freeipmi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[sr #110963] ipmi-sensors does not return fan rpm on Lenovo SR650 v3 but


From: Albert Chu
Subject: [sr #110963] ipmi-sensors does not return fan rpm on Lenovo SR650 v3 but ipmitool does
Date: Thu, 30 Nov 2023 13:09:10 -0500 (EST)

Follow-up Comment #12, sr #110963 (project freeipmi):

Hmmm I see

> Sensor reading/event_bitmask retrieval error: sensor reading
> cannot be obtained

The error code is 0xC3 indicating a timeout.

question, you are using the linux ipmi driver, right?  Normally reading from
/dev/ipmi0?  If by chance it's not using it, you can force it with
"ipmi-sensors -D openipmi"

could you get the debug output from ipmitool to show how it's getting the
sensor reading?  Perhaps there will be a clue.

I think `ipmitool sdr -vvv get "Fan 1 Front Tach"` should get it.

(If possible both inband and outofband ... unfortunately, it doesn't appear
ipmitool outputs a lot of debug info with inband).




    _______________________________________________________

Reply to this item at:

  <https://savannah.gnu.org/support/?110963>

_______________________________________________
Message sent via Savannah
https://savannah.gnu.org/




reply via email to

[Prev in Thread] Current Thread [Next in Thread]