RE: [Freeipmi-devel] Intel SR2500 ipmi-sensors

[Viet Le]

Hi Andy,

Can you help me with steps for disabling the Chassis Intrusion SDR ?

Thanks

> -----Original Message-----
> From: Andy Cress [mailto:address@hidden
> Sent: Wednesday, September 01, 2010 4:43 PM
> To: Albert Chu; Viet Le
> Cc: address@hidden
> Subject: RE: [Freeipmi-devel] Intel SR2500 ipmi-sensors
> 
> Perhaps there is an issue between the Ethernet firmware and the BMC
> firmware.
> You would need to give the versions of both to Intel for analysis.
> It is also possible that the Intel FRUSDR configuration applied is
> incorrect for that sensor.  The Chassis Intrusion SDR can be disabled
> as
> a workaround.
> 
> Andy
> 
> -----Original Message-----
> From: address@hidden
> [mailto:address@hidden
> On
> Behalf Of Albert Chu
> Sent: Wednesday, September 01, 2010 4:06 PM
> To: Viet Le
> Cc: address@hidden
> Subject: RE: [Freeipmi-devel] Intel SR2500 ipmi-sensors
> 
> Hey Viet,
> 
> Without anything else to go on, it is certainly possible there is a bug
> in your system.  Have you filed a bug w/ Intel or the appropriate
> vendor?
> 
> Al
> 
> On Wed, 2010-09-01 at 11:35 -0700, Viet Le wrote:
> >
> > > -----Original Message-----
> > > From: address@hidden
> [mailto:freeipmi-
> > > address@hidden On Behalf Of Anand Babu
> > > Periasamy
> > > Sent: Tuesday, August 31, 2010 9:06 PM
> > > To: address@hidden
> > > Subject: Re: [Freeipmi-devel] Intel SR2500 ipmi-sensors
> > >
> > > On 08/31/2010 01:09 PM, Andy Cress wrote:
> > > > Somebody unplugged the NIC cable.
> > > >
> > > > Andy
> > > >
> > > > *From:*
> address@hidden
> > > >
> [mailto:address@hidden
> > > > *On Behalf Of *Viet Le
> > > > *Sent:* Tuesday, August 31, 2010 3:41 PM
> > > > *To:* address@hidden
> > > > *Subject:* [Freeipmi-devel] Intel SR2500 ipmi-sensors
> > > >
> > > > Hello:
> > > >
> > > > The ipmi-sensors tool is giving me the following reading:
> > > >
> > > > "38: Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost
> > > > (system is unplugged from LAN)]"
> > > >
> > > > I am asked if as what does it mean and if there is a way to
> change
> it
> > > to OK.
> > > >
> > > > I would appreciate any helps.
> > >
> > > It cloud mean unplugged network cable or chassis intrusion switch
> on.
> > > There is a tiny
> > > switch that turns on if you open the chassis cover. It typically
> looks
> > > like a press-button
> > > type switch beneath the cover.
> > >
> >
> > Hello All:
> >
> > Tested with lab unit, and see the following:
> >
> > 1. Unplugged the LAN cable, get the following error:
> > Physical Scrty (Platform Chassis Intrusion): [LAN Leash Lost (system
> is unplugged from LAN)]"
> >
> > 2. Open the chassis cover:
> > Physical Scrty (Platform Chassis Intrusion): [General Chassis
> Intrusion]
> >
> > So the original messages asked was indicating that the LAN cable is
> unplugged.
> >
> > The problem is: the LAN cable is indeed connected:
> >
> > Network Interface Parameter Configuration(ifconfig -a)
> >
> > em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> >     options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
> >     inet6 fe80::215:17ff:fede:8910%em0 prefixlen 64 scopeid 0x1
> >     inet x.x.x.x netmask 0xffffffc0 broadcast x.x.x.x
> >     ether 00:15:17:de:89:10
> >     media: Ethernet autoselect (100baseTX <full-duplex>)
> >     status: active
> > em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> >     options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
> >     ether 00:15:17:de:89:11
> >     media: Ethernet autoselect
> >     status: no carrier
> >
> > Are there any other cases that cause this issue ?
> >
> > Thanks
> > Viet
> >
> >
> >
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > http://*lists.gnu.org/mailman/listinfo/freeipmi-devel
> >
> --
> Albert Chu
> address@hidden
> Computer Scientist
> High Performance Systems Division
> Lawrence Livermore National Laboratory
> 
> 
> _______________________________________________
> Freeipmi-devel mailing list
> address@hidden
> http://lists.gnu.org/mailman/listinfo/freeipmi-devel