[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-users] ipmi support with HP iLO2 servers initial success!
From: |
Albert Chu |
Subject: |
Re: [Freeipmi-users] ipmi support with HP iLO2 servers initial success! |
Date: |
Wed, 07 Dec 2011 09:55:50 -0800 |
Hi John,
The short answer is there are a number of bugs in the HP iLO firmware.
But some combination of options and/or workaround flags will get around
them and allow you to use FreeIPMI w/ HP iLO. (Assuming no firmware
fixes have occurred since this thread.) See the manpage for a list of
workarounds.
My recollection is a lot of HP iLO machines do not support IPMI 1.5,
only IPMI 2.0, so you'll have to use "-D=LAN_2_0" to use IPMI 2.0.
Al
On Wed, 2011-12-07 at 01:36 -0800, john s. wrote:
>
> Hello Everybody
>
> Sorry for digging out this thread but i can't find no other (newer) post
> which is similar to this one ...
>
> If it does work, then there is a bug. Perhaps you can send me a --debug
> output and we can take a look to figure out what the bug is.
>
> command :
>
> ipmipower -h cut0iogw1-ilo -D LAN_2_0 -s
>
>
>
> so is it still a bug or is it the normal behaviour on hp ilo connects?
>
>
> best regards
>
> john s.
>
>
>
>
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory