Re: [Freeipmi-devel] HP Proliant DL360 G4

[Albert Chu]

Hey Kenneth,

Your previous ipmi-locate couldn't find an IPMI interface, so if it
doesn't have IPMI, that very well may be the case (the outputs at the
end of ipmi-locate are just default values).

Al

On Wed, 2010-09-15 at 13:40 -0700, Kenneth Stailey wrote:
> I updated the BIOS and iLO to the current versions.
> 
> I'm not sure if the system has IPMI or not.
> 
> It has some hardware monitoring thing from HP
> 
> $ lspci -d "0e11:b203"
> 01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out 
> Controller (rev 01)
> 
> sudo hpasmcli -s 'show POWERSUPPLY'
> 
> Power supply #1
>       Present  : Yes
>       Redundant: No
>       Condition: Ok
>       Hotplug  : Supported
> Power supply #2
>       Power Supply not present
> 
> I'll keep digging.
> 
> 
> --- On Wed, 9/15/10, Albert Chu <address@hidden> wrote:
> 
> > From: Albert Chu <address@hidden>
> > Subject: Re: [Freeipmi-devel] HP Proliant DL360 G4
> > To: "Kenneth Stailey" <address@hidden>
> > Cc: "address@hidden" <address@hidden>
> > Date: Wednesday, September 15, 2010, 1:37 PM
> > Hey Kenneth,
> > 
> > Appears this is different than the other system.  Does
> > it work with the
> > IPMI kernel driver?  Could you compile w/
> > --enable-debug and
> > --enable-trace to try and get more info.
> > 
> > The "internal error" message is bad.  Indicates that
> > something is not
> > implemented properly IPMI wise (could me FreeIPMI, could be
> > the
> > motherboard).
> > 
> > Al
> > 
> > On Wed, 2010-09-15 at 06:35 -0700, Kenneth Stailey wrote:
> > > $ echo `sudo dmidecode -s system-manufacturer ; sudo
> > dmidecode -s system-product-name`
> > > HP ProLiant DL360 G4
> > > 
> > > $ lsb_release -ds
> > > Ubuntu 10.04.1 LTS
> > > 
> > > $ uname -srvm
> > > Linux 2.6.32-24-server #42-Ubuntu SMP Fri Aug 20
> > 15:38:55 UTC 2010 x86_64
> > > 
> > > 
> > > $ ipmi-sensors --version
> > > ipmi-sensors - 0.8.9
> > > Copyright (C) 2003-2010 FreeIPMI Core Team
> > > This program is free software; you may redistribute it
> > under the terms of
> > > the GNU General Public License.  This program has
> > absolutely no warranty.
> > > 
> > > 
> > > address@hidden:~$ sudo ipmi-locate | less
> > > Probing KCS device using DMIDECODE... FAILED
> > > 
> > > Probing SMIC device using DMIDECODE... FAILED
> > > 
> > > Probing BT device using DMIDECODE... FAILED
> > > 
> > > Probing SSIF device using DMIDECODE... FAILED
> > > 
> > > Probing KCS device using SMBIOS... FAILED
> > > 
> > > Probing SMIC device using SMBIOS... FAILED
> > > 
> > > Probing BT device using SMBIOS... FAILED
> > > 
> > > Probing SSIF device using SMBIOS... FAILED
> > > 
> > > Probing KCS device using ACPI... FAILED
> > > 
> > > Probing SMIC device using ACPI... FAILED
> > > 
> > > Probing BT device using ACPI... FAILED
> > > 
> > > Probing SSIF device using ACPI... FAILED
> > > 
> > > Probing KCS device using PCI... FAILED
> > > 
> > > Probing SMIC device using PCI... FAILED
> > > 
> > > Probing BT device using PCI... FAILED
> > > 
> > > Probing SSIF device using PCI... FAILED
> > > 
> > > KCS device default values:
> > > IPMI Version: 1.5
> > > IPMI locate driver: DEFAULT
> > > IPMI interface: KCS
> > > BMC driver device:
> > > BMC I/O base address: 0xCA2
> > > Register spacing: 1
> > > 
> > > SMIC device default values:
> > > IPMI Version: 1.5
> > > IPMI locate driver: DEFAULT
> > > IPMI interface: SMIC
> > > BMC driver device:
> > > BMC I/O base address: 0xCA9
> > > Register spacing: 1
> > > 
> > > BT device default values:
> > > SSIF device default values:
> > > IPMI Version: 1.5
> > > IPMI locate driver: DEFAULT
> > > IPMI interface: SSIF
> > > BMC driver device: /dev/i2c-0
> > > BMC SMBUS slave address: 0x42
> > > Register spacing: 1
> > > 
> > > $ sudo ipmi-sensors -D KCS --disable-auto-probe
> > --driver-address=0xCA2 --register-spacing=1 --debug
> > > Caching SDR repository information:
> > /root/.freeipmi/sdr-cache/sdr-cache-ruthenium.localhost
> > > =====================================================
> > > Get SDR Repository Info Request
> > > =====================================================
> > > KCS Header:
> > > ------------
> > > [           
> >    0h] = lun[ 2b]
> > > [           
> >    Ah] = net_fn[ 6b]
> > > IPMI Command Data:
> > > ------------------
> > > [              20h]
> > = cmd[ 8b]
> > > ipmi_sdr_cache_create: internal IPMI error
> > > 
> > > 
> > > 
> > > _______________________________________________
> > > Freeipmi-devel mailing list
> > > address@hidden
> > > http://BLOCKEDBLOCKEDlists.gnu.org/mailman/listinfo/freeipmi-devel
> > > 
> > -- 
> > Albert Chu
> > address@hidden
> > Computer Scientist
> > High Performance Systems Division
> > Lawrence Livermore National Laboratory
> > 
> > 
> 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory