[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[gawk-diffs] [SCM] gawk branch, gawk-4.1-stable, updated. gawk-4.1.0-737
|
From: |
Arnold Robbins |
|
Subject: |
[gawk-diffs] [SCM] gawk branch, gawk-4.1-stable, updated. gawk-4.1.0-737-g3e762b6 |
|
Date: |
Fri, 25 Sep 2015 10:41:17 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "gawk".
The branch, gawk-4.1-stable has been updated
via 3e762b6f62061974d152dd251f3e83cacca073e3 (commit)
from e982b94885a2c9136fe37322d8b96346837f9389 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://git.sv.gnu.org/cgit/gawk.git/commit/?id=3e762b6f62061974d152dd251f3e83cacca073e3
commit 3e762b6f62061974d152dd251f3e83cacca073e3
Author: Arnold D. Robbins <address@hidden>
Date: Fri Sep 25 13:41:00 2015 +0300
Update infrastructure files.
diff --git a/ChangeLog b/ChangeLog
index 2d89bc3..caccdef 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,7 @@
+2015-09-25 Arnold D. Robbins <address@hidden>
+
+ * config.guess, config.sub, config.rpath: Updated.
+
2015-09-18 Arnold D. Robbins <address@hidden>
* field.c (fpat_parse_field): Always use rp->non_empty instead
diff --git a/config.guess b/config.guess
index f7eb141..3c022c5 100755
--- a/config.guess
+++ b/config.guess
@@ -2,7 +2,7 @@
# Attempt to guess a canonical system name.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-03-04'
+timestamp='2015-09-14'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -221,7 +221,7 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d.
-f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
@@ -249,6 +249,9 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
+ *:Sortix:*:*)
+ echo ${UNAME_MACHINE}-unknown-sortix
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -962,6 +965,9 @@ EOF
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
+ k1om:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -1038,7 +1044,7 @@ EOF
echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
diff --git a/config.rpath b/config.rpath
index b625621..a3e25c8 100755
--- a/config.rpath
+++ b/config.rpath
@@ -2,7 +2,7 @@
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2014 Free Software Foundation, Inc.
+# Copyright 1996-2015 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
diff --git a/config.sub b/config.sub
index 8f1229c..1acc966 100755
--- a/config.sub
+++ b/config.sub
@@ -2,7 +2,7 @@
# Configuration validation subroutine script.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-03-08'
+timestamp='2015-08-20'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -255,6 +255,7 @@ case $basic_machine in
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
+ | ba \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
@@ -305,7 +306,7 @@ case $basic_machine in
| riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet |
sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -376,6 +377,7 @@ case $basic_machine in
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
@@ -428,12 +430,13 @@ case $basic_machine in
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
+ | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-*
| sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
@@ -1376,7 +1379,7 @@ case $os in
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* |
-solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* | -cloudabi* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
diff --git a/doc/ChangeLog b/doc/ChangeLog
index 6062121..e4166b8 100644
--- a/doc/ChangeLog
+++ b/doc/ChangeLog
@@ -1,3 +1,7 @@
+2015-09-25 Arnold D. Robbins <address@hidden>
+
+ * texinfo.tex: Update to latest.
+
2015-08-14 Arnold D. Robbins <address@hidden>
* gawktexi.in: Typo fixes in Appendix A.
diff --git a/doc/texinfo.tex b/doc/texinfo.tex
index 152e985..347f863 100644
--- a/doc/texinfo.tex
+++ b/doc/texinfo.tex
@@ -3,7 +3,7 @@
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
-\def\texinfoversion{2015-05-06.11}
+\def\texinfoversion{2015-09-23.01}
%
% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
% 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
@@ -196,17 +196,6 @@
wide-spread wrap-around
}
-% Margin to add to right of even pages, to left of odd pages.
-\newdimen\bindingoffset
-\newdimen\normaloffset
-\newdimen\pagewidth \newdimen\pageheight
-
-% For a final copy, take out the rectangles
-% that mark overfull boxes (in case you have decided
-% that the text looks ok even though it passes the margin).
-%
-\def\finalout{\overfullrule=0pt }
-
% Sometimes it is convenient to have everything in the transcript file
% and nothing on the terminal. We don't just call \tracingall here,
% since that produces some useless output on the terminal. We also make
@@ -251,6 +240,15 @@
\def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount
\removelastskip\penalty-200\bigskip\fi\fi}
+% Output routine
+%
+
+% For a final copy, take out the rectangles
+% that mark overfull boxes (in case you have decided
+% that the text looks ok even though it passes the margin).
+%
+\def\finalout{\overfullrule=0pt }
+
% Do @cropmarks to get crop marks.
%
\newif\ifcropmarks
@@ -277,6 +275,7 @@
% described on page 260 of The TeXbook. It involves outputting two
% marks for the sectioning macros, one before the section break, and
% one after. I won't pretend I can describe this better than DEK...
+%
\def\domark{%
\toks0=\expandafter{\lastchapterdefs}%
\toks2=\expandafter{\lastsectiondefs}%
@@ -289,6 +288,9 @@
\noexpand\else \the\toks8 % 2: color marks
}%
}
+
+% \gettopheadingmarks, \getbottomheadingmarks - extract needed part of mark.
+%
% \topmark doesn't work for the very first chapter (after the title
% page or the contents), so we use \firstmark there -- this gets us
% the mark with the chapter defs, unless the user sneaks in, e.g.,
@@ -304,36 +306,74 @@
% Avoid "undefined control sequence" errors.
\def\lastchapterdefs{}
\def\lastsectiondefs{}
+\def\lastsection{}
\def\prevchapterdefs{}
\def\prevsectiondefs{}
\def\lastcolordefs{}
+% Margin to add to right of even pages, to left of odd pages.
+\newdimen\bindingoffset
+\newdimen\normaloffset
+\newdimen\pagewidth \newdimen\pageheight
+
% Main output routine.
+%
\chardef\PAGE = 255
\output = {\onepageout{\pagecontents\PAGE}}
\newbox\headlinebox
\newbox\footlinebox
-% \onepageout takes a vbox as an argument. Note that \pagecontents
-% does insertions, but you have to call it yourself.
+% \onepageout takes a vbox as an argument.
+% \shipout a vbox for a single page, adding an optional header, footer,
+% cropmarks, and footnote. This also causes index entries for this page
+% to be written to the auxiliary files.
+%
\def\onepageout#1{%
\ifcropmarks \hoffset=0pt \else \hoffset=\normaloffset \fi
%
\ifodd\pageno \advance\hoffset by \bindingoffset
\else \advance\hoffset by -\bindingoffset\fi
%
+ % Common context changes for both heading and footing.
% Do this outside of the \shipout so @code etc. will be expanded in
% the headline as they should be, not taken literally (outputting ''code).
\def\commmonheadfootline{\let\hsize=\pagewidth \texinfochars}
%
- \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
- \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
+ % Retrieve the information for the headings from the marks in the page,
+ % and call Plain TeX's \makeheadline and \makefootline, which use the
+ % values in \headline and \footline.
%
+ % This is used to check if we are on the first page of a chapter.
+ \ifcase0\topmark\fi
+ \ifx\thischapter\empty
+ % See comment for \gettopheadingmarks
+ \ifcase0\firstmark\fi
+ \let\curchaptername\thischaptername
+ \ifcase1\firstmark\fi
+ \let\prevchaptername\thischaptername
+ \else
+ \let\curchaptername\thischaptername
+ \ifcase1\topmark\fi
+ \let\prevchaptername\thischaptername
+ \fi
+ %
+ \ifodd\pageno \getoddheadingmarks \else \getevenheadingmarks \fi
\ifodd\pageno \getoddfootingmarks \else \getevenfootingmarks \fi
+ %
+ \ifx\curchaptername\prevchaptername
+ \else
+ % If on the first page of a chapter, clear @thischapter so it
+ % doesn't appear in the headline, because the chapter is already
+ % shown in the chapter heading.
+ \def\thischapter{}%
+ \fi
+ %
+ \global\setbox\headlinebox = \vbox{\commmonheadfootline \makeheadline}%
\global\setbox\footlinebox = \vbox{\commmonheadfootline \makefootline}%
%
{%
+ % Set context for writing to auxiliary files like index files.
% Have to do this stuff outside the \shipout because we want it to
% take effect in \write's, yet the group defined by the \vbox ends
% before the \shipout runs.
@@ -342,10 +382,10 @@
\normalturnoffactive % \ in index entries must not stay \, e.g., if
% the page break happens to be in the middle of an example.
% We don't want .vr (or whatever) entries like this:
- % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}}
+ % \entry{{\indexbackslash }acronym}{32}{\code {\acronym}}
% "\acronym" won't work when it's read back in;
% it needs to be
- % {\code {{\tt \backslashcurfont }acronym}
+ % {\code {{\backslashcurfont }acronym}
\shipout\vbox{%
% Do this early so pdf references go to the beginning of the page.
\ifpdfmakepagedest \pdfdest name{\the\pageno} xyz\fi
@@ -403,6 +443,7 @@
\newinsert\margin \dimen\margin=\maxdimen
+% Main part of page, including any footnotes
\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}}
{\catcode`\@ =11
\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi
@@ -425,9 +466,13 @@
\def\nsbot{\vbox
{\hrule height\cornerlong depth\cornerthick width\cornerthick}}
+
+% Argument parsing
+
% Parse an argument, then pass it to #1. The argument is the rest of
% the input line (except we remove a trailing comment). #1 should be a
% macro which expects an ordinary undelimited TeX argument.
+% For example, \def\foo{\parsearg\fooxxx}.
%
\def\parsearg{\parseargusing{}}
\def\parseargusing#1#2{%
@@ -446,9 +491,11 @@
}%
}
-% First remove any @comment, then any @c comment.
+% First remove any @comment, then any @c comment. Also remove a @texinfoc
+% comment (see \scanmacro for details). Pass the result on to \argcheckspaces.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
-\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
+\def\argremovec#1\c#2\ArgTerm{\argremovetexinfoc #1\texinfoc\ArgTerm}
+\def\argremovetexinfoc#1\texinfoc#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
% Each occurrence of `\^^M' or `<space>\^^M' is replaced by a single space.
%
@@ -680,6 +727,12 @@
\endgraf % Not \par, as it may have been set to \lisppar.
\global\dimen1 = \prevdepth
\egroup % End the \vtop.
+ \addgroupbox
+ \prevdepth = \dimen1
+ \checkinserts
+}
+
+\def\addgroupbox{
% \dimen0 is the vertical size of the group's box.
\dimen0 = \ht\groupbox \advance\dimen0 by \dp\groupbox
% \dimen2 is how much space is left on the page (more or less).
@@ -692,9 +745,8 @@
\fi
\fi
\box\groupbox
- \prevdepth = \dimen1
- \checkinserts
}
+
%
% TeX puts in an \escapechar (i.e., `@') at the beginning of the help
% message, so this ends up printing address@hidden can only ...'.
@@ -937,12 +989,20 @@ where each line of input produces a line of output.}
% @c is the same as @comment
% @ignore ... @end ignore is another way to write a comment
%
-\def\comment{\begingroup \catcode`\^^M=\other%
+\def\comment{\begingroup \catcode`\^^M=\active%
address@hidden \catcode`\{=\other \catcode`\}=\other\commentxxx}%
+
+{\catcode`\^^M=\active%
+\gdef\commentxxx#1^^M{\endgroup%
+\futurelet\nexttoken\commentxxxx}%
+\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}%
+}
+
+\def\c{\begingroup \catcode`\^^M=\active%
address@hidden \catcode`\{=\other \catcode`\}=\other%
-\commentxxx}
-{\catcode`\^^M=\other \gdef\commentxxx#1^^M{\endgroup}}
-%
-\let\c=\comment
+\cxxx}
+{\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
+% See comment in \scanmacro about why the definitions of @c and @comment differ
% @paragraphindent NCHARS
% We'll use ems for NCHARS, close enough.
@@ -1028,45 +1088,8 @@ where each line of input produces a line of output.}
% @refill is a no-op.
\let\refill=\relax
-% If working on a large document in chapters, it is convenient to
-% be able to disable indexing, cross-referencing, and contents, for test runs.
-% This is done with @novalidate (before @setfilename).
-%
-\newif\iflinks \linkstrue % by default we want the aux files.
-\let\novalidate = \linksfalse
-
-% @setfilename is done at the beginning of every texinfo file.
-% So open here the files we need to have open while reading the input.
-% This makes it possible to make a .fmt file for texinfo.
-\def\setfilename{%
- \fixbackslash % Turn off hack to swallow `\input texinfo'.
- \iflinks
- \tryauxfile
- % Open the new aux file. TeX will close it automatically at exit.
- \immediate\openout\auxfile=\jobname.aux
- \fi % \openindices needs to do some work in any case.
- \openindices
- \let\setfilename=\comment % Ignore extra @setfilename cmds.
- %
- % If texinfo.cnf is present on the system, read it.
- % Useful for site-wide @afourpaper, etc.
- \openin 1 texinfo.cnf
- \ifeof 1 \else \input texinfo.cnf \fi
- \closein 1
- %
- \comment % Ignore the actual filename.
-}
-
-% Called from \setfilename.
-%
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
-}
+% @setfilename INFO-FILENAME - ignored
+\let\setfilename=\comment
% @bye.
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
@@ -1820,8 +1843,10 @@ end
% A few fonts for @defun names and args.
\setfont\defbf\bfshape{10}{\magstep1}{OT1}
\setfont\deftt\ttshape{10}{\magstep1}{OT1TT}
+\setfont\defsl\slshape{10}{\magstep1}{OT1TT}
\setfont\defttsl\ttslshape{10}{\magstep1}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf
+\let\tenttsl=\defttsl \let\tensl=\defsl \bf}
% Fonts for indices, footnotes, small examples (9pt).
\def\smallnominalsize{9pt}
@@ -1882,6 +1907,7 @@ end
% Section fonts (14.4pt).
\def\secnominalsize{14pt}
\setfont\secrm\rmbshape{12}{\magstep1}{OT1}
+\setfont\secrmnotbold\rmshape{12}{\magstep1}{OT1}
\setfont\secit\itbshape{10}{\magstep2}{OT1IT}
\setfont\secsl\slbshape{10}{\magstep2}{OT1}
\setfont\sectt\ttbshape{12}{\magstep1}{OT1TT}
@@ -1951,8 +1977,10 @@ end
% A few fonts for @defun names and args.
\setfont\defbf\bfshape{10}{\magstephalf}{OT1}
\setfont\deftt\ttshape{10}{\magstephalf}{OT1TT}
+\setfont\defsl\slshape{10}{\magstephalf}{OT1TT}
\setfont\defttsl\ttslshape{10}{\magstephalf}{OT1TT}
-\def\df{\let\tentt=\deftt \let\tenbf = \defbf \let\tenttsl=\defttsl \bf}
+\def\df{\let\tentt=\deftt \let\tenbf = \defbf
+\let\tensl=\defsl \let\tenttsl=\defttsl \bf}
% Fonts for indices, footnotes, small examples (9pt).
\def\smallnominalsize{9pt}
@@ -2771,11 +2799,6 @@ end
%
\def\dmn#1{\thinspace #1}
-% @l was never documented to mean ``switch to the Lisp font'',
-% and it is not used as such in any manual I can find. We need it for
-% Polish suppressed-l. --karl, 22sep96.
-%\def\l#1{{\li #1}\null}
-
% @acronym for "FBI", "NATO", and the like.
% We print this one point size smaller, since it's intended for
% all-uppercase.
@@ -2879,9 +2902,6 @@ end
\def\sup{\ifmmode \expandafter\ptexsp \else \expandafter\finishsup\fi}
\def\finishsup#1{$\ptexsp{\hbox{\selectfonts\lllsize #1}}$}%
-% ctrl is no longer a Texinfo command, but leave this definition for fun.
-\def\ctrl #1{{\tt \rawbackslash \hat}#1}
-
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
@@ -3195,8 +3215,15 @@ end
\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E}
\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e}
%
-% Use the ec* fonts (cm-super in outline format) for non-CM glyphs.
-\def\ecfont{%
+% Use the European Computer Modern fonts (cm-super in outline format)
+% for non-CM glyphs. That is ec* for regular text and tc* for the text
+% companion symbols (LaTeX TS1 encoding). Both are part of the ec
+% package and follow the same conventions.
+%
+\def\ecfont{\etcfont{e}}
+\def\tcfont{\etcfont{t}}
+%
+\def\etcfont#1{%
% We can't distinguish serif/sans and italic/slanted, but this
% is used for crude hacks anyway (like adding French and German
% quotes to documents typeset with CM, where we lose kerning), so
@@ -3205,14 +3232,14 @@ end
\edef\nominalsize{\csname\curfontsize nominalsize\endcsname}%
\ifmonospace
% typewriter:
- \font\thisecfont = ectt\ecsize \space at \nominalsize
+ \font\thisecfont = #1ctt\ecsize \space at \nominalsize
\else
\ifx\curfontstyle\bfstylename
% bold:
- \font\thisecfont = ecb\ifusingit{i}{x}\ecsize \space at \nominalsize
+ \font\thisecfont = #1cb\ifusingit{i}{x}\ecsize \space at \nominalsize
\else
% regular:
- \font\thisecfont = ec\ifusingit{ti}{rm}\ecsize \space at \nominalsize
+ \font\thisecfont = #1c\ifusingit{ti}{rm}\ecsize \space at \nominalsize
\fi
\fi
\thisecfont
@@ -3382,7 +3409,7 @@ end
\newtoks\evenfootline % footline on even pages
\newtoks\oddfootline % footline on odd pages
-% Now make TeX use those variables
+% Now make \makeheadline and \makefootline in Plain TeX use those variables
\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline
\else \the\evenheadline \fi}}
\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline
@@ -3438,6 +3465,10 @@ end
% @everyheadingmarks
% @everyfootingmarks
+% These define \getoddheadingmarks, \getevenheadingmarks,
+% \getoddfootingmarks, and \getevenfootingmarks, each to one of
+% \gettopheadingmarks, \getbottomheadingmarks.
+%
\def\evenheadingmarks{\headingmarks{even}{heading}}
\def\oddheadingmarks{\headingmarks{odd}{heading}}
\def\evenfootingmarks{\headingmarks{even}{footing}}
@@ -3727,7 +3758,12 @@ end
\noindent
\hbox to 0pt{\hss \itemcontents \kern\itemmargin}%
%
- \vadjust{\penalty 1200}}% not good to break after first line of item.
+ \ifinner\else
+ \vadjust{\penalty 1200}% not good to break after first line of item.
+ \fi
+ % We can be in inner vertical mode in a footnote, although an
+ % @itemize looks awful there.
+ }%
\flushcr
}
@@ -4349,19 +4385,16 @@ end
% except not \outer, so it can be used within macros and \if's.
\edef\newwrite{\makecsname{ptexnewwrite}}
-% \newindex {foo} defines an index named foo.
-% It automatically defines \fooindex such that
-% \fooindex ...rest of line... puts an entry in the index foo.
-% It also defines \fooindfile to be the number of the output channel for
-% the file that accumulates this index. The file's extension is foo.
+% \newindex {foo} defines an index named IX.
+% It automatically defines \IXindex such that
+% \IXindex ...rest of line... puts an entry in the index IX.
+% It also defines \IXindfile to be the number of the output channel for
+% the file that accumulates this index. The file's extension is IX.
% The name of an index should be no more than 2 characters long
% for the sake of vms.
%
\def\newindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
- \fi
+ \expandafter\chardef\csname#1indfile\endcsname=0
\expandafter\xdef\csname#1index\endcsname{% % Define @#1index
\noexpand\doindex{#1}}
}
@@ -4375,14 +4408,19 @@ end
\def\defcodeindex{\parsearg\newcodeindex}
%
\def\newcodeindex#1{%
- \iflinks
- \expandafter\newwrite \csname#1indfile\endcsname
- \openout \csname#1indfile\endcsname \jobname.#1
- \fi
+ \expandafter\chardef\csname#1indfile\endcsname=0
\expandafter\xdef\csname#1index\endcsname{%
\noexpand\docodeindex{#1}}%
}
+% The default indices:
+\newindex{cp}% concepts,
+\newcodeindex{fn}% functions,
+\newcodeindex{vr}% variables,
+\newcodeindex{tp}% types,
+\newcodeindex{ky}% keys
+\newcodeindex{pg}% and programs.
+
% @synindex foo bar makes index foo feed into index bar.
% Do this instead of @defindex foo if you don't want it as a separate index.
@@ -4411,26 +4449,19 @@ end
\expandafter\xdef\csname#2index\endcsname{\noexpand#1{#3}}%
}
-% Define \doindex, the driver for all \fooindex macros.
+% Define \doindex, the driver for all index macros.
% Argument #1 is generated by the calling \fooindex macro,
-% and it is "foo", the name of the index.
+% and it the two-letter name of the index.
-% \doindex just uses \parsearg; it calls \doind for the actual work.
-% This is because \doind is more useful to call from other macros.
-
-% There is also \dosubind {index}{topic}{subtopic}
-% which makes an entry in a two-level index such as the operation index.
-
-\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer}
-\def\singleindexer #1{\doind{\indexname}{#1}}
+\def\doindex#1{\edef\indexname{#1}\parsearg\doindexxxx}
+\def\doindexxxx #1{\doind{\indexname}{#1}}
% like the previous two, but they put @code around the argument.
-\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer}
-\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
+\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
+\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
-% Take care of Texinfo commands that can appear in an index entry.
-% Since there are some commands we want to expand, and others we don't,
-% we have to laboriously prevent expansion for those that we don't.
+% Used when writing an index entry out to an index file, to prevent
+% expansion of Texinfo commands that can appear in an index entry.
%
\def\indexdummies{%
\escapechar = `\\ % use backslash in output files.
@@ -4446,31 +4477,6 @@ end
\def\{{{\tt\char123}}%
\def\}{{\tt\char125}}%
%
- % I don't entirely understand this, but when an index entry is
- % generated from a macro call, the \endinput which \scanmacro inserts
- % causes processing to be prematurely terminated. This is,
- % apparently, because \indexsorttmp is fully expanded, and \endinput
- % is an expandable command. The redefinition below makes \endinput
- % disappear altogether for that purpose -- although logging shows that
- % processing continues to some further point. On the other hand, it
- % seems \endinput does not hurt in the printed index arg, since that
- % is still getting written without apparent harm.
- %
- % Sample source (mac-idx3.tex, reported by Graham Percival to
- % help-texinfo, 22may06):
- % @macro funindex {WORD}
- % @findex xyz
- % @end macro
- % ...
- % @funindex commtest
- % This is not enough to reproduce the bug, but it gives the flavor.
- %
- % Sample whatsit resulting:
- % address@hidden@folio address@hidden address@hidden }}}
- %
- % So:
- \let\endinput = \empty
- %
% Do the redefinitions.
\commondummies
}
@@ -4677,11 +4683,39 @@ end
% that we make for arg2 (see \parsemargdef ff.). We want all this to be
% expanded for the sake of the index, so we end up just seeing "bar".
\let\xeatspaces = \eatspaces
+ \let\xprocessmacroarg\eatspaces
}
% For testing: output @{ and @} in index sort strings as \{ and \}.
\newif\ifusebracesinindexes
+\let\indexlbrace\relax
+\let\indexrbrace\relax
+
address@hidden
+\catcode`\\=13
+ @address@hidden@def\{}}
+}
+
+{
+\catcode`\<=13
+\catcode`\-=13
+ \gdef\indexnonalnumdisappear{%
+ \backslashdisappear
+ \def-{}%
+ \def<{}%
+ address@hidden
+ }
+
+ \gdef\indexnonalnumreappear{%
+ \useindexbackslash
+ \let-\normaldash
+ \let<\normalless
+ address@hidden@}%
+ }
+}
+
+
% \indexnofonts is used when outputting the strings to sort the index
% by, and when constructing control sequence names. It eliminates all
% control sequences and just writes whatever the best ASCII sort string
@@ -4707,16 +4741,10 @@ end
\def\_{\normalunderscore}%
\def\-{}% @- shouldn't affect sorting
%
- % Unfortunately, texindex is not prepared to handle braces in the
- % content at all. So for index sorting, we map @{ and @} to strings
- % starting with |, since that ASCII character is between ASCII { and }.
- \ifusebracesinindexes
- \def\lbracechar{\lbracecmd}%
- \def\rbracechar{\rbracecmd}%
- \else
- \def\lbracechar{|a}%
- \def\rbracechar{|b}%
- \fi
+ % Unfortunately, texindex < 6.0 is not prepared to handle braces in the
+ % content at all, so these won't be sorted in ASCII order.
+ \def\lbracechar{{\indexlbrace}}%
+ \def\rbracechar{{\indexrbrace}}%
\let\{=\lbracechar
\let\}=\rbracechar
%
@@ -4728,7 +4756,7 @@ end
\def\L{L}%
\def\OE{OE}%
\def\O{O}%
- \def\TH{ZZZ}%
+ \def\TH{TH}%
\def\aa{aa}%
\def\ae{ae}%
\def\dh{dzz}%
@@ -4740,7 +4768,7 @@ end
\def\o{o}%
\def\questiondown{?}%
\def\ss{ss}%
- \def\th{zzz}%
+ \def\th{th}%
%
\def\LaTeX{LaTeX}%
\def\TeX{TeX}%
@@ -4798,14 +4826,17 @@ end
{\catcode`\`=\active
\gdef\indexlquoteignore{\let`=\empty}}
-\let\indexbackslash=0 %overridden during \printindex.
\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
% Most index entries go through here, but \dosubind is the general case.
% #1 is the index name, #2 is the entry text.
\def\doind#1#2{\dosubind{#1}{#2}{}}
-% Workhorse for all \fooindexes.
+% There is also \dosubind {index}{topic}{subtopic}
+% which makes an entry in a two-level index such as the operation index.
+% TODO: Two-level index? Operation index?
+
+% Workhorse for all indexes.
% #1 is name of index, #2 is stuff to put there, #3 is subentry --
% empty if called from \doind, as we usually are (the main exception
% is with most defuns, which call us directly).
@@ -4813,6 +4844,7 @@ end
\def\dosubind#1#2#3{%
\iflinks
{%
+ \requireopenindexfile{#1}%
% Store the main index entry text (including the third arg).
\toks0 = {#2}%
% If third arg is present, precede it with a space.
@@ -4828,7 +4860,49 @@ end
\fi
}
-% Write the entry in \toks0 to the index file:
+% Check if an index file has been opened, and if not, open it.
+\def\requireopenindexfile#1{%
+\ifnum\csname #1indfile\endcsname=0
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \edef\suffix{#1}%
+ % A .fls suffix would conflict with the file extension for the output
+ % of -recorder, so use .f1s instead.
+ \ifx\suffix\indexisfl\def\suffix{f1}\fi
+ % Open the file
+ \immediate\openout\csname#1indfile\endcsname \jobname.\suffix
+ % Using \immediate here prevents an object entering into the current box,
+ % which could confound checks such as those in \safewhatsit for preceding
+ % skips.
+\fi}
+\def\indexisfl{fl}
+
+% Output \ as {\indexbackslash}, because \ is an escape character in
+% the index files.
+\let\indexbackslash=\relax
address@hidden \catcode`\\=\active
+ @address@hidden@address@hidden
+}
+
+% Definition for writing index entry text.
+\def\sortas#1{\ignorespaces}%
+
+% Definition for writing index entry sort key. Should occur at the at
+% the beginning of the index entry, like
+% @cindex @sortas{september} \september
+% The \ignorespaces takes care of following space, but there's no way
+% to remove space before it.
+{
+\catcode`\-=13
+\gdef\indexwritesortas{%
+ \begingroup
+ \indexnonalnumreappear
+ \indexwritesortasxxx}
+\gdef\indexwritesortasxxx#1{%
+ \xdef\indexsortkey{#1}\endgroup}
+}
+
+
+% Write the entry in \toks0 to the index file.
%
\def\dosubindwrite{%
% Put the index entry in the margin if desired.
@@ -4838,14 +4912,20 @@ end
%
% Remember, we are within a group.
\indexdummies % Must do this here, since \bf, etc expand at this stage
- \def\backslashcurfont{\indexbackslash}% \indexbackslash isn't defined now
- % so it will be output as is; and it will print as backslash.
- %
- % Process the index entry with all font commands turned off, to
- % get the string to sort by.
+ \useindexbackslash % \indexbackslash isn't defined now so it will be output
+ % as is; and it will print as backslash.
+ % Get the string to sort by, by processing the index entry with all
+ % font commands turned off.
{\indexnofonts
- \edef\temp{\the\toks0}% need full expansion
- \xdef\indexsorttmp{\temp}%
+ \xdef\indexsortkey{}%
+ \let\sortas=\indexwritesortas
+ \indexnonalnumdisappear
+ \edef\temp{\the\toks0}%
+ \setbox\dummybox = \hbox{\temp}% Make sure to execute any \sortas
+ \ifx\indexsortkey\empty
+ \xdef\indexsortkey{\temp}%
+ \ifx\indexsortkey\empty\xdef\indexsortkey{ }\fi
+ \fi
}%
%
% Set up the complete index entry, with both the sort key and
@@ -4855,10 +4935,11 @@ end
% sorted result.
\edef\temp{%
\write\writeto{%
- \string\entry{\indexsorttmp}{\noexpand\folio}{\the\toks0}}%
+ \string\entry{\indexsortkey}{\noexpand\folio}{\the\toks0}}%
}%
\temp
}
+\newbox\dummybox % used above
% Take care of unwanted page breaks/skips around a whatsit:
%
@@ -4984,7 +5065,9 @@ end
% as its first line, TeX doesn't complain about mismatched braces
% (because it thinks @} is a control sequence).
\catcode`\@ = 11
- \openin 1 \jobname.#1s
+ % See comment in \requireopenindexfile.
+ \def\indexname{#1}\ifx\indexname\indexisfl\def\indexname{f1}\fi
+ \openin 1 \jobname.\indexname s
\ifeof 1
% \enddoublecolumns gets confused if there is no text in the index,
% and it loses the chapter title and the aux file entries for the
@@ -4992,43 +5075,96 @@ end
% there is some text.
\putwordIndexNonexistent
\else
+ \catcode`\\ = 0
+ \escapechar = `\\
%
% If the index file exists but is empty, then \openin leaves \ifeof
% false. We have to make TeX try to read something from the file, so
% it can discover if there is anything in it.
- \read 1 to \temp
+ \read 1 to \thisline
\ifeof 1
\putwordIndexIsEmpty
\else
% Index files are almost Texinfo source, but we use \ as the escape
% character. It would be better to use @, but that's too big a change
% to make right now.
- \def\indexbackslash{\backslashcurfont}%
- \catcode`\\ = 0
- \escapechar = `\\
+ \def\indexbackslash{\ttbackslash}%
+ \let\indexlbrace\{ % Likewise, set these sequences for braces
+ \let\indexrbrace\} % used in the sort key.
\begindoublecolumns
- \input \jobname.#1s
+ \let\entryorphanpenalty=\indexorphanpenalty
+ %
+ % Read input from the index file line by line.
+ \loopdo
+ \ifeof1
+ \let\firsttoken\relax
+ \else
+ \read 1 to \nextline
+ \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
+ \act
+ \fi
+ \thisline
+ %
+ \ifeof1\else
+ \let\thisline\nextline
+ \repeat
+ %%
\enddoublecolumns
\fi
\fi
\closein 1
\endgroup}
+\def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken}
+\long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1}
+
+\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
+\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
+
% These macros are used by the sorted index file itself.
% Change them to control the appearance of the index.
-\def\initial#1{{%
- % Some minor font changes for the special characters.
- \let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt
- %
+{\catcode`\/=13 \catcode`\-=13 \catcode`\^=13 \catcode`\~=13 \catcode`\_=13
+\catcode`\|=13 \catcode`\<=13 \catcode`\>=13 \catcode`\+=13 \catcode`\"=13
+\catcode`\$=3
+\gdef\initialglyphs{%
+ % Some changes for non-alphabetic characters. Using the glyphs from the
+ % math fonts looks more consistent than the typewriter font used elsewhere
+ % for these characters.
+ \def\indexbackslash{\math{\backslash}}%
+ \let\\=\indexbackslash
+ %
+ % Can't get bold backslash so don't use bold forward slash
+ \catcode`\/=13
+ \def/{{\secrmnotbold \normalslash}}%
+ \def-{{\normaldash\normaldash}}% en dash `--'
+ \def^{{\chapbf \normalcaret}}%
+ \def~{{\chapbf \normaltilde}}%
+ \def\_{%
+ \leavevmode \kern.07em \vbox{\hrule width.3em height.1ex}\kern .07em }%
+ \def|{$\vert$}%
+ \def<{$\less$}%
+ \def>{$\gtr$}%
+ \def+{$\normalplus$}%
+}}
+
+\def\initial{%
+ \bgroup
+ \initialglyphs
+ \initialx
+}
+
+\def\initialx#1{%
% Remove any glue we may have, we'll be inserting our own.
\removelastskip
%
% We like breaks before the index initials, so insert a bonus.
+ % The glue before the bonus allows a little bit of space at the
+ % bottom of a column to reduce an increase in inter-line spacing.
\nobreak
- \vskip 0pt plus 3\baselineskip
- \penalty 0
- \vskip 0pt plus -3\baselineskip
+ \vskip 0pt plus 5\baselineskip
+ \penalty -300
+ \vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
% baselineskips increases the chance of the dots lining up from column
@@ -5036,24 +5172,24 @@ end
% we need before each entry, but it's better.
%
% No shrink because it confuses \balancecolumns.
- \vskip 1.67\baselineskip plus .5\baselineskip
- \leftline{\secbf #1}%
+ \vskip 1.67\baselineskip plus 1\baselineskip
+ \leftline{\secfonts \kern-0.05em \secbf #1}%
+ % \secfonts is inside the argument of \leftline so that the change of
+ % \baselineskip will not affect any glue inserted before the vbox that
+ % \leftline creates.
% Do our best not to break after the initial.
\nobreak
\vskip .33\baselineskip plus .1\baselineskip
-}}
+ \egroup % \initialglyphs
+}
+
+\newdimen\entryrightmargin
+\entryrightmargin=0pt
% \entry typesets a paragraph consisting of the text (#1), dot leaders, and
% then page number (#2) flushed to the right margin. It is used for index
% and table of contents entries. The paragraph is indented by \leftskip.
%
-% A straightforward implementation would start like this:
-% \def\entry#1#2{...
-% But this freezes the catcodes in the argument, and can cause problems to
-% @code, which sets - active. This problem was fixed by a kludge---
-% ``-'' was active throughout whole index, but this isn't really right.
-% The right solution is to prevent \entry from swallowing the whole text.
-% --kasal, 21nov03
\def\entry{%
\begingroup
%
@@ -5061,38 +5197,46 @@ end
% affect previous text.
\par
%
- % Do not fill out the last line with white space.
- \parfillskip = 0in
- %
% No extra space above this paragraph.
\parskip = 0in
%
+ % When reading the text of entry, convert explicit line breaks
+ % from @* into spaces. The user might give these in long section
+ % titles, for instance.
+ \def\*{\unskip\space\ignorespaces}%
+ \def\entrybreak{\hfil\break}%
+ %
+ % A bit of stretch before each entry for the benefit of balancing
+ % columns.
+ \vskip 0pt plus0.5pt
+ %
+ % Badness calculation for paragraph affected by -
+ % How much \indexdotfill is stretched, or how much \parfillskip is shrunk
+ % Number of lines (\linepenalty)
+ %
% Do not prefer a separate line ending with a hyphen to fewer lines.
\finalhyphendemerits = 0
%
- % \hangindent is only relevant when the entry text and page number
- % don't both fit on one line. In that case, bob suggests starting the
- % dots pretty far over on the line. Unfortunately, a large
- % indentation looks wrong when the entry text itself is broken across
- % lines. So we use a small indentation and put up with long leaders.
- %
- % \hangafter is reset to 1 (which is the value we want) at the start
- % of each paragraph, so we need not do anything with that.
- \hangindent = 2em
+ % Word spacing - no stretch
+ \spaceskip=\fontdimen2\font minus \fontdimen4\font
%
- % When the entry text needs to be broken, just fill out the first line
- % with blank space.
- \rightskip = 0pt plus1fil
+ \linepenalty=1000 % Discourage line breaks.
+ \hyphenpenalty=5000 % Discourage hyphenation.
%
- % A bit of stretch before each entry for the benefit of balancing
- % columns.
- \vskip 0pt plus1pt
+ % Ragged right margin, but not for the last line with the leaders in it.
+ % When an index entry spans lines, this stretch competes with the stretch
+ % in \indexdotfill to determine how the line will be split.
+ \rightskip=\entryrightmargin
+ \advance\rightskip by 0pt plus .6\hsize
%
- % When reading the text of entry, convert explicit line breaks
- % from @* into spaces. The user might give these in long section
- % titles, for instance.
- \def\*{\unskip\space\ignorespaces}%
- \def\entrybreak{\hfil\break}%
+ % \parfillskip is at the end of the line with the page number
+ \parfillskip=0pt
+ % Cancel the \rightskip stretch
+ \advance \parfillskip by 0pt plus -.6\hsize
+ % Determine how far we can stretch into the margin.
+ % This allows, e.g., "Appendix H GNU Free Documentation License" to fit
+ % on one line.
+ \advance \parfillskip by 0pt minus .6\entryrightmargin
%
% Swallow the left brace of the text (first parameter):
\afterassignment\doentry
@@ -5100,6 +5244,8 @@ end
}
\def\entrybreak{\unskip\space\ignorespaces}%
\def\doentry{%
+ % Save the text of the entry in a \vtop.
+ \global\setbox\entryindexbox=\vtop\bgroup
\bgroup % Instead of the swallowed brace.
\noindent
\aftergroup\finishentry
@@ -5116,29 +5262,70 @@ end
\ %
\else
%
- % If we must, put the page number on a line of its own, and fill out
- % this line with blank space. (The \hfil is overwhelmed with the
- % fill leaders glue in \indexdotfill if the page number does fit.)
- \hfil\penalty50
\null\nobreak\indexdotfill % Have leaders before the page number.
%
- % The `\ ' here is removed by the implicit \unskip that TeX does as
- % part of (the primitive) \par. Without it, a spurious underfull
- % \hbox ensues.
\ifpdf
- \pdfgettoks#1.%
- \ \the\toksA
+ \pdfgettoks#1.%
+ \hskip\skip\thinshrinkable\the\toksA
\else
- \ #1%
+ \hskip\skip\thinshrinkable #1%
\fi
\fi
+ % Parameters for formatting this paragraph, reset for each paragraph.
+ %
+ % \hangindent is only relevant when the entry text and page number
+ % don't both fit on one line. In that case, bob suggests starting the
+ % dots pretty far over on the line. Unfortunately, a large
+ % indentation looks wrong when the entry text itself is broken across
+ % lines. So we use a small indentation and put up with long leaders.
+ %
+ \hangafter = 1
+ \hangindent = 1em
\par
+ \egroup % The \vtop
\endgroup
+ % delay text of entry until after penalty
+ \bgroup\aftergroup\insertindexentrybox
+ \entryorphanpenalty
+}
+
+\newskip\thinshrinkable
+\skip\thinshrinkable=.15em minus .15em
+
+\newbox\entryindexbox
+\def\insertindexentrybox{%
+\lineskip=.8ex plus .6ex % This comes into effect when the \vtop has a large
+ % depth due to the paragraph in it having several
+ % lines.
+\box\entryindexbox}
+
+% Default is no penalty
+\let\entryorphanpenalty\egroup
+
+% Used from \printindex. \firsttoken should be the first token
+% after the \entry. If it's not another \entry, we are at the last
+% line of a group of index entries, so insert a penalty to discourage
+% orphaned index entries.
+\long\def\indexorphanpenalty{%
+ \def\isentry{\entry}%
+ \ifx\firsttoken\isentry
+ \else
+ \unskip\penalty 9000
+ % The \unskip here stops breaking before the glue. It relies on the
+ % \vskip above being there, otherwise there is an error
+ % "You can't use `\unskip' in vertical mode". There has to be glue
+ % in the current vertical list that hasn't been added to the
+ % "current page". See Chapter 24 of the TeXbook. This contradicts
+ % Section 8.3.7 in "TeX by Topic," though.
+ \fi
+ \egroup % now comes the box added with \aftergroup
}
% Like plain.tex's \dotfill, except uses up at least 1 em.
+% Using a finite stretch encourages several words to appear on a second line
+% if the entry is broken.
\def\indexdotfill{\cleaders
- \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus 1fill}
+ \hbox{$\mathsurround=0pt \mkern1.5mu.\mkern1.5mu$}\hskip 1em plus .4\hsize}
\def\primary #1{\line{#1\hfil}}
@@ -5165,6 +5352,9 @@ end
\newbox\partialpage
\newdimen\doublecolumnhsize
+\newtoks\savedtopmark % Used in \begindoublecolumns
+\newtoks\savedfirstmark
+
\def\begindoublecolumns{\begingroup % ended by \enddoublecolumns
% Grab any single-column material above us.
\output = {%
@@ -5185,9 +5375,23 @@ end
\unvbox\PAGE
\kern-\topskip \kern\baselineskip
}%
+ % Save \topmark and \firstmark
+ \global\savedtopmark=\expandafter{\topmark}%
+ \global\savedfirstmark=\expandafter{\firstmark}%
}%
\eject % run that output routine to set \partialpage
%
+ % We recover the two marks that the last output routine saved in order
+ % to propagate the information in marks added around a chapter heading,
+ % which could be otherwise be lost by the time the final page is output.
+ %
+ \mark{\the\savedtopmark}% Only mark in page passed to following \output.
+ \output = {%
+ \setbox0=\box\PAGE % clear box 255
+ }abc\eject
+ %
+ \mark{\the\savedfirstmark}%
+ %
% Use the double-column output routine for subsequent pages.
\output = {\doublecolumnout}%
%
@@ -5218,7 +5422,7 @@ end
}
% The double-column output routine for all double-column pages except
-% the last.
+% the last, which is done by \balancecolumns.
%
\def\doublecolumnout{%
\splittopskip=\topskip \splitmaxdepth=\maxdepth
@@ -5300,28 +5504,47 @@ end
\pagegoal = \vsize
}
%
-% Called at the end of the double column material.
+% Only called for the last of the double column material. \doublecolumnout
+% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
\dimen@ = \ht0
\advance\dimen@ by \topskip
\advance\dimen@ by-\baselineskip
- \divide\dimen@ by 2 % target to split to
- %debug\message{final 2-column material height=\the\ht0, address@hidden
- \splittopskip = \topskip
- % Loop until we get a decent breakpoint.
- {%
- \vbadness = 10000
- \loop
- \global\setbox3 = \copy0
- \global\setbox1 = \vsplit3 to \dimen@
- \ifdim\ht3>\dimen@
- \global\advance\dimen@ by 1pt
- \repeat
- }%
- %debug\message{split to \the\dimen@, column heights: \the\ht1, \the\ht3.}%
- \setbox0=\vbox address@hidden
- \setbox2=\vbox address@hidden
+ \ifdim\dimen@<14\baselineskip
+ % Don't split a short final column in two.
+ \setbox2=\vbox{}%
+ \else
+ \divide\dimen@ by 2 % target to split to
+ address@hidden = \dimen@
+ \splittopskip = \topskip
+ % Loop until the second column is no higher than the first
+ {%
+ \vbadness = 10000
+ \loop
+ \global\setbox3 = \copy0
+ \global\setbox1 = \vsplit3 to \dimen@
+ % Remove glue from bottom of first column to
+ % make sure it is higher than the second.
+ \global\setbox1 = \vbox{\unvbox1\unpenalty\unskip}%
+ \ifdim\ht3>\ht1
+ \global\advance\dimen@ by 1pt
+ \repeat
+ }%
+ address@hidden by 4
+ address@hidden by 5
+ \ifdim\ht3<address@hidden
+ % Column heights are too different, so don't make their bottoms
+ % flush with each other. The glue at the end of the second column
+ % allows a second column to stretch, reducing the difference in
+ % height between the two.
+ \setbox0=\vbox address@hidden
+ \setbox2=\vbox address@hidden 0pt plus 0.3\ht0}%
+ \else
+ \setbox0=\vbox address@hidden
+ \setbox2=\vbox address@hidden
+ \fi
+ \fi
%
\pagesofar
}
@@ -5342,6 +5565,9 @@ end
\let\lastnode=\empty % no node to associate with
\writetocentry{part}{#1}{}% but put it in the toc
\headingsoff % no headline or footline on the part page
+ % This outputs a mark at the end of the page that clears \thischapter
+ % and \thissection, like is done in \startcontents.
+ \chapmacro{}{Yomitfromtoc}{}%
\chapoddpage
\endgroup
}
@@ -5586,9 +5812,6 @@ end
% @centerchap is like @unnumbered, but the heading is centered.
\outer\parseargdef\centerchap{%
- % Well, we could do the following in a group, but that would break
- % an assumption that \chapmacro is called at the outermost level.
- % Thus we are safer this way: --kasal, 24feb04
\let\centerparametersmaybe = \centerparameters
\unnmhead0{#1}%
\let\centerparametersmaybe = \relax
@@ -5712,7 +5935,11 @@ end
% Define plain chapter starts, and page on/off switching for it.
\def\chapbreak{\dobreak \chapheadingskip {-4000}}
+
+% Start a new page
\def\chappager{\par\vfill\supereject}
+
+% \chapoddpage - start on an odd page for a new chapter
% Because \domark is called before \chapoddpage, the filler page will
% get the headings for the next chapter, which is wrong. But we don't
% care -- we just disable all headings on the filler page.
@@ -5748,7 +5975,7 @@ end
\CHAPPAGon
-% Chapter opening.
+% \chapmacro - Chapter opening.
%
% #1 is the text, #2 is the section type (Ynumbered, Ynothing,
% Yappendix, Yomitfromtoc), #3 the chapter number.
@@ -6142,7 +6369,7 @@ end
\savepageno = \pageno
\begingroup % Set up to handle contents files properly.
\raggedbottom % Worry more about breakpoints than the bottom.
- \advance\hsize by -\contentsrightmargin % Don't use the full line length.
+ \entryrightmargin=\contentsrightmargin % Don't use the full line length.
%
% Roman numerals for page numbers.
\ifnum \pageno>0 \global\pageno = \lastnegativepageno \fi
@@ -6247,7 +6474,7 @@ end
% Chapters, in the main contents.
\def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}}
-%
+
% Chapters, in the short toc.
% See comments in \dochapentry re vbox and related settings.
\def\shortchapentry#1#2#3#4{%
@@ -6262,7 +6489,7 @@ end
\setbox0 = \hbox{\putwordAppendix{} M}%
\hbox to \wd0{\putwordAppendix{} #1\hss}}
%
-\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\labelspace#1}{#4}}
+\def\appentry#1#2#3#4{\dochapentry{\appendixbox{#2}\hskip.7em#1}{#4}}
% Unnumbered chapters.
\def\unnchapentry#1#2#3#4{\dochapentry{#1}{#4}}
@@ -6295,6 +6522,8 @@ end
\def\dochapentry#1#2{%
\penalty-300 \vskip1\baselineskip plus.33\baselineskip minus.25\baselineskip
\begingroup
+ % Move the page numbers slightly to the right
+ \advance\entryrightmargin by -0.05em
\chapentryfonts
\tocentry{#1}{\dopageno\bgroup#2\egroup}%
\endgroup
@@ -6414,6 +6643,24 @@ end
\endgraf
\ifdim\lastskip<\envskipamount
\removelastskip
+ \ifnum\lastpenalty<10000
+ % Penalize breaking before the environment, because preceding text
+ % often leads into it.
+ \penalty100
+ \fi
+ \vskip\envskipamount
+ \fi
+ \fi
+}}
+
+\def\afterenvbreak{{%
+ % =10000 instead of <10000 because of a special case in \itemzzz and
+ % \sectionheading, q.v.
+ \ifnum \lastpenalty=10000 \else
+ \advance\envskipamount by \parskip
+ \endgraf
+ \ifdim\lastskip<\envskipamount
+ \removelastskip
% it's not a good place to break if the last penalty was \nobreak
% or better ...
\ifnum\lastpenalty<10000 \penalty-50 \fi
@@ -6422,8 +6669,6 @@ end
\fi
}}
-\let\afterenvbreak = \aboveenvbreak
-
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins; it will
% also clear it, so that its embedded environments do the narrowing again.
\let\nonarrowing=\relax
@@ -6467,7 +6712,7 @@ end
% collide with the section heading.
\ifnum\lastpenalty>10000 \vskip\parskip \penalty\lastpenalty \fi
%
- \vbox\bgroup
+ \setbox\groupbox=\vbox\bgroup
\baselineskip=0pt\parskip=0pt\lineskip=0pt
\carttop
\hbox\bgroup
@@ -6491,6 +6736,7 @@ end
\egroup
\cartbot
\egroup
+ \addgroupbox
\checkinserts
}
@@ -6873,7 +7119,7 @@ end
% typesetting commands (@smallbook, font changes, etc.) have to be done
% beforehand -- and a) we want @copying to be done first in the source
% file; b) letting users define the frontmatter in as flexible order as
-% possible is very desirable.
+% possible is desirable.
%
\def\copying{\checkenv{}\begingroup\scanargctxt\docopying}
address@hidden copying{\endgroup\def\copyingtext{#1}}
@@ -6968,7 +7214,7 @@ end
\temp
}
-% \domakedefun \deffn \deffnx \deffnheader
+% \domakedefun \deffn \deffnx \deffnheader { (defn. of \deffnheader) }
%
% Define \deffn and \deffnx, without parameters.
% \deffnheader has to be defined explicitly.
@@ -7306,34 +7552,44 @@ end
}
\fi
-\def\scanmacro#1{\begingroup
+\let\aftermacroxxx\relax
+\def\aftermacro{\aftermacroxxx}
+
+% alias because \c means cedilla in @tex or @math
+\let\texinfoc=\c
+
+% Used at the time of macro expansion.
+% Argument is macro body with arguments substituted
+\def\scanmacro#1{%
\newlinechar`\^^M
\let\xeatspaces\eatspaces
+ % Reduce doubled backslashes to one
+ \def\xprocessmacroarg{\passargtomacro\eatspaces}%
%
- % Undo catcode changes of \startcontents and \doprintindex
- % When called from @insertcopying or (short)caption, we need active
- % backslash to get it printed correctly. Previously, we had
- % \catcode`\\=\other instead. We'll see whether a problem appears
- % with macro expansion. --kasal, 19aug04
- address@hidden \catcode`\\=\active \escapechar=`\@
- %
- % ... and for \example:
- \spaceisspace
+ % Process the macro body under the current catcode regime.
+ \scantokens{#1\texinfoc}\aftermacro%
%
- % The \empty here causes a following catcode 5 newline to be eaten as
- % part of reading whitespace after a control sequence. It does not
- % eat a catcode 13 newline. There's no good way to handle the two
- % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX
- % would then have different behavior). See the Macro Details node in
- % the manual for the workaround we recommend for macros and
- % line-oriented commands.
- %
- \scantokens{#1\empty}%
-\endgroup}
+ % The \c is to remove the \newlinechar added by \scantokens, and
+ % can be noticed by \parsearg.
+ % The \aftermacro allows a \comment at the end of the macro definition
+ % to duplicate itself past the final \newlinechar added by \scantokens:
+ % this is used in the definition of \group to comment out a newline. We
+ % don't do the same for \c to support Texinfo files with macros that ended
+ % with a @c, which should no longer be necessary.
+ % We avoid surrounding the call to \scantokens with \bgroup and \egroup
+ % to allow macros to open or close groups themselves.
+}
\def\scanexp#1{%
+ \bgroup
+ % Undo catcode changes of \startcontents and \printindex
+ % When called from @insertcopying or (short)caption, we need active
+ % backslash to get it printed correctly.
+ % FIXME: This may not be needed.
+ address@hidden \catcode`\\=\active \escapechar=`\@
\edef\temp{\noexpand\scanmacro{#1}}%
\temp
+ \egroup
}
\newcount\paramno % Count of parameters
@@ -7399,7 +7655,6 @@ end
\catcode`\+=\other
\catcode`\<=\other
\catcode`\>=\other
- address@hidden
\catcode`\^=\other
\catcode`\_=\other
\catcode`\|=\other
@@ -7409,37 +7664,35 @@ end
\def\scanargctxt{% used for copying and captions, not macros.
\scanctxt
+ address@hidden
\catcode`\\=\other
\catcode`\^^M=\other
}
\def\macrobodyctxt{% used for @macro definitions
\scanctxt
+ \catcode`\ =\other
+ address@hidden
\catcode`\{=\other
\catcode`\}=\other
\catcode`\^^M=\other
\usembodybackslash
}
-\def\macroargctxt{% used when scanning invocations
+% Used when scanning braced macro arguments. Note, however, that catcode
+% changes here are ineffectual if the macro invocation was nested inside
+% an argument to another Texinfo command.
+\def\macroargctxt{%
+ \scanctxt
+ \catcode`\^^M=\other
+ \catcode`\\=\active
+}
+
+\def\macrolineargctxt{% used for whole-line arguments without braces
\scanctxt
- \catcode`\\=0
+ \catcode`\{=\other
+ \catcode`\}=\other
}
-% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes"
-% for the single characters \ { }. Thus, we end up with the "commands"
-% that would be written @\ @{ @} in a Texinfo document.
-%
-% We already have @{ and @}. For @\, we define it here, and only for
-% this purpose, to produce a typewriter backslash (so, the @\ that we
-% define for @math can't be used with @macro calls):
-%
-\def\\{\normalbackslash}%
-%
-% We would like to do this for \, too, since that is what makeinfo does.
-% But it is not possible, because Texinfo already has a command @, for a
-% cedilla accent. Documents must use @comma{} instead.
-%
-% \anythingelse will almost certainly be an error of some kind.
% \mbodybackslash is the definition of \ in @macro bodies.
% It maps \foo\ => \csname macarg.foo\endcsname => #N
@@ -7511,56 +7764,36 @@ end
\fi
}
-% This makes use of the obscure feature that if the last token of a
-% <parameter list> is #, then the preceding argument is delimited by
-% an opening brace, and that opening brace is not consumed.
+% \getargs -- Parse the arguments to a @macro line. Set \macname to
+% the name of the macro, and \argl to the braced argument list.
\def\getargs#1{\getargsxxx#1{}}
\def\getargsxxx#1#{\getmacname #1 \relax\getmacargs}
\def\getmacname#1 #2\relax{\macname={#1}}
\def\getmacargs#1{\def\argl{#1}}
+% This made use of the feature that if the last token of a
+% <parameter list> is #, then the preceding argument is delimited by
+% an opening brace, and that opening brace is not consumed.
-% For macro processing make @ a letter so that we can make Texinfo private
macro names.
address@hidden
-\catcode address@hidden
-
-% Parse the optional {params} list. Set up \paramno and \paramlist
-% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH
-% in the params list to some hook where the argument is to be expanded. If
-% there are less than 10 arguments that hook is to be replaced by ##N where N
+% Parse the optional {params} list to @macro or @rmacro.
+% Set \paramno to the number of arguments,
+% and \paramlist to a parameter text for the macro (e.g. #1,#2,#3 for a
+% three-param macro.) Define \macarg.BLAH for each BLAH in the params
+% list to some hook where the argument is to be expanded. If there are
+% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
-% We need to get `macro parameter char #' into several definitions.
-% The technique used is stolen from LaTeX: let \hash be something
-% unexpandable, insert that wherever you need a #, and then redefine
-% it to # just before using the token list produced.
+% If there are 10 or more arguments, a different technique is used: see
+% \parsemmanyargdef.
%
-% The same technique is used to protect \eatspaces till just before
-% the macro is used.
-%
-% If there are 10 or more arguments, a different technique is used, where the
-% hook remains in the body, and when macro is to be expanded the body is
-% processed again to replace the arguments.
-%
-% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
-% argument N value and then \edef the body (nothing else will expand because
of
-% the catcode regime underwhich the body was input).
-%
-% If you compile with TeX (not eTeX), and you have macros with 10 or more
-% arguments, no macro can have more than 256 arguments (else error).
\def\parsemargdef#1;{%
\paramno=0\def\paramlist{}%
\let\hash\relax
- \let\xeatspaces\relax
+ % \hash is redefined to `#' later to get it into definitions
+ \let\processmacroarg\relax
\parsemargdefxxx#1,;,%
- % In case that there are 10 or more arguments we parse again the arguments
- % list to set new definitions for the \macarg.BLAH macros corresponding to
- % each BLAH argument. It was anyhow needed to parse already once this list
- % in order to count the arguments, and as macros with at most 9 arguments
- % are by far more frequent than macro with 10 or more arguments, defining
- % twice the \macarg.BLAH macros does not cost too much processing power.
\ifnum\paramno<10\relax\else
\paramno0\relax
\parsemmanyargdef@@#1,;,% 10 or more arguments
@@ -7571,10 +7804,47 @@ end
\else \let\next=\parsemargdefxxx
\advance\paramno by 1
\expandafter\edef\csname macarg.\eatspaces{#1}\endcsname
- {\xeatspaces{\hash\the\paramno}}%
+ {\processmacroarg{\hash\the\paramno}}%
\edef\paramlist{\paramlist\hash\the\paramno,}%
\fi\next}
+% \parsemacbody, \parsermacbody
+%
+% Read recursive and nonrecursive macro bodies. (They're different since
+% rec and nonrec macros end differently.)
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+% body to be transformed.
+% Set \macrobody to the body of the macro, and call \defmacro.
+%
+{\catcode`\ address@hidden macro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+{\catcode`\ address@hidden rmacro{%
+\xdef\macrobody{\eatcr{#1}}\endgroup\defmacro}}%
+
+% Make @ a letter, so that we can make private-to-Texinfo macro names.
address@hidden
+\catcode address@hidden
+
+%%%%%%%%%%%%%% Code for > 10 arguments only %%%%%%%%%%%%%%%%%%
+
+% If there are 10 or more arguments, a different technique is used, where the
+% hook remains in the body, and when macro is to be expanded the body is
+% processed again to replace the arguments.
+%
+% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the
+% argument N value and then \edef the body (nothing else will expand because of
+% the catcode regime under which the body was input).
+%
+% If you compile with TeX (not eTeX), and you have macros with 10 or more
+% arguments, no macro can have more than 256 arguments (else error).
+%
+% In case that there are 10 or more arguments we parse again the arguments
+% list to set new definitions for the \macarg.BLAH macros corresponding to
+% each BLAH argument. It was anyhow needed to parse already once this list
+% in order to count the arguments, and as macros with at most 9 arguments
+% are by far more frequent than macro with 10 or more arguments, defining
+% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
\else
@@ -7590,16 +7860,6 @@ end
\advance\paramno by 1\relax
\fi\next}
-% These two commands read recursive and nonrecursive macro bodies.
-% (They're different since rec and nonrec macros end differently.)
-%
-
-\catcode address@hidden
address@hidden macro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
address@hidden rmacro%
-{\xdef\temp{\eatcr{#1}}\endgroup\defmacro}%
-\catcode address@hidden
address@hidden
address@hidden
@@ -7607,7 +7867,7 @@ end
address@hidden@}%
% This macro is expanded during the Texinfo macro expansion, not during its
-% definition. It gets all the arguments values and assigns them to macros
+% definition. It gets all the arguments' values and assigns them to macros
% macarg.ARGNAME
%
% #1 is the macro name
@@ -7628,8 +7888,6 @@ end
\getargvals@@
\fi
}
-
-%
\def\getargvals@@{%
\ifx\paramlist\nilm@
% Some sanity check needed here that \argvaluelist is also empty.
@@ -7673,7 +7931,8 @@ end
}
% Replace arguments by their values in the macro body, and place the result
-% in macro address@hidden
+% in macro address@hidden
+%
address@hidden
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -7697,8 +7956,9 @@ end
address@hidden@tempc}%
}
+% Define the named-macro outside of this group and then close this group.
+%
address@hidden
- %% Define the named-macro outside of this group and then close this group.
\expandafter
\endgroup
\macargdeflist@
@@ -7735,14 +7995,8 @@ end
\next
}
-% Save the token stack pointer into macro #1
address@hidden
-% Restore the token stack pointer from number in macro #1
address@hidden
-% newtoks that can be used non \outer .
-\def\texinonouternewtoks{\alloc@ 5\toks \toksdef address@hidden
-
-% Tailing missing arguments are set to empty
+% Trailing missing arguments are set to empty.
+%
address@hidden
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -7772,99 +8026,204 @@ end
\long\def#2{#4}%
}
-% This defines a Texinfo @macro. There are eight cases: recursive and
-% nonrecursive macros of zero, one, up to nine, and many arguments.
-% Much magic with \expandafter here.
+
+%%%%%%%%%%%%%% End of code for > 10 arguments %%%%%%%%%%%%%%%%%%
+
+
+
+% Remove following spaces at the expansion stage.
+% This works because spaces are discarded before each argument when TeX is
+% getting the arguments for a macro.
+% This must not be immediately followed by a }.
+\long\def\gobblespaces#1{#1}
+
+% This defines a Texinfo @macro or @rmacro, called by \parsemacbody.
+% \macrobody has the body of the macro in it, with placeholders for
+% its parameters, looking like "\processmacroarg{\hash 1}".
+% \paramno is the number of parameters
+% \paramlist is a TeX parameter text, e.g. "#1,#2,#3,"
+% There are eight cases: recursive and nonrecursive macros of zero, one,
+% up to nine, and many arguments.
% \xdef is used so that macro definitions will survive the file
-% they're defined in; @include reads the file inside a group.
+% they're defined in: @include reads the file inside a group.
%
\def\defmacro{%
\let\hash=##% convert placeholders to macro parameter chars
- \ifrecursive
+ \ifnum\paramno=1
+ \def\processmacroarg{\gobblespaces}%
+ % This removes the pair of braces around the argument. We don't
+ % use \eatspaces, because this can cause ends of lines to be lost
+ % when the argument to \eatspaces is read, leading to line-based
+ % commands like "@itemize" not being read correctly.
+ \else
+ \def\processmacroarg{\xprocessmacroarg}%
+ \let\xprocessmacroarg\relax
+ \fi
+ \ifrecursive %%%%%%%%%%%%%% Recursive %%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\ifcase\paramno
% 0
\expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\scanmacro{\temp}}%
+ \noexpand\scanmacro{\macrobody}}%
\or % 1
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
+ \bgroup
\noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
- \egroup\noexpand\scanmacro{\temp}}%
+ \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname @@@@\endcsname{%
+ \noexpand\gobblespaces##1\empty}%
+ % The \empty is for \gobblespaces in case #1 is empty
+ }%
+ \expandafter\xdef\csname\the\macname @@@@\endcsname##1{%
+ \egroup\noexpand\scanmacro{\macrobody}}%
\else
\ifnum\paramno<10\relax % at most 9
\expandafter\xdef\csname\the\macname\endcsname{%
\bgroup\noexpand\macroargctxt
- \noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \noexpand\csname\the\macname @@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname @@@\endcsname ##1,}%
\expandafter\expandafter
\expandafter\xdef
\expandafter\expandafter
- \csname\the\macname xxx\endcsname
- \paramlist{\egroup\noexpand\scanmacro{\temp}}%
+ \csname\the\macname @@@\endcsname
+ \paramlist{\egroup\noexpand\scanmacro{\macrobody}}%
\else % 10 or more
\expandafter\xdef\csname\the\macname\endcsname{%
address@hidden
}%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+ \global\expandafter\let\csname mac.\the\macname
.body\endcsname\macrobody
\global\expandafter\let\csname mac.\the\macname
.recurse\endcsname\gobble
\fi
\fi
- \else
+ \else %%%%%%%%%%%%%%%%%%%%%% Non-recursive %%%%%%%%%%%%%%%%%%%%%%%%%%
\ifcase\paramno
% 0
\expandafter\xdef\csname\the\macname\endcsname{%
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
+ \noexpand\scanmacro{\macrobody}}%
\or % 1
\expandafter\xdef\csname\the\macname\endcsname{%
- \bgroup\noexpand\macroargctxt
+ \bgroup
\noexpand\braceorline
- \expandafter\noexpand\csname\the\macname xxx\endcsname}%
- \expandafter\xdef\csname\the\macname xxx\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@@\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname @@@@\endcsname{%
+ \noexpand\gobblespaces##1\empty}%
+ % The \empty is for \gobblespaces in case #1 is empty
+ }%
+ \expandafter\xdef\csname\the\macname @@@@\endcsname##1{%
\egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
+ \noexpand\scanmacro{\macrobody}%
+ }%
\else % at most 9
\ifnum\paramno<10\relax
\expandafter\xdef\csname\the\macname\endcsname{%
\bgroup\noexpand\macroargctxt
- \expandafter\noexpand\csname\the\macname xx\endcsname}%
- \expandafter\xdef\csname\the\macname xx\endcsname##1{%
- \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\noexpand\csname\the\macname @@\endcsname}%
+ \expandafter\xdef\csname\the\macname @@\endcsname##1{%
+ \expandafter\noexpand\csname\the\macname @@@\endcsname ##1,}%
\expandafter\expandafter
\expandafter\xdef
\expandafter\expandafter
- \csname\the\macname xxx\endcsname
+ \csname\the\macname @@@\endcsname
\paramlist{%
\egroup
- \noexpand\norecurse{\the\macname}%
- \noexpand\scanmacro{\temp}\egroup}%
+ \noexpand\scanmacro{\macrobody}%
+ }%
\else % 10 or more:
\expandafter\xdef\csname\the\macname\endcsname{%
address@hidden
}%
- \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp
+ \global\expandafter\let\csname mac.\the\macname
.body\endcsname\macrobody
\global\expandafter\let\csname mac.\the\macname
.recurse\endcsname\norecurse
\fi
\fi
\fi}
-\catcode address@hidden
+\catcode address@hidden % end private-to-Texinfo catcodes
\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
-% \braceorline decides whether the next nonwhitespace character is a
-% {. If so it reads up to the closing }, if not, it reads the whole
-% line. Whatever was read is then fed to the next control sequence
-% as an argument (by \parsebrace or \parsearg).
+
address@hidden \catcode`\\=13
address@hidden@_=11
+
+% Call #1 with a list of tokens #2, with any doubled backslashes in #2
+% compressed to one.
address@hidden@passargtomacro#1#2{%
+ @address@hidden
+ @address@hidden
+ @address@hidden@finish}%
+ @address@hidden
+ @address@hidden@relax
+ @address@hidden
+}
+
+% Input stream is just after a backslash. If the next token is not a
+% backslash, process the rest of the argument; otherwise, remove the next
+% token.
address@hidden@look_ahead{%
+ @address@hidden@look_aheadzzz}
address@hidden@look_aheadzzz{%
+ @address@hidden
+ @address@hidden@gobble_and_check_finish
+ @else
+ @address@hidden@add_segment
+ @address@hidden
+}
+
+% Double backslash found. Add a single backslash here.
address@hidden@gobble_and_check_finish#1{%
+ @add_the_backslash
+ @address@hidden
+ @address@hidden@add_segment
+}
+
+% append a backslash to \arg_result
address@hidden@add_the_backslash{%
+ @address@hidden@address@hidden@address@hidden
+}
+
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% \next_token contains the first token in the input stream: if it is \finish,
+% finish; otherwise, append to \arg_result the segment of the argument up until
+% the next backslash. \pending_backslash contains a backslash to represent
+% a backslash just before the start of the input stream that has not been
+% added to \arg_result.
address@hidden@add_segment#1\{%
address@hidden@address@hidden
+ @address@hidden@call_the_macro%
address@hidden
+ @address@hidden@look_ahead
+ %
+ % append to @arg_result
+ % token list registers might be better
+ @address@hidden@address@hidden
+ @address@hidden@address@hidden
+ @address@hidden@expandafter{%
+ @address@hidden
+ @pending_backslash#1}%
+ @address@hidden
address@hidden@next}
+
address@hidden@address@hidden@address@hidden@arg_result}}
+
+}
+
+% \braceorline MAC is used for a one-argument macro MAC. It checks
+% whether the next non-whitespace character is a {. It sets the context
+% for reading the argument (slightly different in the two cases). Then,
+% to read the argument, in the whole-line case, it then calls the regular
+% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
- \ifx\nchar\bgroup\else
- \expandafter\parsearg
+ \ifx\nchar\bgroup
+ \macroargctxt
+ \expandafter\passargtomacro
+ \else
+ \macrolineargctxt\expandafter\parsearg
\fi \macnamexxx}
@@ -7946,6 +8305,7 @@ end
\pdfmkdest{#1}%
\iflinks
{%
+ \requireauxfile
\atdummies % preserve commands, but don't expand them
\edef\writexrdef##1##2{%
address@hidden #1 of \setref, expanded by the \edef
@@ -7985,9 +8345,12 @@ end
% node name, #4 the name of the Info file, #5 the name of the printed
% manual. All but the node name can be omitted.
%
-\def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]}
-\def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]}
-\def\ref#1{\xrefX[#1,,,,,,,]}
+\def\pxref{\putwordsee{} \xrefXX}
+\def\xref{\putwordSee{} \xrefXX}
+\def\ref{\xrefXX}
+
+\def\xrefXX#1{\def\xrefXXarg{#1}\futurelet\tokenafterxref\xrefXXX}
+\def\xrefXXX{\expandafter\xrefX\expandafter[\xrefXXarg,,,,,,,]}
%
\newbox\toprefbox
\newbox\printedrefnamebox
@@ -8131,6 +8494,12 @@ end
%
% output the `page 3'.
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
+ \ifx,\tokenafterxref
+ \else\ifx.\tokenafterxref
+ \else\ifx;\tokenafterxref
+ \else\ifx)\tokenafterxref
+ \else,% add a , if xref not followed by punctuation
+ \fi\fi\fi\fi
\fi\fi
\fi
\endlink
@@ -8201,6 +8570,7 @@ end
% If its value is nonempty, SUFFIX is output afterward.
%
\def\refx#1#2{%
+ \requireauxfile
{%
\indexnofonts
\otherbackslash
@@ -8264,6 +8634,23 @@ end
\fi
}
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate at the beginning of the file.
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
+% Used when writing to the aux file, or when using data from it.
+\def\requireauxfile{%
+ \iflinks
+ \tryauxfile
+ % Open the new aux file. TeX will close it automatically at exit.
+ \immediate\openout\auxfile=\jobname.aux
+ \fi
+ \global\let\requireauxfile=\relax % Only do this once.
+}
+
% Read the last existing aux file, if any. No error if none exists.
%
\def\tryauxfile{%
@@ -8737,6 +9124,7 @@ end
% \floatlabel-lof. Besides \floatident, we include the short
% caption if specified, else the full caption if specified, else nothing.
{%
+ \requireauxfile
\atdummies
%
% since we read the caption text in the macro world, where ^^M
@@ -8954,7 +9342,6 @@ directory should work if nowhere else does.}
\catcode\count255=#1\relax
\advance\count255 by 1
\repeat
-
}
% @documentencoding sets the definition of non-ASCII characters
@@ -9021,17 +9408,17 @@ directory should work if nowhere else does.}
\def\latonechardefs{%
\gdef^^a0{\tie}
\gdef^^a1{\exclamdown}
- \gdef^^a2{\missingcharmsg{CENT SIGN}}
- \gdef^^a3{{\pounds}}
- \gdef^^a4{\missingcharmsg{CURRENCY SIGN}}
- \gdef^^a5{\missingcharmsg{YEN SIGN}}
- \gdef^^a6{\missingcharmsg{BROKEN BAR}}
+ \gdef^^a2{{\tcfont \char162}} % cent
+ \gdef^^a3{\pounds}
+ \gdef^^a4{{\tcfont \char164}} % currency
+ \gdef^^a5{{\tcfont \char165}} % yen
+ \gdef^^a6{{\tcfont \char166}} % broken bar
\gdef^^a7{\S}
\gdef^^a8{\"{}}
\gdef^^a9{\copyright}
\gdef^^aa{\ordf}
\gdef^^ab{\guillemetleft}
- \gdef^^ac{$\lnot$}
+ \gdef^^ac{\ensuremath\lnot}
\gdef^^ad{\-}
\gdef^^ae{\registeredsymbol}
\gdef^^af{\={}}
@@ -9396,7 +9783,11 @@ directory should work if nowhere else does.}
\def\utfeightchardefs{%
\DeclareUnicodeCharacter{00A0}{\tie}
\DeclareUnicodeCharacter{00A1}{\exclamdown}
+ \DeclareUnicodeCharacter{00A2}{{\tcfont \char162}}% 0242=cent
\DeclareUnicodeCharacter{00A3}{\pounds}
+ \DeclareUnicodeCharacter{00A4}{{\tcfont \char164}}% 0244=currency
+ \DeclareUnicodeCharacter{00A5}{{\tcfont \char165}}% 0245=yen
+ \DeclareUnicodeCharacter{00A6}{{\tcfont \char166}}% 0246=brokenbar
\DeclareUnicodeCharacter{00A7}{\S}
\DeclareUnicodeCharacter{00A8}{\"{ }}
\DeclareUnicodeCharacter{00A9}{\copyright}
@@ -10159,8 +10550,8 @@ directory should work if nowhere else does.}
\def\activedoublequote{{\tt\char34}}
\let"=\activedoublequote
\catcode`\~=\active \def\activetilde{{\tt\char126}} \let~ = \activetilde
-\chardef\hat=`\^
-\catcode`\^=\active \def\activehat{{\tt \hat}} \let^ = \activehat
+\chardef\hatchar=`\^
+\catcode`\^=\active \def\activehat{{\tt \hatchar}} \let^ = \activehat
\catcode`\_=\active
\def_{\ifusingtt\normalunderscore\_}
@@ -10177,6 +10568,8 @@ directory should work if nowhere else does.}
\catcode`\>=\active \def\activegtr{{\tt \gtr}}\let> = \activegtr
\catcode`\+=\active \def+{{\tt \char 43}}
\catcode`\$=\active \def${\ifusingit{{\sl\$}}\normaldollar}%$ font-lock fix
+\catcode`\-=\active \let-=\normaldash
+
% used for headline/footline in the output routine, in case the page
% breaks in the middle of an @tex block.
@@ -10191,12 +10584,6 @@ directory should work if nowhere else does.}
% in principle, all other definitions in \tex have to be undone too.
}
-% If a .fmt file is being used, characters that might appear in a file
-% name cannot be active until we have parsed the command line.
-% So turn them off again, and have \everyjob (or @setfilename) turn them on.
-% \otherifyactive is called near the end of this file.
-\def\otherifyactive{\catcode`+=\other \catcode`\_=\other}
-
% Used sometimes to turn off (effectively) the active characters even after
% parsing them.
\def\turnoffactive{%
@@ -10215,23 +10602,22 @@ directory should work if nowhere else does.}
% \doublebackslash is two of them (for the pdf outlines).
{\catcode`\\=\other @address@hidden @address@hidden
-% In texinfo, backslash is an active character; it prints the backslash
+% In Texinfo, backslash is an active character; it prints the backslash
% in fixed width font.
\catcode`\\=\active % @ for escape char from now on.
-% The story here is that in math mode, the \char of \backslashcurfont
-% ends up printing the roman \ from the math symbol font (because \char
-% in math mode uses the \mathcode, and plain.tex sets
-% \mathcode`\\="026E). It seems better for @backslashchar{} to always
-% print a typewriter backslash, hence we use an explicit \mathchar,
+% Print a typewriter backslash. For math mode, we can't simply use
+% \backslashcurfont: the story here is that in math mode, the \char
+% of \backslashcurfont ends up printing the roman \ from the math symbol
+% font (because \char in math mode uses the \mathcode, and plain.tex
+% sets \mathcode`\\="026E). Hence we use an explicit \mathchar,
% which is the decimal equivalent of "715c (class 7, e.g., use \fam;
% ignored family value; char position "5C). We can't use " for the
% usual hex value because it has already been made active.
address@hidden@address@hidden @ifmmode @mathchar29020 @else @backslashcurfont
@fi}}
address@hidden@backslashchar = @normalbackslash % @backslashchar{} is for user
documents.
-% On startup, @fixbackslash assigns:
-% @let \ = @normalbackslash
address@hidden@address@hidden @ifmmode @mathchar29020 @else @backslashcurfont
@fi}}
address@hidden@backslashchar = @ttbackslash % @backslashchar{} is for user
documents.
+
% \rawbackslash defines an active \ to do \backslashcurfont.
% \otherbackslash defines an active \ to be a literal `\' character with
% catcode other. We switch back and forth between these.
@@ -10239,8 +10625,7 @@ directory should work if nowhere else does.}
@address@hidden@address@hidden
% Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of
-% the literal character `\'. Also revert - to its normal character, in
-% case the active - from code has slipped in.
+% the literal character `\'.
%
address@hidden = @active
@address@hidden
@@ -10251,40 +10636,66 @@ directory should work if nowhere else does.}
@address@hidden
@let<address@hidden
@let>address@hidden
- @address@hidden
@address@hidden
@address@hidden
@let|address@hidden
@address@hidden
+ @address@hidden
@markupsetuplqdefault
@markupsetuprqdefault
@unsepspaces
}
}
-% Make _ and + \other characters, temporarily.
-% This is canceled by @fixbackslash.
address@hidden
+% If a .fmt file is being used, characters that might appear in a file
+% name cannot be active until we have parsed the command line.
+% So turn them off again, and have @fixbackslash turn them back on.
address@hidden@other @address@hidden@other
+% \enablebackslashhack - allow file to begin `\input texinfo'
+%
% If a .fmt file is being used, we don't want the `\input texinfo' to show up.
% That is what \eatinput is for; after that, the `\' should revert to printing
% a backslash.
-%
address@hidden@eatinput input address@hidden
address@hidden@let\ = @eatinput
+% If the file did not have a `\input texinfo', then it is turned off after
+% the first line; otherwise the first `\' in the file would cause an error.
+% This is used on the very last line of this file, texinfo.tex.
+% We also use @c to call @fixbackslash, in case ends of lines are hidden.
+{
address@hidden@^=7
address@hidden@address@hidden@enablebackslashhack{%
+ @address@hidden = @eatinput%
+ @address@hidden
+ @address@hidden@address@hidden
+ @def address@hidden@secondlinenl}%
+ @gdef @address@hidden@thirdlinenl}%
+ @gdef @address@hidden
+}}
+
address@hidden@^=7 @address@hidden
address@hidden@eatinput input address@hidden
-% On the other hand, perhaps the file did not have a `\input texinfo'. Then
-% the first `\' in the file would cause an error. This macro tries to fix
-% that, assuming it is called before the first `\' could plausibly occur.
-% Also turn back on active characters that might appear in the input
-% file name, in case not using a pre-dumped format.
-%
@address@hidden
- @address@hidden @let\ = @normalbackslash @fi
+ @address@hidden @let\ = @ttbackslash @fi
+ @catcode13=5 % regular end of line
+ @address@hidden@texinfoc
+ % Also turn back on active characters that might appear in the input
+ % file name, in case not using a pre-dumped format.
@address@hidden
@address@hidden@active
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc. This macro, @fixbackslash, gets
+ % called at the beginning of every Texinfo file. Not opening texinfo.cnf
+ % directly in this file, texinfo.tex, makes it possible to make a format
+ % file for Texinfo.
+ %
+ @openin 1 texinfo.cnf
+ @ifeof 1 @else @input texinfo.cnf @fi
+ @closein 1
}
+
% Say @foo, not \foo, in error messages.
@escapechar = `@@
@@ -10324,3 +10735,4 @@ directory should work if nowhere else does.}
@ignore
arch-tag: e1b36e32-c96e-4135-a41a-0b2efa2ea115
@end ignore
address@hidden
diff --git a/extension/build-aux/ChangeLog b/extension/build-aux/ChangeLog
index a97f468..e639826 100644
--- a/extension/build-aux/ChangeLog
+++ b/extension/build-aux/ChangeLog
@@ -1,3 +1,7 @@
+2015-09-25 Arnold D. Robbins <address@hidden>
+
+ * config.guess, config.sub, config.rpath: Updated.
+
2015-05-19 Arnold D. Robbins <address@hidden>
* 4.1.3: Release tar ball made.
diff --git a/extension/build-aux/config.guess b/extension/build-aux/config.guess
index dbfb978..3c022c5 100755
--- a/extension/build-aux/config.guess
+++ b/extension/build-aux/config.guess
@@ -2,7 +2,7 @@
# Attempt to guess a canonical system name.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-01-01'
+timestamp='2015-09-14'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -168,20 +168,27 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ /sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || \
+ echo unknown)`
case "${UNAME_MACHINE_ARCH}" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
+ earmv*)
+ arch=`echo ${UNAME_MACHINE_ARCH} | sed -e
's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne
's,^.*\(eb\)$,\1,p'`
+ machine=${arch}${endian}-unknown
+ ;;
*) machine=${UNAME_MACHINE_ARCH}-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently, or will in the future.
case "${UNAME_MACHINE_ARCH}" in
- arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ arm*|earm*|i386|m68k|ns32k|sh3*|sparc|vax)
eval $set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
@@ -197,6 +204,13 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
os=netbsd
;;
esac
+ # Determine ABI tags.
+ case "${UNAME_MACHINE_ARCH}" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+ ;;
+ esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
@@ -207,13 +221,13 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d.
-f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "${machine}-${os}${release}${abi}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -235,6 +249,9 @@ case
"${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
*:MirBSD:*:*)
echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
exit ;;
+ *:Sortix:*:*)
+ echo ${UNAME_MACHINE}-unknown-sortix
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -933,6 +950,9 @@ EOF
crisv32:Linux:*:*)
echo ${UNAME_MACHINE}-axis-linux-${LIBC}
exit ;;
+ e2k:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
frv:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -945,6 +965,9 @@ EOF
ia64:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
+ k1om:Linux:*:*)
+ echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ exit ;;
m32r*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
exit ;;
@@ -1021,7 +1044,7 @@ EOF
echo ${UNAME_MACHINE}-dec-linux-${LIBC}
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo ${UNAME_MACHINE}-pc-linux-${LIBC}
exit ;;
xtensa*:Linux:*:*)
echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
diff --git a/extension/build-aux/config.rpath b/extension/build-aux/config.rpath
index ab6fd99..a3e25c8 100755
--- a/extension/build-aux/config.rpath
+++ b/extension/build-aux/config.rpath
@@ -2,7 +2,7 @@
# Output a system dependent set of variables, describing how to set the
# run time search path of shared libraries in an executable.
#
-# Copyright 1996-2014 Free Software Foundation, Inc.
+# Copyright 1996-2015 Free Software Foundation, Inc.
# Taken from GNU libtool, 2001
# Originally by Gordon Matzigkeit <address@hidden>, 1996
#
@@ -367,11 +367,7 @@ else
dgux*)
hardcode_libdir_flag_spec='-L$libdir'
;;
- freebsd2.2*)
- hardcode_libdir_flag_spec='-R$libdir'
- hardcode_direct=yes
- ;;
- freebsd2*)
+ freebsd2.[01]*)
hardcode_direct=yes
hardcode_minus_L=yes
;;
@@ -548,13 +544,11 @@ case "$host_os" in
dgux*)
library_names_spec='$libname$shrext'
;;
+ freebsd[23].*)
+ library_names_spec='$libname$shrext$versuffix'
+ ;;
freebsd* | dragonfly*)
- case "$host_os" in
- freebsd[123]*)
- library_names_spec='$libname$shrext$versuffix' ;;
- *)
- library_names_spec='$libname$shrext' ;;
- esac
+ library_names_spec='$libname$shrext'
;;
gnu*)
library_names_spec='$libname$shrext'
diff --git a/extension/build-aux/config.sub b/extension/build-aux/config.sub
index 6d2e94c..1acc966 100755
--- a/extension/build-aux/config.sub
+++ b/extension/build-aux/config.sub
@@ -2,7 +2,7 @@
# Configuration validation subroutine script.
# Copyright 1992-2015 Free Software Foundation, Inc.
-timestamp='2015-01-01'
+timestamp='2015-08-20'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -117,7 +117,7 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* |
kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
kopensolaris*-gnu* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
@@ -255,11 +255,12 @@ case $basic_machine in
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
+ | ba \
| be32 | be64 \
| bfin \
| c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | epiphany \
+ | e2k | epiphany \
| fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
@@ -305,7 +306,7 @@ case $basic_machine in
| riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb |
shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet |
sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -376,12 +377,13 @@ case $basic_machine in
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
| c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
@@ -428,12 +430,13 @@ case $basic_machine in
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
| pyramid-* \
+ | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-*
| sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* |
sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
@@ -518,6 +521,9 @@ case $basic_machine in
basic_machine=i386-pc
os=-aros
;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -1373,7 +1379,7 @@ case $os in
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* |
-solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
| -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-----------------------------------------------------------------------
Summary of changes:
ChangeLog | 4 +
config.guess | 12 +-
config.rpath | 2 +-
config.sub | 11 +-
doc/ChangeLog | 4 +
doc/texinfo.tex | 1262 +++++++++++++++++++++++++-------------
extension/build-aux/ChangeLog | 4 +
extension/build-aux/config.guess | 37 +-
extension/build-aux/config.rpath | 18 +-
extension/build-aux/config.sub | 20 +-
10 files changed, 915 insertions(+), 459 deletions(-)
hooks/post-receive
--
gawk
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [gawk-diffs] [SCM] gawk branch, gawk-4.1-stable, updated. gawk-4.1.0-737-g3e762b6,
Arnold Robbins <=