[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] [RE]Re: [Freeipmi-users] [FW][RE]RE: I would apprec
|
From: |
Albert Chu |
|
Subject: |
Re: [Freeipmi-devel] [RE]Re: [Freeipmi-users] [FW][RE]RE: I would appreciate any adviceonhow totroubleshootthisissue.(ipmi_sdr_cache_create: internal IPMI error) |
|
Date: |
Tue, 04 Nov 2014 14:01:01 -0800 |
I've commited something new to the same branch as before. Could you try
again? The workaround flag is no longer needed.
svn co http://svn.savannah.gnu.org/svn/freeipmi/branches/nosdrinfo
freeipmi
cd freeipmi
./autogen.sh
./configure
make
ipmi-sensors/ipmi-sensors
If it doesn't work, please send the --debug output.
The code I implemented is not tested. I could not find a motherboard
that had (what I believe to be) your unique situation. So we may have
to iterate several times.
Al
On Tue, 2014-11-04 at 09:06 +0900, 김순규 wrote:
> Hi, Al
>
>
>
> check the below and thank you.
>
>
>
> address@hidden: ~]# bmc-info --get-device-id
> Device ID : 0
> Device Revision : 0
> Device SDRs : supported
> Firmware Revision : 2.00
> Device Available : yes (normal operation)
> IPMI Version : 1.5
> Sensor Device : supported
> SDR Repository Device : unsupported
> SEL Device : supported
> FRU Inventory Device : supported
> IPMB Event Receiver : unsupported
> IPMB Event Generator : supported
> Bridge : unsupported
> Chassis Device : unsupported
> Manufacturer ID : Emerson Network Power, Embedded Computing
> (26061)
> Product ID : 38
> Auxiliary Firmware Revision Information : 23000000h
> address@hidden: ~]# bmc-info -V
> bmc-info - 1.4.6
> Copyright (C) 2003-2014 FreeIPMI Core Team
> This program is free software; you may redistribute it under the terms
> of
> the GNU General Public License. This program has absolutely no
> warranty.
> address@hidden: ~]# ipmitool sdr list -vvv
> ipmitool: error while loading shared libraries: libfreeipmi.so.16:
> cannot open shared object file: No such file or directory
> address@hidden: ~]# ldconfig /usr/local/lib
> address@hidden: ~]# ipmitool sdr list -vvv
> Using ipmi device 0
> Set IPMB address to 0x20
> OpenIPMI Request Message Header:
> netfn = 0x6
> cmd = 0x1
> Iana: 26061
> Running Get PICMG Properties my_addr 0x20, transit 0, target 0
> OpenIPMI Request Message Header:
> netfn = 0x2c
> cmd = 0x0
> OpenIPMI Request Message Data (1 bytes)
> 00
> Discovered PICMG Extension 2.3
> Running PICMG Get Address Info
> OpenIPMI Request Message Header:
> netfn = 0x2c
> cmd = 0x1
> OpenIPMI Request Message Data (1 bytes)
> 00
> Discovered IPMB-0 address 0x9c
> Interface address: my_addr 0x9c transit 0:0 target 0:0 ipmb_target 0
>
> Querying SDR for sensor list
> OpenIPMI Request Message Header:
> netfn = 0x6
> cmd = 0x1
> Using Device SDRs
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x20
> SDR records : 46
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x22
> SDR reservation ID 0016
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 00 00 00 05
> SDR record ID : 0x0000
> SDR record id mismatch: 0x0001
> SDR record type : 0x12
> SDR record next : 0x0002
> SDR record bytes: 20
> Getting 20 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 00 00 05 14
> SDR record ID : 0x0000
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 02 00 00 05
> SDR record ID : 0x0002
> SDR record type : 0x01
> SDR record next : 0x0003
> SDR record bytes: 58
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 02 00 05 21
> Getting 25 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 02 00 26 19
> SDR record ID : 0x0002
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 00
> Sensor ID : Hotswap Carrier (0x0)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): PICMG FRU Hotswap (0xf0)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> States Asserted : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 00
> Assertion Events : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 00
> Assertions Enabled : FRU Hot Swap
> [Transition to M0]
> [Transition to M1]
> [Transition to M2]
> [Transition to M3]
> [Transition to M4]
> [Transition to M5]
> [Transition to M6]
> [Transition to M7]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 03 00 00 05
> SDR record ID : 0x0003
> SDR record type : 0x01
> SDR record next : 0x0004
> SDR record bytes: 54
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 03 00 05 21
> Getting 21 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 03 00 26 15
> SDR record ID : 0x0003
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 01
> Sensor ID : Hotswap_AMC (0x1)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Discrete): PICMG FRU Hotswap (0xf0)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> States Asserted : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 01
> Assertion Events : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 01
> Assertions Enabled : FRU Hot Swap
> [Transition to M0]
> [Transition to M1]
> [Transition to M2]
> [Transition to M3]
> [Transition to M4]
> [Transition to M5]
> [Transition to M6]
> [Transition to M7]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 04 00 00 05
> SDR record ID : 0x0004
> SDR record type : 0x01
> SDR record next : 0x0005
> SDR record bytes: 54
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 04 00 05 21
> Getting 21 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 04 00 26 15
> SDR record ID : 0x0004
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 02
> Sensor ID : Hotswap_RTM (0x2)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Discrete): PICMG FRU Hotswap (0xf0)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> States Asserted : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 02
> Assertion Events : FRU Hot Swap
> [Transition to M4]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 02
> Assertions Enabled : FRU Hot Swap
> [Transition to M0]
> [Transition to M1]
> [Transition to M2]
> [Transition to M3]
> [Transition to M4]
> [Transition to M5]
> [Transition to M6]
> [Transition to M7]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 05 00 00 05
> SDR record ID : 0x0005
> SDR record type : 0x01
> SDR record next : 0x0006
> SDR record bytes: 55
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 05 00 05 21
> Getting 22 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 05 00 26 16
> SDR record ID : 0x0005
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 03
> Sensor ID : -48V A Volts (0x3)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 4.550 (+/- 0) Volts
> Status : Lower Non-Recoverable
> Upper non-recoverable : 73.450
> Upper critical : 72.475
> Lower non-recoverable : 39.000
> Lower critical : 40.300
> Positive Hysteresis : 0.650
> Negative Hysteresis : 0.650
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 03
> Assertion Events : lnc+ lcr- lnr- unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 03
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 06 00 00 05
> SDR record ID : 0x0006
> SDR record type : 0x01
> SDR record next : 0x0007
> SDR record bytes: 55
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 06 00 05 21
> Getting 22 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 06 00 26 16
> SDR record ID : 0x0006
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 04
> Sensor ID : -48V B Volts (0x4)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 50.700 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 73.450
> Upper critical : 72.475
> Lower non-recoverable : 39.000
> Lower critical : 40.300
> Positive Hysteresis : 0.650
> Negative Hysteresis : 0.650
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 04
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 04
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 07 00 00 05
> SDR record ID : 0x0007
> SDR record type : 0x01
> SDR record next : 0x0008
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 07 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 07 00 26 13
> SDR record ID : 0x0007
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 05
> Sensor ID : -48V Amps (0x5)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Threshold) : Current (0x03)
> Sensor Reading : 1.410 (+/- 0) Amps
> Status : ok
> Positive Hysteresis : 0.188
> Negative Hysteresis : 0.188
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : No Thresholds
> Settable Thresholds : No Thresholds
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 05
> Event Status : Event Messages Disabled
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 05
> Event Enable : Event Messages Disabled
> Assertions Enabled :
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 08 00 00 05
> SDR record ID : 0x0008
> SDR record type : 0x01
> SDR record next : 0x0009
> SDR record bytes: 59
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 08 00 05 21
> Getting 26 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 08 00 26 1a
> SDR record ID : 0x0008
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 06
> Sensor ID : HoldUp Cap Volts (0x6)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 93.132 (+/- 0) Volts
> Status : ok
> Positive Hysteresis : 1.194
> Negative Hysteresis : 1.194
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : No Thresholds
> Settable Thresholds : No Thresholds
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 06
> Event Status : Event Messages Disabled
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 06
> Event Enable : Event Messages Disabled
> Assertions Enabled :
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 09 00 00 05
> SDR record ID : 0x0009
> SDR record type : 0x01
> SDR record next : 0x000a
> SDR record bytes: 57
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 09 00 05 21
> Getting 24 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 09 00 26 18
> SDR record ID : 0x0009
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 07
> Sensor ID : PWR Entry Temp (0x7)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 36.340 (+/- 0) degrees C
> Status : ok
> Upper critical : 75.540
> Upper non-critical : 65.740
> Positive Hysteresis : 3.920
> Negative Hysteresis : 3.920
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr
> Settable Thresholds : unc ucr
> Threshold Read Mask : unc ucr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 07
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 07
> Assertions Enabled : unc+ ucr+
> Deassertions Enabled : unc+ ucr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0a 00 00 05
> SDR record ID : 0x000a
> SDR record type : 0x01
> SDR record next : 0x000b
> SDR record bytes: 59
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0a 00 05 21
> Getting 26 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0a 00 26 1a
> SDR record ID : 0x000a
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 08
> Sensor ID : PWR Entry Status (0x8)
> Entity ID : 10.96 (Power Supply)
> Sensor Type (Discrete): Unknown (0xD7) (0xd7)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 08
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 08
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0b 00 00 05
> SDR record ID : 0x000b
> SDR record type : 0x01
> SDR record next : 0x000c
> SDR record bytes: 59
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0b 00 05 21
> Getting 26 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0b 00 26 1a
> SDR record ID : 0x000b
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 09
> Sensor ID : Bottom Edge Temp (0x9)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 27 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 66.000
> Upper critical : 57.000
> Upper non-critical : 44.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 09
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 09
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0c 00 00 05
> SDR record ID : 0x000c
> SDR record type : 0x01
> SDR record next : 0x000d
> SDR record bytes: 56
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0c 00 05 21
> Getting 23 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0c 00 26 17
> SDR record ID : 0x000c
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0a
> Sensor ID : Top Edge Temp (0xa)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 40 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 85.000
> Upper critical : 76.000
> Upper non-critical : 66.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0a
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0a
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0d 00 00 05
> SDR record ID : 0x000d
> SDR record type : 0x01
> SDR record next : 0x000e
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0d 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0d 00 26 13
> SDR record ID : 0x000d
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0b
> Sensor ID : IPMC Temp (0xb)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 33 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 88.000
> Upper critical : 79.000
> Upper non-critical : 69.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0b
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0b
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0e 00 00 05
> SDR record ID : 0x000e
> SDR record type : 0x01
> SDR record next : 0x000f
> SDR record bytes: 51
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0e 00 05 21
> Getting 18 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0e 00 26 12
> SDR record ID : 0x000e
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0c
> Sensor ID : CPU Temp (0xc)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 32 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 95.000
> Upper critical : 85.000
> Upper non-critical : 70.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0c
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0c
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0f 00 00 05
> SDR record ID : 0x000f
> SDR record type : 0x01
> SDR record next : 0x0010
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0f 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 0f 00 26 14
> SDR record ID : 0x000f
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0d
> Sensor ID : DDR 1 Temp (0xd)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 30 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0d
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0d
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 10 00 00 05
> SDR record ID : 0x0010
> SDR record type : 0x01
> SDR record next : 0x0011
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 10 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 10 00 26 14
> SDR record ID : 0x0010
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0e
> Sensor ID : DDR 2 Temp (0xe)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 30 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0e
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0e
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 11 00 00 05
> SDR record ID : 0x0011
> SDR record type : 0x01
> SDR record next : 0x0012
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 11 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 11 00 26 14
> SDR record ID : 0x0011
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 0f
> Sensor ID : DDR 3 Temp (0xf)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 29 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 0f
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 0f
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 12 00 00 05
> SDR record ID : 0x0012
> SDR record type : 0x01
> SDR record next : 0x0013
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 12 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 12 00 26 14
> SDR record ID : 0x0012
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 10
> Sensor ID : DDR 4 Temp (0x10)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 29 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 10
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 10
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 13 00 00 05
> SDR record ID : 0x0013
> SDR record type : 0x01
> SDR record next : 0x0014
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 13 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 13 00 26 14
> SDR record ID : 0x0013
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 11
> Sensor ID : DDR 5 Temp (0x11)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 30 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 11
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 11
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 14 00 00 05
> SDR record ID : 0x0014
> SDR record type : 0x01
> SDR record next : 0x0015
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 14 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 14 00 26 14
> SDR record ID : 0x0014
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 12
> Sensor ID : DDR 6 Temp (0x12)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 30 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 90.000
> Upper critical : 81.000
> Upper non-critical : 71.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 12
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 12
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 15 00 00 05
> SDR record ID : 0x0015
> SDR record type : 0x01
> SDR record next : 0x0016
> SDR record bytes: 56
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 15 00 05 21
> Getting 23 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 15 00 26 17
> SDR record ID : 0x0015
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 13
> Sensor ID : IPMB Physical (0x13)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): PICMG IPMB0 Link State (0xf1)
> Event Type Code : 0x6f
> Sensor Reading : 88h
> Event Message Control : Entire Sensor Only
> States Asserted : IPMB-0 Status
> [IPMB-A enabled, IPMP-B enabled]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 13
> Assertion Events : IPMB-0 Status
> [IPMB-A enabled, IPMP-B enabled]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 13
> Assertions Enabled : IPMB-0 Status
> [IPMB-A disabled, IPMB-B disabled]
> [IPMB-A enabled, IPMB-B disabled]
> [IPMB-A disabled, IPMB-B enabled]
> [IPMB-A enabled, IPMP-B enabled]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 16 00 00 05
> SDR record ID : 0x0016
> SDR record type : 0x01
> SDR record next : 0x0017
> SDR record bytes: 55
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 16 00 05 21
> Getting 22 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 16 00 26 16
> SDR record ID : 0x0016
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 14
> Sensor ID : BMC Watchdog (0x14)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Watchdog2 (0x23)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 14
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 14
> Assertions Enabled : Watchdog 2
> [Timer expired]
> [Hard reset]
> [Power down]
> [Power cycle]
> [Timer interrupt]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 17 00 00 05
> SDR record ID : 0x0017
> SDR record type : 0x01
> SDR record next : 0x0018
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 17 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 17 00 26 13
> SDR record ID : 0x0017
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 15
> Sensor ID : IPMC POST (0x15)
> Entity ID : 46.96 (Management Controller Firmware)
> Sensor Type (Discrete): Management Subsys Health (0x28)
> Event Type Code : 0x06
> Sensor Reading : 0h
> Event Message Control : Per-threshold
> States Asserted : Digital State
> [Performance Met]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 15
> Assertion Events : Digital State
> [Performance Met]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 15
> Assertions Enabled : Digital State
> [Performance Met]
> [Performance Lags]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 18 00 00 05
> SDR record ID : 0x0018
> SDR record type : 0x01
> SDR record next : 0x0019
> SDR record bytes: 57
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 18 00 05 21
> Getting 24 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 18 00 26 18
> SDR record ID : 0x0018
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 16
> Sensor ID : Version Change (0x16)
> Entity ID : 46.96 (Management Controller Firmware)
> Sensor Type (Discrete): Version Change (0x2b)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 16
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 16
> Assertions Enabled : Version Change
> [Hardware change detected]
> [Hardware incompatibility detected]
> [Firmware or software incompatibility
> detected]
> [Invalid or unsupported hardware version]
> [Invalid or unsupported firmware or software
> version]
> [Hardware change success]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 19 00 00 05
> SDR record ID : 0x0019
> SDR record type : 0x01
> SDR record next : 0x001a
> SDR record bytes: 54
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 19 00 05 21
> Getting 21 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 19 00 26 15
> SDR record ID : 0x0019
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 17
> Sensor ID : Fw Progress (0x17)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): System Firmwares (0x0f)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> States Asserted : System Firmware Error
> [Unknown Progress]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 17
> Assertion Events : System Firmware Error
> [Unknown Progress]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 17
> Assertions Enabled : System Firmware Error
> [Unknown Error]
> [Unknown Hang]
> [Unknown Progress]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1a 00 00 05
> SDR record ID : 0x001a
> SDR record type : 0x01
> SDR record next : 0x001b
> SDR record bytes: 50
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1a 00 05 21
> Getting 17 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1a 00 26 11
> SDR record ID : 0x001a
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 18
> Sensor ID : OS Boot (0x18)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): OS Boot (0x1f)
> Event Type Code : 0x6f
> Sensor Reading : No Reading
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 18
> Event Status : Unavailable
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 18
> Assertions Enabled : OS Boot
> [A: boot completed]
> [C: boot completed]
> [PXE boot completed]
> [Diagnostic boot completed]
> [CD-ROM boot completed]
> [ROM boot completed]
> [boot completed - device not specified]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1b 00 00 05
> SDR record ID : 0x001b
> SDR record type : 0x01
> SDR record next : 0x001c
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1b 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1b 00 26 14
> SDR record ID : 0x001b
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 19
> Sensor ID : Boot Error (0x19)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Boot Error (0x1e)
> Event Type Code : 0x6f
> Sensor Reading : No Reading
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 19
> Event Status : Unavailable
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 19
> Assertions Enabled : Boot Error
> [No bootable media]
> [Non-bootable disk in drive]
> [PXE server not found]
> [Invalid boot sector]
> [Timeout waiting for selection]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1c 00 00 05
> SDR record ID : 0x001c
> SDR record type : 0x01
> SDR record next : 0x001d
> SDR record bytes: 57
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1c 00 05 21
> Getting 24 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1c 00 26 18
> SDR record ID : 0x001c
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1a
> Sensor ID : Boot Initiated (0x1a)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): System Boot Initiated (0x1d)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> States Asserted : System Boot Initiated
> [Initiated by warm reset]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1a
> Assertion Events : System Boot Initiated
> [Initiated by warm reset]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1a
> Assertions Enabled : System Boot Initiated
> [Initiated by power up]
> [Initiated by hard reset]
> [Initiated by warm reset]
> [User requested PXE boot]
> [Automatic boot to diagnostic]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1d 00 00 05
> SDR record ID : 0x001d
> SDR record type : 0x01
> SDR record next : 0x001e
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1d 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1d 00 26 13
> SDR record ID : 0x001d
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1b
> Sensor ID : POST Code (0x1b)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Unknown (0xD2) (0xd2)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Per-threshold
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1b
> Event Status : Event Messages Disabled
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1b
> Event Enable : Event Messages Disabled
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1e 00 00 05
> SDR record ID : 0x001e
> SDR record type : 0x01
> SDR record next : 0x001f
> SDR record bytes: 57
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1e 00 05 21
> Getting 24 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1e 00 26 18
> SDR record ID : 0x001e
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1c
> Sensor ID : ATCA-7367 IPMC (0x1c)
> Entity ID : 46.96 (Management Controller Firmware)
> Sensor Type (Discrete): Unknown (0xD5) (0xd5)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1c
> Event Status : Event Messages Disabled
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1c
> Event Enable : Event Messages Disabled
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1f 00 00 05
> SDR record ID : 0x001f
> SDR record type : 0x01
> SDR record next : 0x0020
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1f 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 1f 00 26 14
> SDR record ID : 0x001f
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1d
> Sensor ID : Power Good (0x1d)
> Entity ID : 20.96 (Power Module)
> Sensor Type (Discrete): Entity Presence (0x25)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Per-threshold
> States Asserted : Entity Presence
> [Present]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1d
> Assertion Events : Entity Presence
> [Present]
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1d
> Assertions Enabled : Entity Presence
> [Present]
> [Absent]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 20 00 00 05
> SDR record ID : 0x0020
> SDR record type : 0x01
> SDR record next : 0x0021
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 20 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 20 00 26 13
> SDR record ID : 0x0020
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1e
> Sensor ID : Boot Bank (0x1e)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Unknown (0xD2) (0xd2)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1e
> Event Status : Event Messages Disabled
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1e
> Event Enable : Event Messages Disabled
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 21 00 00 05
> SDR record ID : 0x0021
> SDR record type : 0x01
> SDR record next : 0x0022
> SDR record bytes: 55
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 21 00 05 21
> Getting 22 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 21 00 26 16
> SDR record ID : 0x0021
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 1f
> Sensor ID : Reset Source (0x1f)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Unknown (0xD2) (0xd2)
> Event Type Code : 0x6f
> Sensor Reading : 0h
> Event Message Control : Per-threshold
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 1f
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 1f
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 22 00 00 05
> SDR record ID : 0x0022
> SDR record type : 0x01
> SDR record next : 0x0023
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 22 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 22 00 26 14
> SDR record ID : 0x0022
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 20
> Sensor ID : CPU Status (0x20)
> Entity ID : 160.96 (PICMG Front Board)
> Sensor Type (Discrete): Processor (0x07)
> Event Type Code : 0x6f
> Sensor Reading : No Reading
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 20
> Event Status : Unavailable
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 20
> Assertions Enabled : Processor
> [Thermal Trip]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 23 00 00 05
> SDR record ID : 0x0023
> SDR record type : 0x09
> SDR record next : 0x0024
> SDR record bytes: 27
> Getting 27 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 23 00 05 1b
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 24 00 00 05
> SDR record ID : 0x0024
> SDR record type : 0x09
> SDR record next : 0x0025
> SDR record bytes: 27
> Getting 27 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 24 00 05 1b
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 25 00 00 05
> SDR record ID : 0x0025
> SDR record type : 0x11
> SDR record next : 0x0026
> SDR record bytes: 19
> Getting 19 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 25 00 05 13
> SDR record ID : 0x0025
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 26 00 00 05
> SDR record ID : 0x0026
> SDR record type : 0x01
> SDR record next : 0x0027
> SDR record bytes: 48
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 26 00 05 21
> Getting 15 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 26 00 26 0f
> SDR record ID : 0x0026
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 40
> Sensor ID : +3.3V (0x40)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 3.319 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 3.605
> Upper critical : 3.505
> Upper non-critical : 3.462
> Lower non-recoverable : 3.005
> Lower critical : 3.105
> Lower non-critical : 3.162
> Positive Hysteresis : 0.057
> Negative Hysteresis : 0.057
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr lnc unc ucr unr
> Settable Thresholds : lnr lcr lnc unc ucr unr
> Threshold Read Mask : lnr lcr lnc unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 40
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 40
> Assertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
> Deassertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 27 00 00 05
> SDR record ID : 0x0027
> SDR record type : 0x01
> SDR record next : 0x0028
> SDR record bytes: 46
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 27 00 05 21
> Getting 13 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 27 00 26 0d
> SDR record ID : 0x0027
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 41
> Sensor ID : +5V (0x41)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 4.999 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 5.514
> Upper critical : 5.367
> Upper non-critical : 5.269
> Lower non-recoverable : 4.509
> Lower critical : 4.656
> Lower non-critical : 4.754
> Positive Hysteresis : 0.123
> Negative Hysteresis : 0.123
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr lnc unc ucr unr
> Settable Thresholds : lnr lcr lnc unc ucr unr
> Threshold Read Mask : lnr lcr lnc unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 41
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 41
> Assertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
> Deassertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 28 00 00 05
> SDR record ID : 0x0028
> SDR record type : 0x01
> SDR record next : 0x0029
> SDR record bytes: 47
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 28 00 05 21
> Getting 14 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 28 00 26 0e
> SDR record ID : 0x0028
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 42
> Sensor ID : +12V (0x42)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 11.787 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 14.043
> Upper critical : 13.822
> Upper non-critical : 13.218
> Lower non-recoverable : 10.027
> Lower critical : 10.248
> Lower non-critical : 10.853
> Positive Hysteresis : 0.110
> Negative Hysteresis : 0.110
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr lnc unc ucr unr
> Settable Thresholds : lnr lcr lnc unc ucr unr
> Threshold Read Mask : lnr lcr lnc unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 42
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 42
> Assertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
> Deassertions Enabled : lnc- lcr- lnr- unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 29 00 00 05
> SDR record ID : 0x0029
> SDR record type : 0x01
> SDR record next : 0x002a
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 29 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 29 00 26 14
> SDR record ID : 0x0029
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 43
> Sensor ID : Board Temp (0x43)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 41.900 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 81.150
> Upper critical : 70.160
> Upper non-critical : 60.740
> Positive Hysteresis : 6.280
> Negative Hysteresis : 6.280
> Minimum sensor range : -39.740
> Maximum sensor range : 125.110
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 43
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 43
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2a 00 00 05
> SDR record ID : 0x002a
> SDR record type : 0x01
> SDR record next : 0x002b
> SDR record bytes: 53
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2a 00 05 21
> Getting 20 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2a 00 26 14
> SDR record ID : 0x002a
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 44
> Sensor ID : Inlet Temp (0x44)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 36 (+/- 0) degrees C
> Status : ok
> Upper non-recoverable : 70.000
> Upper critical : 60.000
> Upper non-critical : 50.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr unr
> Settable Thresholds : unc ucr unr
> Threshold Read Mask : unc ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 44
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 44
> Assertions Enabled : unc+ ucr+ unr+
> Deassertions Enabled : unc+ ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2b 00 00 05
> SDR record ID : 0x002b
> SDR record type : 0x01
> SDR record next : 0x002c
> SDR record bytes: 57
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2b 00 05 21
> Getting 24 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2b 00 26 18
> SDR record ID : 0x002b
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 45
> Sensor ID : Version change (0x45)
> Entity ID : 193.101 (PICMG AdvancedMC Module)
> Sensor Type (Discrete): Version Change (0x2b)
> Event Type Code : 0x6f
> Sensor Reading : No Reading
> Event Message Control : Entire Sensor Only
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 45
> Event Status : Unavailable
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 45
> Assertions Enabled : Version Change
> [Hardware change detected]
> [Hardware incompatibility detected]
> [Firmware or software incompatibility
> detected]
> [Invalid or unsupported hardware version]
> [Invalid or unsupported firmware or software
> version]
> [Hardware change success]
> OEM : 0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2c 00 00 05
> SDR record ID : 0x002c
> SDR record type : 0x11
> SDR record next : 0x002d
> SDR record bytes: 25
> Getting 25 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2c 00 05 19
> SDR record ID : 0x002c
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2d 00 00 05
> SDR record ID : 0x002d
> SDR record type : 0x01
> SDR record next : 0x002e
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2d 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2d 00 26 13
> SDR record ID : 0x002d
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 60
> Sensor ID : +3.3V RTM (0x60)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 3.299 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 3.709
> Upper critical : 3.611
> Lower non-recoverable : 2.909
> Lower critical : 3.007
> Positive Hysteresis : 0.039
> Negative Hysteresis : 0.039
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 60
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 60
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2e 00 00 05
> SDR record ID : 0x002e
> SDR record type : 0x01
> SDR record next : 0x002f
> SDR record bytes: 51
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2e 00 05 21
> Getting 18 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2e 00 26 12
> SDR record ID : 0x002e
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 61
> Sensor ID : +12V RTM (0x61)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 11.954 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 13.252
> Upper critical : 12.957
> Lower non-recoverable : 10.834
> Lower critical : 11.129
> Positive Hysteresis : 0.059
> Negative Hysteresis : 0.059
> Minimum sensor range : 0.036
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 61
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 61
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2f 00 00 05
> SDR record ID : 0x002f
> SDR record type : 0x01
> SDR record next : 0x0030
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2f 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 2f 00 26 13
> SDR record ID : 0x002f
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 62
> Sensor ID : +1.2V RTM (0x62)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 1.220 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 1.500
> Upper critical : 1.260
> Lower non-recoverable : 0.900
> Lower critical : 1.140
> Positive Hysteresis : 0.030
> Negative Hysteresis : 0.030
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 62
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 62
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 30 00 00 05
> SDR record ID : 0x0030
> SDR record type : 0x01
> SDR record next : 0x0031
> SDR record bytes: 52
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 30 00 05 21
> Getting 19 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 30 00 26 13
> SDR record ID : 0x0030
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 63
> Sensor ID : +1.0V RTM (0x63)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Voltage (0x02)
> Sensor Reading : 1.000 (+/- 0) Volts
> Status : ok
> Upper non-recoverable : 1.618
> Upper critical : 1.079
> Lower non-recoverable : 0.393
> Lower critical : 0.931
> Positive Hysteresis : 0.029
> Negative Hysteresis : 0.029
> Minimum sensor range : Unspecified
> Maximum sensor range : Unspecified
> Event Message Control : Per-threshold
> Readable Thresholds : lnr lcr ucr unr
> Settable Thresholds : lnr lcr ucr unr
> Threshold Read Mask : lnr lcr ucr unr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 63
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 63
> Assertions Enabled : lcr- lnr- ucr+ unr+
> Deassertions Enabled : lcr- lnr- ucr+ unr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 31 00 00 05
> SDR record ID : 0x0031
> SDR record type : 0x01
> SDR record next : 0x0032
> SDR record bytes: 54
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 31 00 05 21
> Getting 21 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 31 00 26 15
> SDR record ID : 0x0031
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 64
> Sensor ID : temp in RTM (0x64)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 27 (+/- 0) degrees C
> Status : ok
> Upper critical : 55.000
> Upper non-critical : 40.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr
> Settable Thresholds : unc ucr
> Threshold Read Mask : unc ucr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 64
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 64
> Assertions Enabled : unc+ ucr+
> Deassertions Enabled : unc+ ucr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 32 00 00 05
> SDR record ID : 0x0032
> SDR record type : 0x01
> SDR record next : 0x0033
> SDR record bytes: 51
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 32 00 05 21
> Getting 18 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 32 00 26 12
> SDR record ID : 0x0032
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 65
> Sensor ID : temp SAS (0x65)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 40 (+/- 0) degrees C
> Status : Upper Non-Critical
> Upper critical : 55.000
> Upper non-critical : 40.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr
> Settable Thresholds : unc ucr
> Threshold Read Mask : unc ucr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 65
> Assertion Events : lnc+ lcr+ lnr+ unc- unc+ ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 65
> Assertions Enabled : unc+ ucr+
> Deassertions Enabled : unc+ ucr+
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 33 00 00 05
> SDR record ID : 0x0033
> SDR record type : 0x01
> SDR record next : 0xffff
> SDR record bytes: 51
> Getting 33 bytes from SDR at offset 5
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 33 00 05 21
> Getting 18 bytes from SDR at offset 38
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x21
> OpenIPMI Request Message Data (6 bytes)
> 16 00 33 00 26 12
> SDR record ID : 0x0033
> Bridge to Sensor Intf my/0x9c tgt/0:0 Sdr tgt/0x9c:0
>
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2d
> OpenIPMI Request Message Data (1 bytes)
> 66
> Sensor ID : temp ETH (0x66)
> Entity ID : 192.96 (PICMG Rear Transition Module)
> Sensor Type (Threshold) : Temperature (0x01)
> Sensor Reading : 36 (+/- 0) degrees C
> Status : ok
> Upper critical : 55.000
> Upper non-critical : 40.000
> Positive Hysteresis : 2.000
> Negative Hysteresis : 2.000
> Minimum sensor range : -40.000
> Maximum sensor range : 125.000
> Event Message Control : Per-threshold
> Readable Thresholds : unc ucr
> Settable Thresholds : unc ucr
> Threshold Read Mask : unc ucr
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x2b
> OpenIPMI Request Message Data (1 bytes)
> 66
> Assertion Events : lnc+ lcr+ lnr+ unc- ucr- unr-
> OpenIPMI Request Message Header:
> netfn = 0x4
> cmd = 0x29
> OpenIPMI Request Message Data (1 bytes)
> 66
> Assertions Enabled : unc+ ucr+
> Deassertions Enabled : unc+ ucr+
>
> address@hidden: ~]#
>
>
>
> Best regards,
> Sunkyu, KIM
>
> Team Manager | Customer Support Team 1
> T +82-2-3775-8668 | F +82-2-704-3395 | M +82-10-6700-4546
> NateON address@hidden | E.Mail address@hidden
>
> Xrosgen lnc. | 810/811 B dong , 583, Yangcheon-ro, Gangseo-gu, Seoul,
> 157-779, Korea
>
>
>
>
>
> ----- Original Message -----
> From : Albert Chu <address@hidden>
> To : Xrosgen/김순규 <address@hidden>
> Cc : address@hidden
> Sent : 2014-11-04 08:47:13
> Subject : Re: [Freeipmi-users] [FW][RE]RE: I would appreciate any
> adviceonhow totroubleshootthisissue.(ipmi_sdr_cache_create: internal
> IPMI error)
>
>
> I think I have an idea of what your motherboard is actually doing now.
> It's not typical. Could you send me the output of.
>
> /usr/sbin/bmc-info --get-device-id
>
> If possible, the output of
>
> ipmitool sdr list -vvv
>
> would be useful to confirm what I'm thinking.
>
> Al
>
> On Mon, 2014-11-03 at 10:38 -0800, Albert Chu wrote:
> > Your motherboard doesn't seem to support "reserve SDR Repository"
> > either. Again, it is mandatory, per IPMI 2.0 spec section 33.7 table
> > 33-2.
> >
> > I'll try to add another workaround.
> >
> > Al
> >
> > On Sun, 2014-11-02 at 13:12 +0900, Xrosgen/김순규 wrote:
> > > Hi, Al
> > >
> > >
> > >
> > > Check the below
> > >
> > >
> > >
> > > address@hidden: ~/freeipmi]# ipmi-sensors/ipmi-sensors
> -W
> > > nosdrinfo --debug
> > >
> > > Caching SDR repository
> > > information: /root/.freeipmi/sdr-cache/sdr-cache-fw.localhost
> > >
> > > =====================================================
> > >
> > > Reserve SDR Repository Request
> > >
> > > =====================================================
> > >
> > > [ 22h] = cmd[ 8b]
> > >
> > > =====================================================
> > >
> > > Reserve SDR Repository Response
> > >
> > > =====================================================
> > >
> > > [ 22h] = cmd[ 8b]
> > >
> > > [ C1h] = comp_code[ 8b]
> > >
> > > ipmi_sdr_cache_create: internal IPMI error
> > >
> > > address@hidden: ~/freeipmi]#
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Sunkyu, Kim
> > >
> > >
> > >
> > >
> > > Team Manager | Customer Support Team 1
> > >
> > > T +82-2-3775-8668 | F +82-2-704-3395 | M +82-10-6700-4546
> > > NateON address@hidden | E.Mail address@hidden
> > >
> > > Xrosgen lnc. | 810/811 B dong , 583, Yangcheon-ro, Gangseo-gu,
> Seoul,
> > > 157-779, Korea
> > >
> > >
> > >
> > >
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
>
>
>
>
--
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory
- Re: [Freeipmi-devel] [RE]Re: [Freeipmi-users] [FW][RE]RE: I would appreciate any adviceonhow totroubleshootthisissue.(ipmi_sdr_cache_create: internal IPMI error),
Albert Chu <=