Re: [Freeipmi-devel] Support for Supermicro motherboard-H8SGL-F

[Luke]

Hi Al,

I tried the master branch and it looks good.

ipmi-sensors --output-sensor-state --interpret-oem-data
--ignore-unrecognized-events
ID   | Name        | Type              | State    | Reading    | Units |
Event
4    | CPU Temp    | OEM Reserved      | Nominal  | N/A        | N/A   |
'Low'
71   | System Temp | Temperature       | Nominal  | 33.00      | C     |
'OK'
138  | CPU Vcore   | Voltage           | Nominal  | 1.00       | V     |
'OK'
205  | CPU DIMM    | Voltage           | Nominal  | 1.51       | V     |
'OK'
272  | CPU Mem VTT | Voltage           | Nominal  | 0.75       | V     |
'OK'
339  | +1.1 V      | Voltage           | Nominal  | 1.10       | V     |
'OK'
406  | +1.8 V      | Voltage           | Nominal  | 1.85       | V     |
'OK'
473  | +5 V        | Voltage           | Nominal  | 5.12       | V     |
'OK'
540  | +12 V       | Voltage           | Nominal  | 11.87      | V     |
'OK'
607  | -12 V       | Voltage           | Nominal  | -11.80     | V     |
'OK'
674  | HT Voltage  | Voltage           | Nominal  | 1.19       | V     |
'OK'
741  | +3.3 V      | Voltage           | Nominal  | 3.34       | V     |
'OK'
808  | +3.3VSB     | Voltage           | Nominal  | 3.24       | V     |
'OK'
875  | VBAT        | Voltage           | Nominal  | 3.24       | V     |
'OK'
942  | FAN 1       | Fan               | N/A      | N/A        | RPM   | N/A
1009 | FAN 2       | Fan               | Nominal  | 4096.00    | RPM   |
'OK'
1076 | FAN 3       | Fan               | Nominal  | 4096.00    | RPM   |
'OK'
1143 | FAN 4       | Fan               | Nominal  | 4096.00    | RPM   |
'OK'
1210 | FAN 5       | Fan               | Nominal  | 3600.00    | RPM   |
'OK'
1277 | FAN 6       | Fan               | Nominal  | 3600.00    | RPM   |
'OK'
1344 | Intrusion   | Physical Security | Critical | N/A        | N/A   |
'General Chassis Intrusion'
1411 | PS Status   | Power Supply      | Nominal  | N/A        | N/A   |
'Presence detected'

Thanks a lot!

I also created a Dockerfile for easily creating debian packages of the
master branch:
https://github.com/reusserl/freeipmi-packagebuild-debian-docker

Thanks again!
Luke