[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Freeipmi-users] FreeIPMI recognizes OEM sensor, but it does not return
From: |
address@hidden |
Subject: |
[Freeipmi-users] FreeIPMI recognizes OEM sensor, but it does not return a reasonable state for it |
Date: |
Tue, 15 Feb 2011 18:09:50 +0100 |
User-agent: |
Opera Mail/11.01 (Win32) |
Hi,
I have a server where calling "ipmimonitoring --interpret-oem-data" returns
ID | Name | Type | State | Reading | Units | Event
74 | SD vFlash Status | Module/Board | N/A | N/A | N/A | 'OK'
So, the state is N/A while the event is OK. Perhaps, the state should also
be OK?
Please also see another mailinglist where this has already been discussed:
http://lists.thomas-krenn.com/pipermail/ipmi-plugin-user/2011-February/000104.html
Cheers
Lars
~# ipmi-sensors -V
ipmi-sensors - 1.0.1
~# bmc-info
Device ID : 32
Device Revision : 0
Device SDRs : supported
Firmware Revision : 1.30
Device Available : yes (normal operation)
IPMI Version : 2.0
Sensor Device : supported
SDR Repository Device : supported
SEL Device : supported
FRU Inventory Device : supported
IPMB Event Receiver : supported
IPMB Event Generator : unsupported
Bridge : supported
Chassis Device : supported
Manufacturer ID : Dell Inc. (674)
Product ID : 256
Auxiliary Firmware Revision Information : 00001800h
GUID : 4A34524F-C0B9-5880-104A-004B4C4C4544
System Firmware Version : 1.2.1
System Name :
Primary Operating System Name :
Operating System Name :
Channel Information
Channel Number : 0
Medium Type : IPMB (I2C)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum
(7154)
Channel Number : 1
Medium Type : 802.3 LAN
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : multi-session
Vendor ID : Intelligent Platform Management Interface forum
(7154)
Channel Number : 2
Medium Type : Asynch. Serial/Modem (RS-232)
Protocol Type : IPMB-1.0
Active Session Count : 0
Session Support : single-session
Vendor ID : Intelligent Platform Management Interface forum
(7154)
Channel Number : 3
Medium Type : System Interface (KCS, SMIC, or BT)
Protocol Type : KCS
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum
(7154)
Channel Number : 4
Medium Type : System Interface (KCS, SMIC, or BT)
Protocol Type : KCS
Active Session Count : 0
Session Support : session-less
Vendor ID : Intelligent Platform Management Interface forum
(7154)
- [Freeipmi-users] FreeIPMI recognizes OEM sensor, but it does not return a reasonable state for it,
address@hidden <=