[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] iDRAC7 IPMI error
From: |
Chu, Al |
Subject: |
Re: [Freeipmi-users] iDRAC7 IPMI error |
Date: |
Wed, 2 May 2018 16:06:15 +0000 |
I realize I said something stupid in the last post. I was confusing "SDR" with
"SEL" in my head. I assume this log came specifically from ipmi-sel?
So I'm assuming when you say ipmitool works, its working with ipmitool sel
commands?
Al
________________________________
From: Freeipmi-users <address@hidden> on behalf of Chu, Al <address@hidden>
Sent: Wednesday, May 2, 2018 8:54:42 AM
To: akrus; address@hidden
Subject: Re: [Freeipmi-users] iDRAC7 IPMI error
Hi,
I'm assuming this log is from ipmi-sensors, ipmi-sel, or ipmi-fru? For some
reason, the remote system isn't recognizing/responding to the "reserve SEL"
request. Lets try to get some debug info.
1) When you use ipmitool, are you using "-I lan" or "-I lanplus"?
I'm wondering if this is a ipmi 1.5 vs ipmi 2.0 issue, b/c you're using ipmi
2.0 w/ FreeIPMI in this log.
2) Have you tried using "-D lan" with FreeIPMI?
To see if this is a ipmi 1.5 vs ipmi 2.0 issue with FreeIPMI.
3) Have you tried using bmc-info across the network?
To see if this is specific to the "Reserve SEL" command vs something IPMI 1.5
vs IPMI 2.0 related. Perhaps you can try w/ -D lan and -D lan20 to see if it
works with both IPMI 1.5 and IPMI 2.0.
4) Could you try "ipmi-sel --info" across the network. This command does not
reserve the SEL, it's yet another data point.
Thanks,
Al
________________________________
From: akrus <address@hidden>
Sent: Wednesday, May 2, 2018 12:15:51 AM
To: Chu, Al; address@hidden
Subject: Re: [Freeipmi-users] iDRAC7 IPMI error
Hi,
Yes, I tried all the workaround options and it didn't help. Attaching
debug output here.
PS> ipmitool works well for remote connections, freeipmi works well
only with local IPMI device
On Mon, 2018-04-30 at 10:32 -0700, Albert Chu wrote:
> Hi Akrus,
>
> I assume you have tried some of the workaround options, and none of
> them work?
>
> Could you post the --debug output from one of your connection
> attempts.
> Perhaps the iDRAC7 has changed some internal implementation that
> doesn't jive with FreeIPMI.
>
> Al
>
> On Mon, 2018-04-30 at 17:05 +0300, akrus wrote:
> > Hello!
> >
> > I have Dell R620 server here with iDRAC7 (latest firmware) and
> > FreeIPMI
> > (tested 1.4.11 and 1.6.2), it always fails with internal IPMI error
> > using LAN_2_0.
> >
> > I can see that the server is responding over the network, but for
> > some
> > reason freeipmi fails.
> >
> > Did anyone experience same problem?
> >
> > Regards,
> > akrus.
> >
> > _______________________________________________
> > Freeipmi-users mailing list
> > address@hidden
> > https://lists.gnu.org/mailman/listinfo/freeipmi-users
_______________________________________________
Freeipmi-users mailing list
address@hidden
https://lists.gnu.org/mailman/listinfo/freeipmi-users