sni)
+ basic_os=${basic_os:-sysv4}
+ ;;
# Here we normalize CPU types irrespective of the vendor
amd64-*)
@@ -1038,7 +1111,7 @@ case $cpu-$vendor in
;;
blackfin-*)
cpu=bfin
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
c54x-*)
cpu=tic54x
@@ -1061,7 +1134,7 @@ case $cpu-$vendor in
;;
m68knommu-*)
cpu=m68k
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
m9s12z-* | m68hcs12z-* | hcs12z-* | s12z-*)
cpu=s12z
@@ -1071,7 +1144,7 @@ case $cpu-$vendor in
;;
parisc-*)
cpu=hppa
- basic_os=linux
+ basic_os=${basic_os:-linux}
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
cpu=i586
@@ -1085,9 +1158,6 @@ case $cpu-$vendor in
pentium4-*)
cpu=i786
;;
- pc98-*)
- cpu=i386
- ;;
ppc-* | ppcbe-*)
cpu=powerpc
;;
@@ -1121,9 +1191,6 @@ case $cpu-$vendor in
tx39el-*)
cpu=mipstx39el
;;
- x64-*)
- cpu=x86_64
- ;;
xscale-* | xscalee[bl]-*)
cpu=`echo "$cpu" | sed 's/^xscale/arm/'`
;;
@@ -1179,88 +1246,227 @@ case $cpu-$vendor in
# Recognize the canonical CPU types that are allowed with any
# company name.
case $cpu in
- 1750a | 580 \
+ 1750a \
+ | 580 \
+ | [cjt]90 \
| a29k \
- | aarch64 | aarch64_be | aarch64c | arm64ec \
+ | aarch64 \
+ | aarch64_be \
+ | aarch64c \
| abacus \
- | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] \
- | alpha64 | alpha64ev[4-8] | alpha64ev56 |
alpha64ev6[78] \
- | alphapca5[67] | alpha64pca5[67] \
+ | alpha \
+ | alpha64 \
+ | alpha64ev56 \
+ | alpha64ev6[78] \
+ | alpha64ev[4-8] \
+ | alpha64pca5[67] \
+ | alphaev56 \
+ | alphaev6[78] \
+ | alphaev[4-8] \
+ | alphapca5[67] \
| am33_2.0 \
| amdgcn \
- | arc | arceb | arc32 | arc64 \
- | arm | arm[lb]e | arme[lb] | armv* \
- | avr | avr32 \
+ | arc \
+ | arc32 \
+ | arc64 \
+ | arceb \
+ | arm \
+ | arm64e \
+ | arm64ec \
+ | arm[lb]e \
+ | arme[lb] \
+ | armv* \
| asmjs \
+ | avr \
+ | avr32 \
| ba \
- | be32 | be64 \
- | bfin | bpf | bs2000 \
- | c[123]* | c30 | [cjt]90 | c4x \
- | c8051 | clipper | craynv | csky | cydra \
- | d10v | d30v | dlx | dsp16xx \
- | e2k | elxsi | epiphany \
- | f30[01] | f700 | fido | fr30 | frv | ft32 | fx80 \
- | javascript \
- | h8300 | h8500 \
- | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | be32 \
+ | be64 \
+ | bfin \
+ | bpf \
+ | bs2000 \
+ | c30 \
+ | c4x \
+ | c8051 \
+ | c[123]* \
+ | clipper \
+ | craynv \
+ | csky \
+ | cydra \
+ | d10v \
+ | d30v \
+ | dlx \
+ | dsp16xx \
+ | e2k \
+ | elxsi \
+ | epiphany \
+ | f30[01] \
+ | f700 \
+ | fido \
+ | fr30 \
+ | frv \
+ | ft32 \
+ | fx80 \
+ | h8300 \
+ | h8500 \
| hexagon \
- | i370 | i*86 | i860 | i960 | ia16 | ia64 \
- | ip2k | iq2000 \
+ | hppa \
+ | hppa1.[01] \
+ | hppa2.0 \
+ | hppa2.0[nw] \
+ | hppa64 \
+ | i*86 \
+ | i370 \
+ | i860 \
+ | i960 \
+ | ia16 \
+ | ia64 \
+ | ip2k \
+ | iq2000 \
+ | javascript \
| k1om \
| kvx \
- | le32 | le64 \
+ | le32 \
+ | le64 \
| lm32 \
- | loongarch32 | loongarch64 \
- | m32c | m32r | m32rle \
- | m5200 | m68000 | m680[012346]0 | m68360 | m683?2 |
m68k \
- | m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x \
- | m88110 | m88k | maxq | mb | mcore | mep | metag \
- | microblaze | microblazeel \
+ | loongarch32 \
+ | loongarch64 \
+ | m32c \
+ | m32r \
+ | m32rle \
+ | m5200 \
+ | m68000 \
+ | m680[012346]0 \
+ | m6811 \
+ | m6812 \
+ | m68360 \
+ | m683?2 \
+ | m68hc11 \
+ | m68hc12 \
+ | m68hcs12x \
+ | m68k \
+ | m88110 \
+ | m88k \
+ | maxq \
+ | mb \
+ | mcore \
+ | mep \
+ | metag \
+ | microblaze \
+ | microblazeel \
| mips* \
| mmix \
- | mn10200 | mn10300 \
+ | mn10200 \
+ | mn10300 \
| moxie \
- | mt \
| msp430 \
- | nds32 | nds32le | nds32be \
+ | mt \
+ | nanomips* \
+ | nds32 \
+ | nds32be \
+ | nds32le \
| nfp \
- | nios | nios2 | nios2eb | nios2el \
- | none | np1 | ns16k | ns32k | nvptx \
+ | nios \
+ | nios2 \
+ | nios2eb \
+ | nios2el \
+ | none \
+ | np1 \
+ | ns16k \
+ | ns32k \
+ | nvptx \
| open8 \
| or1k* \
| or32 \
| orion \
+ | pdp10 \
+ | pdp11 \
| picochip \
- | pdp10 | pdp11 | pj | pjl | pn | power \
- | powerpc | powerpc64 | powerpc64le | powerpcle |
powerpcspe \
+ | pj \
+ | pjl \
+ | pn \
+ | power \
+ | powerpc \
+ | powerpc64 \
+ | powerpc64le \
+ | powerpcle \
+ | powerpcspe \
| pru \
| pyramid \
- | riscv | riscv32 | riscv32be | riscv64 | riscv64be \
- | rl78 | romp | rs6000 | rx \
- | s390 | s390x \
+ | riscv \
+ | riscv32 \
+ | riscv32be \
+ | riscv64 \
+ | riscv64be \
+ | rl78 \
+ | romp \
+ | rs6000 \
+ | rx \
+ | s390 \
+ | s390x \
| score \
- | sh | shl \
- | sh[1234] | sh[24]a | sh[24]ae[lb] | sh[23]e | she[lb]
| sh[lb]e \
- | sh[1234]e[lb] | sh[12345][lb]e | sh[23]ele | sh64 |
sh64le \
- | sparc | sparc64 | sparc64b | sparc64v | sparc86x |
sparclet \
+ | sh \
+ | sh64 \
+ | sh64le \
+ | sh[12345][lb]e \
+ | sh[1234] \
+ | sh[1234]e[lb] \
+ | sh[23]e \
+ | sh[23]ele \
+ | sh[24]a \
+ | sh[24]ae[lb] \
+ | sh[lb]e \
+ | she[lb] \
+ | shl \
+ | sparc \
+ | sparc64 \
+ | sparc64b \
+ | sparc64v \
+ | sparc86x \
+ | sparclet \
| sparclite \
- | sparcv8 | sparcv9 | sparcv9b | sparcv9v | sv1 | sx* \
+ | sparcv8 \
+ | sparcv9 \
+ | sparcv9b \
+ | sparcv9v \
| spu \
+ | sv1 \
+ | sx* \
| tahoe \
| thumbv7* \
- | tic30 | tic4x | tic54x | tic55x | tic6x | tic80 \
+ | tic30 \
+ | tic4x \
+ | tic54x \
+ | tic55x \
+ | tic6x \
+ | tic80 \
| tron \
| ubicom32 \
- | v70 | v850 | v850e | v850e1 | v850es | v850e2 |
v850e2v3 \
+ | v70 \
+ | v810 \
+ | v850 \
+ | v850e \
+ | v850e1 \
+ | v850e2 \
+ | v850e2v3 \
+ | v850es \
| vax \
+ | vc4 \
| visium \
| w65 \
- | wasm32 | wasm64 \
+ | wasm32 \
+ | wasm64 \
| we32k \
- | x86 | x86_64 | xc16x | xgate | xps100 \
- | xstormy16 | xtensa* \
+ | x86 \
+ | x86_64 \
+ | xc16x \
+ | xgate \
+ | xps100 \
+ | xstormy16 \
+ | xtensa* \
| ymp \
- | z8k | z80)
+ | z80 \
+ | z8k)
;;
*)
@@ -1305,7 +1511,6 @@ case $basic_os in
os=`echo "$basic_os" | sed -e 's|nto-qnx|qnx|'`
;;
*-*)
- # shellcheck disable=SC2162
saved_IFS=$IFS
IFS="-" read kernel os <<EOF
$basic_os
@@ -1352,6 +1557,23 @@ case $os in
unixware*)
os=sysv4.2uw
;;
+ # The marketing names for NeXT's operating systems were
+ # NeXTSTEP, NeXTSTEP 2, OpenSTEP 3, OpenSTEP 4. 'openstep' is
+ # mapped to 'openstep3', but 'openstep1' and 'openstep2' are
+ # mapped to 'nextstep' and 'nextstep2', consistent with the
+ # treatment of SunOS/Solaris.
+ ns | ns1 | nextstep | nextstep1 | openstep1)
+ os=nextstep
+ ;;
+ ns2 | nextstep2 | openstep2)
+ os=nextstep2
+ ;;
+ ns3 | nextstep3 | openstep | openstep3)
+ os=openstep3
+ ;;
+ ns4 | nextstep4 | openstep4)
+ os=openstep4
+ ;;
# es1800 is here to avoid being matched by es* (a different OS)
es1800*)
os=ose
@@ -1422,6 +1644,7 @@ case $os in
;;
utek*)
os=bsd
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|tektronix|'`
;;
dynix*)
os=bsd
@@ -1438,21 +1661,25 @@ case $os in
386bsd)
os=bsd
;;
- ctix* | uts*)
+ ctix*)
os=sysv
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|convergent|'`
;;
- nova*)
- os=rtmk-nova
+ uts*)
+ os=sysv
;;
- ns2)
- os=nextstep2
+ nova*)
+ kernel=rtmk
+ os=nova
;;
# Preserve the version number of sinix5.
sinix5.*)
os=`echo "$os" | sed -e 's|sinix|sysv|'`
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|sni|'`
;;
sinix*)
os=sysv4
+ vendor=`echo "$vendor" | sed -e 's|^unknown$|sni|'`
;;
tpf*)
os=tpf
@@ -1593,11 +1820,19 @@ case $cpu-$vendor in
os=
obj=elf
;;
+ # The -sgi and -siemens entries must be before the mips- entry
+ # or we get the wrong os.
+ *-sgi)
+ os=irix
+ ;;
+ *-siemens)
+ os=sysv4
+ ;;
mips*-cisco)
os=
obj=elf
;;
- mips*-*)
+ mips*-*|nanomips*-*)
os=
obj=elf
;;
@@ -1605,7 +1840,8 @@ case $cpu-$vendor in
os=
obj=coff
;;
- *-tti) # must be before sparc entry or we get the wrong os.
+ # This must be before the sparc-* entry or we get the wrong os.
+ *-tti)
os=sysv3
;;
sparc-* | *-sun)
@@ -1637,7 +1873,7 @@ case $cpu-$vendor in
os=hpux
;;
*-hitachi)
- os=hiux
+ os=hiuxwe2
;;
i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
os=sysv
@@ -1681,12 +1917,6 @@ case $cpu-$vendor in
*-encore)
os=bsd
;;
- *-sgi)
- os=irix
- ;;
- *-siemens)
- os=sysv4
- ;;
*-masscomp)
os=rtu
;;
@@ -1721,7 +1951,7 @@ fi
case $os in
# Sometimes we do "kernel-libc", so those need to count as OSes.
- musl* | newlib* | relibc* | uclibc*)
+ llvm* | musl* | newlib* | relibc* | uclibc*)
;;
# Likewise for "kernel-abi"
eabi* | gnueabi*)
@@ -1733,45 +1963,205 @@ case $os in
ghcjs)
;;
# Now accept the basic system types.
- # The portable systems comes first.
# Each alternative MUST end in a * to match a version number.
- gnu* | android* | bsd* | mach* | minix* | genix* | ultrix* | irix* \
- | *vms* | esix* | aix* | cnk* | sunos | sunos[34]* \
- | hpux* | unos* | osf* | luna* | dgux* | auroraux* | solaris* \
- | sym* | plan9* | psp* | sim* | xray* | os68k* | v88r* \
- | hiux* | abug | nacl* | netware* | windows* \
- | os9* | macos* | osx* | ios* | tvos* | watchos* \
- | mpw* | magic* | mmixware* | mon960* | lnews* \
- | amigaos* | amigados* | msdos* | newsos* | unicos* | aof* \
- | aos* | aros* | cloudabi* | sortix* | twizzler* \
- | nindy* | vxsim* | vxworks* | ebmon* | hms* | mvs* \
- | clix* | riscos* | uniplus* | iris* | isc* | rtu* | xenix* \
- | mirbsd* | netbsd* | dicos* | openedition* | ose* \
- | bitrig* | openbsd* | secbsd* | solidbsd* | libertybsd* | os108* \
- | ekkobsd* | freebsd* | riscix* | lynxos* | os400* \
- | bosx* | nextstep* | cxux* | oabi* \
- | ptx* | ecoff* | winnt* | domain* | vsta* \
- | udi* | lites* | ieee* | go32* | aux* | hcos* \
- | chorusrdb* | cegcc* | glidix* | serenity* \
- | cygwin* | msys* | moss* | proelf* | rtems* \
- | midipix* | mingw32* | mingw64* | mint* \
- | uxpv* | beos* | mpeix* | udk* | moxiebox* \
- | interix* | uwin* | mks* | rhapsody* | darwin* \
- | openstep* | oskit* | conix* | pw32* | nonstopux* \
- | storm-chaos* | tops10* | tenex* | tops20* | its* \
- | os2* | vos* | palmos* | uclinux* | nucleus* | morphos* \
- | scout* | superux* | sysv* | rtmk* | tpf* | windiss* \
- | powermax* | dnix* | nx6 | nx7 | sei* | dragonfly* \
- | skyos* | haiku* | rdos* | toppers* | drops* | es* \
- | onefs* | tirtos* | phoenix* | fuchsia* | redox* | bme* \
- | midnightbsd* | amdhsa* | unleashed* | emscripten* | wasi* \
- | nsk* | powerunix* | genode* | zvmoe* | qnx* | emx* | zephyr* \
- | fiwix* | mlibc* | cos* | mbr* )
+ abug \
+ | aix* \
+ | amdhsa* \
+ | amigados* \
+ | amigaos* \
+ | android* \
+ | aof* \
+ | aos* \
+ | aros* \
+ | atheos* \
+ | auroraux* \
+ | aux* \
+ | beos* \
+ | bitrig* \
+ | bme* \
+ | bosx* \
+ | bsd* \
+ | cegcc* \
+ | chorusos* \
+ | chorusrdb* \
+ | clix* \
+ | cloudabi* \
+ | cnk* \
+ | conix* \
+ | cos* \
+ | cxux* \
+ | cygwin* \
+ | darwin* \
+ | dgux* \
+ | dicos* \
+ | dnix* \
+ | domain* \
+ | dragonfly* \
+ | drops* \
+ | ebmon* \
+ | ecoff* \
+ | ekkobsd* \
+ | emscripten* \
+ | emx* \
+ | es* \
+ | fiwix* \
+ | freebsd* \
+ | fuchsia* \
+ | genix* \
+ | genode* \
+ | glidix* \
+ | gnu* \
+ | go32* \
+ | haiku* \
+ | hcos* \
+ | hiux* \
+ | hms* \
+ | hpux* \
+ | ieee* \
+ | interix* \
+ | ios* \
+ | iris* \
+ | irix* \
+ | ironclad* \
+ | isc* \
+ | its* \
+ | l4re* \
+ | libertybsd* \
+ | lites* \
+ | lnews* \
+ | luna* \
+ | lynxos* \
+ | mach* \
+ | macos* \
+ | magic* \
+ | mbr* \
+ | midipix* \
+ | midnightbsd* \
+ | mingw32* \
+ | mingw64* \
+ | minix* \
+ | mint* \
+ | mirbsd* \
+ | mks* \
+ | mlibc* \
+ | mmixware* \
+ | mon960* \
+ | morphos* \
+ | moss* \
+ | moxiebox* \
+ | mpeix* \
+ | mpw* \
+ | msdos* \
+ | msys* \
+ | mvs* \
+ | nacl* \
+ | netbsd* \
+ | netware* \
+ | newsos* \
+ | nextstep* \
+ | nindy* \
+ | nonstopux* \
+ | nova* \
+ | nsk* \
+ | nucleus* \
+ | nx6 \
+ | nx7 \
+ | oabi* \
+ | ohos* \
+ | onefs* \
+ | openbsd* \
+ | openedition* \
+ | openstep* \
+ | os108* \
+ | os2* \
+ | os400* \
+ | os68k* \
+ | os9* \
+ | ose* \
+ | osf* \
+ | oskit* \
+ | osx* \
+ | palmos* \
+ | phoenix* \
+ | plan9* \
+ | powermax* \
+ | powerunix* \
+ | proelf* \
+ | psos* \
+ | psp* \
+ | ptx* \
+ | pw32* \
+ | qnx* \
+ | rdos* \
+ | redox* \
+ | rhapsody* \
+ | riscix* \
+ | riscos* \
+ | rtems* \
+ | rtmk* \
+ | rtu* \
+ | scout* \
+ | secbsd* \
+ | sei* \
+ | serenity* \
+ | sim* \
+ | skyos* \
+ | solaris* \
+ | solidbsd* \
+ | sortix* \
+ | storm-chaos* \
+ | sunos \
+ | sunos[34]* \
+ | superux* \
+ | syllable* \
+ | sym* \
+ | sysv* \
+ | tenex* \
+ | tirtos* \
+ | toppers* \
+ | tops10* \
+ | tops20* \
+ | tpf* \
+ | tvos* \
+ | twizzler* \
+ | uclinux* \
+ | udi* \
+ | udk* \
+ | ultrix* \
+ | unicos* \
+ | uniplus* \
+ | unleashed* \
+ | unos* \
+ | uwin* \
+ | uxpv* \
+ | v88r* \
+ |*vms* \
+ | vos* \
+ | vsta* \
+ | vxsim* \
+ | vxworks* \
+ | wasi* \
+ | watchos* \
+ | wince* \
+ | windiss* \
+ | windows* \
+ | winnt* \
+ | xenix* \
+ | xray* \
+ | zephyr* \
+ | zvmoe* )
;;
# This one is extra strict with allowed versions
sco3.2v2 | sco3.2v[4-9]* | sco5v6*)
# Don't forget version if it is 3.2v4 or newer.
;;
+ # This refers to builds using the UEFI calling convention
+ # (which depends on the architecture) and PE file format.
+ # Note that this is both a different calling convention and
+ # different file format than that of GNU-EFI
+ # (x86_64-w64-mingw32).
+ uefi)
+ ;;
none)
;;
kernel* | msvc* )
@@ -1818,16 +2208,18 @@ esac
# As a final step for OS-related things, validate the OS-kernel combination
# (given a valid OS), if there is a kernel.
case $kernel-$os-$obj in
- linux-gnu*- | linux-dietlibc*- | linux-android*- | linux-newlib*- \
- | linux-musl*- | linux-relibc*- | linux-uclibc*- |
linux-mlibc*- )
+ linux-gnu*- | linux-android*- | linux-dietlibc*- | linux-llvm*- \
+ | linux-mlibc*- | linux-musl*- | linux-newlib*- \
+ | linux-relibc*- | linux-uclibc*- | linux-ohos*- )
;;
- uclinux-uclibc*- )
+ uclinux-uclibc*- | uclinux-gnu*- )
;;
managarm-mlibc*- | managarm-kernel*- )
;;
windows*-msvc*-)
;;
- -dietlibc*- | -newlib*- | -musl*- | -relibc*- | -uclibc*- | -mlibc*- )
+ -dietlibc*- | -llvm*- | -mlibc*- | -musl*- | -newlib*- | -relibc*- \
+ | -uclibc*- )
# These are just libc implementations, not actual OSes, and thus
# require a kernel.
echo "Invalid configuration '$1': libc '$os' needs explicit
kernel." 1>&2
@@ -1845,7 +2237,7 @@ case $kernel-$os-$obj in
echo "Invalid configuration '$1': '$os' needs 'windows'." 1>&2
exit 1
;;
- kfreebsd*-gnu*- | kopensolaris*-gnu*-)
+ kfreebsd*-gnu*- | knetbsd*-gnu*- | netbsd*-gnu*- | kopensolaris*-gnu*-)
;;
vxworks-simlinux- | vxworks-simwindows- | vxworks-spe-)
;;
@@ -1853,6 +2245,8 @@ case $kernel-$os-$obj in
;;
os2-emx-)
;;
+ rtmk-nova-)
+ ;;
*-eabi*- | *-gnueabi*-)
;;
none--*)
@@ -1879,7 +2273,7 @@ case $vendor in
*-riscix*)
vendor=acorn
;;
- *-sunos*)
+ *-sunos* | *-solaris*)
vendor=sun
;;
*-cnk* | *-aix*)
diff --git a/build-aux/depcomp b/build-aux/depcomp
index ecee3e78..1f0aa972 100755
--- a/build-aux/depcomp
+++ b/build-aux/depcomp
@@ -1,9 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2022-09-18.14; # UTC
+scriptversion=2024-06-19.01; # UTC
-# Copyright (C) 1999-2023 Free Software Foundation, Inc.
+# Copyright (C) 1999-2024 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -47,11 +47,13 @@ Environment variables:
libtool Whether libtool is used (yes/no).
Report bugs to <bug-automake@gnu.org>.
+GNU Automake home page: <https://www.gnu.org/software/automake/>.
+General help using GNU software: <https://www.gnu.org/gethelp/>.
EOF
exit $?
;;
-v | --v*)
- echo "depcomp $scriptversion"
+ echo "depcomp (GNU Automake) $scriptversion"
exit $?
;;
esac
@@ -127,7 +129,7 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed
's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
-# Avoid interferences from the environment.
+# Avoid interference from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
diff --git a/build-aux/install-sh b/build-aux/install-sh
index ec298b53..b1d7a6f6 100755
--- a/build-aux/install-sh
+++ b/build-aux/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2020-11-14.01; # UTC
+scriptversion=2024-06-19.01; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -124,9 +124,9 @@ it's up to you to specify -f if you want it.
If -S is not specified, no backups are attempted.
-Email bug reports to bug-automake@gnu.org.
-Automake home page: https://www.gnu.org/software/automake/
-"
+Report bugs to <bug-automake@gnu.org>.
+GNU Automake home page: <https://www.gnu.org/software/automake/>.
+General help using GNU software: <https://www.gnu.org/gethelp/>."
while test $# -ne 0; do
case $1 in
@@ -170,7 +170,7 @@ while test $# -ne 0; do
-T) is_target_a_directory=never;;
- --version) echo "$0 $scriptversion"; exit $?;;
+ --version) echo "$0 (GNU Automake) $scriptversion"; exit $?;;
--) shift
break;;
@@ -345,7 +345,7 @@ do
' 0
# Because "mkdir -p" follows existing symlinks and we likely work
- # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directly in world-writable /tmp, make sure that the '$tmpdir'
# directory is successfully created first before we actually test
# 'mkdir -p'.
if (umask $mkdir_umask &&
@@ -353,7 +353,7 @@ do
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
+ # Check for POSIX incompatibility with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
diff --git a/build-aux/texinfo.tex b/build-aux/texinfo.tex
index c96d4d7b..93d59219 100644
--- a/build-aux/texinfo.tex
+++ b/build-aux/texinfo.tex
@@ -1,11 +1,11 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2023-09-19.19}
+\def\texinfoversion{2024-02-10.22}
%
-% Copyright 1985, 1986, 1988, 1990-2023 Free Software Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990-2024 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
@@ -212,7 +212,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -425,7 +425,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argremovespace.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argremovespace#1$ $\ArgTerm}
@@ -1026,8 +1026,8 @@ where each line of input produces a line of output.}
end
end
}
- % The -2 in the arguments here gives all the input to TeX catcode 12
- % (other) or 10 (space), preventing undefined control sequence errors. See
+ % The -2 in the arguments here gives all the input to TeX catcode 12
+ % (other) or 10 (space), preventing undefined control sequence errors. See
% https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
%
\endgroup
@@ -1129,7 +1129,7 @@ where each line of input produces a line of output.}
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1421,7 +1421,7 @@ output) for that.)}
% We use the node names as the destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1444,7 +1444,7 @@ output) for that.)}
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -1670,7 +1670,7 @@ output) for that.)}
% We use node names as destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
@@ -2697,7 +2697,7 @@ end
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2743,7 +2743,7 @@ end
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\smartitaliccorrection}}%
\next
@@ -2922,7 +2922,7 @@ end
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -, or
@@ -3028,7 +3028,7 @@ end
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3041,7 +3041,7 @@ end
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3099,10 +3099,10 @@ end
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3121,10 +3121,10 @@ end
\def\wordnone{none}
% Allow a ragged right output to aid breaking long URL's. There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
% the line is sufficient), a break at the \penalty with extra glue added
% at the end of the line, or no break at all here.
-% Changing the value of the penalty and/or the amount of stretch affects how
+% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
\def\urefallowbreak{%
\penalty0\relax
@@ -3339,7 +3339,7 @@ $$%
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3347,7 +3347,7 @@ $$%
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3363,7 +3363,7 @@ $$%
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3649,7 +3649,7 @@ $$%
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3731,7 +3731,7 @@ $$%
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3785,7 +3785,7 @@ $$%
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4611,7 +4611,7 @@ $$%
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4635,7 +4635,7 @@ $$%
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4668,7 +4668,7 @@ $$%
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4774,7 +4774,7 @@ $$%
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-
+
% \definedummyword defines \#1 as \string\#1\space, thus effectively
% preventing its expansion. This is used only for control words,
% not control letters, because the \space would be incorrect for
@@ -4791,7 +4791,7 @@ $$%
\def\definedummyword #1{\def#1{\string#1\space}}%
\def\definedummyletter#1{\def#1{\string#1}}%
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands. Most of the commands are controlled through the
% \ifdummies conditional.
%
@@ -5081,7 +5081,7 @@ $$%
\let\value\indexnofontsvalue
}
-
+
% #1 is the index name, #2 is the entry text.
@@ -5122,7 +5122,7 @@ $$%
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5174,7 +5174,7 @@ $$%
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5238,14 +5238,14 @@ $$%
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters
in
-% index files, never standing for themselves.
+% Uncomment to use \ in index files by default. Old texi2dvi (before 2019)
+% didn't support @ as the escape character (as it checked for "\entry" in
+% the files, and not "@entry").
+% In the future we can remove this flag and simplify the code for
+% index files and backslashes, once the support is no longer likely to be
+% useful.
%
-\set txiindexescapeisbackslash
+% \set txiindexescapeisbackslash
% Write the entry in \indextext to the index file.
%
@@ -5266,7 +5266,7 @@ $$%
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5447,18 +5447,18 @@ $$%
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\ifflagclear{txiskipindexfileswithbackslash}{%
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
}{%
@@ -5531,7 +5531,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5851,7 +5851,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5879,7 +5879,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6137,8 +6137,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally unnmhead0 calls unnumberedzzz:
\outer\parseargdef\unnumbered{\unnmhead0{#1}}
\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
+ \global\advance\unnumberedno by 1
%
% Since an unnumbered has no number, no prefix for figures.
\global\let\chaplevelprefix = \empty
@@ -6176,7 +6175,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6194,12 +6193,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally calls unnumberedseczzz:
\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno}%
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6218,13 +6217,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally calls unnumberedsubseczzz:
\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{subsec}{Ynothing}{\the\unnumberedno}%
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -6244,9 +6242,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally unnumberedsubsubseczzz:
\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{subsubsec}{Ynothing}{\the\unnumberedno}%
}
% These macros control what the section commands do, according
@@ -7409,7 +7406,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7723,7 +7720,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7893,7 +7890,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -8043,7 +8040,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means
cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8205,8 +8202,6 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\commondummyword\unmacrodo
\xdef\macrolist{\macrolist}%
\endgroup
- \else
- \errmessage{Macro #1 not defined}%
\fi
}
@@ -8238,7 +8233,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8272,7 +8267,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
+%
% We are in \macrobodyctxt, and the \xdef causes backslashes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \macrodef.
@@ -8307,7 +8302,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8392,7 +8387,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8416,9 +8411,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8456,7 +8451,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8534,7 +8529,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8578,11 +8573,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8604,11 +8599,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8632,9 +8627,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8646,13 +8641,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8664,7 +8659,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8787,7 +8782,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8869,7 +8864,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8885,7 +8880,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -9083,20 +9078,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\space\putwordpage\tie\refx{#1-pg}}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9188,9 +9183,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a
float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9206,10 +9201,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files
with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -10406,7 +10401,7 @@ directory should work if nowhere else does.}
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10439,7 +10434,7 @@ directory should work if nowhere else does.}
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10451,7 +10446,7 @@ directory should work if nowhere else does.}
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10490,7 +10485,7 @@ directory should work if nowhere else does.}
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10525,7 +10520,7 @@ directory should work if nowhere else does.}
% U+0080..U+00FF =
https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11770,7 +11765,7 @@ directory should work if nowhere else does.}
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
\setregularquotes
\let\b = \strong
diff --git a/doc/ChangeLog b/doc/ChangeLog
index dc757096..f8ce52ee 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,7 @@
+2024-09-13 Arnold D. Robbins <arnold@skeeve.com>
+
+ * texinfo.tex: Updated from GNULIB.
+
2024-09-12 Arnold D. Robbins <arnold@skeeve.com>
* gawk.texi (Programs Exercises): Add two exercises related
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index c96d4d7b..93d59219 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -1,11 +1,11 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2023-09-19.19}
+\def\texinfoversion{2024-02-10.22}
%
-% Copyright 1985, 1986, 1988, 1990-2023 Free Software Foundation, Inc.
+% Copyright 1985, 1986, 1988, 1990-2024 Free Software Foundation, Inc.
%
% This texinfo.tex file is free software: you can redistribute it and/or
% modify it under the terms of the GNU General Public License as
@@ -212,7 +212,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -425,7 +425,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argremovespace.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argremovespace#1$ $\ArgTerm}
@@ -1026,8 +1026,8 @@ where each line of input produces a line of output.}
end
end
}
- % The -2 in the arguments here gives all the input to TeX catcode 12
- % (other) or 10 (space), preventing undefined control sequence errors. See
+ % The -2 in the arguments here gives all the input to TeX catcode 12
+ % (other) or 10 (space), preventing undefined control sequence errors. See
% https://lists.gnu.org/archive/html/bug-texinfo/2019-08/msg00031.html
%
\endgroup
@@ -1129,7 +1129,7 @@ where each line of input produces a line of output.}
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1421,7 +1421,7 @@ output) for that.)}
% We use the node names as the destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\numchapentry##1##2##3##4{%
\dopdfoutline{##2 ##1}{count-\expnumber{chap##2}}{##3}{##4}}%
@@ -1444,7 +1444,7 @@ output) for that.)}
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -1670,7 +1670,7 @@ output) for that.)}
% We use node names as destinations.
%
% Currently we prefix the section name with the section number
- % for chapter and appendix headings only in order to avoid too much
+ % for chapter and appendix headings only in order to avoid too much
% horizontal space being required in the PDF viewer.
\def\partentry##1##2##3##4{}% ignore parts in the outlines
\def\numchapentry##1##2##3##4{%
@@ -2697,7 +2697,7 @@ end
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2743,7 +2743,7 @@ end
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\smartitaliccorrection}}%
\next
@@ -2922,7 +2922,7 @@ end
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -, or
@@ -3028,7 +3028,7 @@ end
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3041,7 +3041,7 @@ end
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3099,10 +3099,10 @@ end
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3121,10 +3121,10 @@ end
\def\wordnone{none}
% Allow a ragged right output to aid breaking long URL's. There can
-% be a break at the \allowbreak with no extra glue (if the existing stretch in
+% be a break at the \allowbreak with no extra glue (if the existing stretch in
% the line is sufficient), a break at the \penalty with extra glue added
% at the end of the line, or no break at all here.
-% Changing the value of the penalty and/or the amount of stretch affects how
+% Changing the value of the penalty and/or the amount of stretch affects how
% preferable one choice is over the other.
\def\urefallowbreak{%
\penalty0\relax
@@ -3339,7 +3339,7 @@ $$%
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3347,7 +3347,7 @@ $$%
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3363,7 +3363,7 @@ $$%
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3649,7 +3649,7 @@ $$%
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3731,7 +3731,7 @@ $$%
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3785,7 +3785,7 @@ $$%
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4611,7 +4611,7 @@ $$%
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4635,7 +4635,7 @@ $$%
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4668,7 +4668,7 @@ $$%
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4774,7 +4774,7 @@ $$%
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\docind{\indexname}{#1}}
-
+
% \definedummyword defines \#1 as \string\#1\space, thus effectively
% preventing its expansion. This is used only for control words,
% not control letters, because the \space would be incorrect for
@@ -4791,7 +4791,7 @@ $$%
\def\definedummyword #1{\def#1{\string#1\space}}%
\def\definedummyletter#1{\def#1{\string#1}}%
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands. Most of the commands are controlled through the
% \ifdummies conditional.
%
@@ -5081,7 +5081,7 @@ $$%
\let\value\indexnofontsvalue
}
-
+
% #1 is the index name, #2 is the entry text.
@@ -5122,7 +5122,7 @@ $$%
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5174,7 +5174,7 @@ $$%
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5238,14 +5238,14 @@ $$%
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters
in
-% index files, never standing for themselves.
+% Uncomment to use \ in index files by default. Old texi2dvi (before 2019)
+% didn't support @ as the escape character (as it checked for "\entry" in
+% the files, and not "@entry").
+% In the future we can remove this flag and simplify the code for
+% index files and backslashes, once the support is no longer likely to be
+% useful.
%
-\set txiindexescapeisbackslash
+% \set txiindexescapeisbackslash
% Write the entry in \indextext to the index file.
%
@@ -5266,7 +5266,7 @@ $$%
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5447,18 +5447,18 @@ $$%
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\ifflagclear{txiskipindexfileswithbackslash}{%
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
}{%
@@ -5531,7 +5531,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5851,7 +5851,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5879,7 +5879,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6137,8 +6137,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally unnmhead0 calls unnumberedzzz:
\outer\parseargdef\unnumbered{\unnmhead0{#1}}
\def\unnumberedzzz#1{%
- \global\secno=0 \global\subsecno=0 \global\subsubsecno=0
- \global\advance\unnumberedno by 1
+ \global\advance\unnumberedno by 1
%
% Since an unnumbered has no number, no prefix for figures.
\global\let\chaplevelprefix = \empty
@@ -6176,7 +6175,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6194,12 +6193,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally calls unnumberedseczzz:
\outer\parseargdef\unnumberedsec{\unnmhead1{#1}}
\def\unnumberedseczzz#1{%
- \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
- \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno}%
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6218,13 +6217,12 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally calls unnumberedsubseczzz:
\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}}
\def\unnumberedsubseczzz#1{%
- \global\subsubsecno=0 \global\advance\subsecno by 1
- \sectionheading{#1}{subsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{subsec}{Ynothing}{\the\unnumberedno}%
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -6244,9 +6242,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% normally unnumberedsubsubseczzz:
\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}}
\def\unnumberedsubsubseczzz#1{%
- \global\advance\subsubsecno by 1
- \sectionheading{#1}{subsubsec}{Ynothing}%
- {\the\unnumberedno.\the\secno.\the\subsecno.\the\subsubsecno}%
+ \global\advance\unnumberedno by 1
+ \sectionheading{#1}{subsubsec}{Ynothing}{\the\unnumberedno}%
}
% These macros control what the section commands do, according
@@ -7409,7 +7406,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7723,7 +7720,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7893,7 +7890,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -8043,7 +8040,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means
cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8205,8 +8202,6 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\commondummyword\unmacrodo
\xdef\macrolist{\macrolist}%
\endgroup
- \else
- \errmessage{Macro #1 not defined}%
\fi
}
@@ -8238,7 +8233,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8272,7 +8267,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
+%
% We are in \macrobodyctxt, and the \xdef causes backslashes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \macrodef.
@@ -8307,7 +8302,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8392,7 +8387,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8416,9 +8411,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8456,7 +8451,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8534,7 +8529,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8578,11 +8573,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8604,11 +8599,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8632,9 +8627,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8646,13 +8641,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8664,7 +8659,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8787,7 +8782,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8869,7 +8864,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8885,7 +8880,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -9083,20 +9078,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\space\putwordpage\tie\refx{#1-pg}}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9188,9 +9183,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a
float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9206,10 +9201,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files
with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -10406,7 +10401,7 @@ directory should work if nowhere else does.}
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10439,7 +10434,7 @@ directory should work if nowhere else does.}
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10451,7 +10446,7 @@ directory should work if nowhere else does.}
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10490,7 +10485,7 @@ directory should work if nowhere else does.}
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10525,7 +10520,7 @@ directory should work if nowhere else does.}
% U+0080..U+00FF =
https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11770,7 +11765,7 @@ directory should work if nowhere else does.}
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
\setregularquotes
\let\b = \strong
-----------------------------------------------------------------------
Summary of changes:
build-aux/ChangeLog | 5 +
build-aux/ar-lib | 10 +-
build-aux/compile | 10 +-
build-aux/config.guess | 20 +-
build-aux/config.rpath | 89 +++++-
build-aux/config.sub | 752 +++++++++++++++++++++++++++++++++++++------------
build-aux/depcomp | 10 +-
build-aux/install-sh | 14 +-
build-aux/texinfo.tex | 215 +++++++-------
doc/ChangeLog | 5 +
doc/texinfo.tex | 215 +++++++-------
doc/wordlist | 4 +
12 files changed, 915 insertions(+), 434 deletions(-)
hooks/post-receive
--
gawk
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [SCM] gawk branch, gawk-5.3-stable, updated. gawk-4.1.0-5528-g08cf1c6a,
Arnold Robbins <=