[sr #110963] ipmi-sensors does not return fan rpm on Lenovo SR650 v3 but ipmitool does

[Albert Chu]

Follow-up Comment #18, sr #110963 (project freeipmi):

Actually I just noticed something in your out of band debug output.

```
>> Sending IPMI command payload
>>    netfn   : 0x04
>>    command : 0x2d
BUILDING A v2 COMMAND
Local RqAddr 0x20 transit 0:0 target 0x20:0 bridgePossible 1
<< IPMI Response Session Header
<<   Authtype                : RMCP+
<<   Payload type            : IPMI (0)
<<   Session ID              : 0xa0a2a3a4
<<   Sequence                : 0x00000309
<<   IPMI Msg/Payload Length : 32
<< IPMI Response Message Header
<<   Rq Addr    : 81
<<   NetFn      : 05
<<   Rq LUN     : 0
<<   Rs Addr    : 20
<<   Rq Seq     : 0f
<<   Rs Lun     : 0
<<   Command    : 2d
<<   Compl Code : 0x00

```

This is the "get sensor reading" command, and it apparently doesn't return an
error (completion code == 0).


Could you do the out of band --debug --bridge-sensors output again?  Your
debug output of that before didn't connect to the server.

i.e. ipmi-sensors -r NUMBER --debug --bridge-sensors -h host -u user -p
password



    _______________________________________________________

Reply to this item at:

  <https://savannah.gnu.org/support/?110963>

_______________________________________________
Message sent via Savannah
https://savannah.gnu.org/