Re: [Freeipmi-devel] FreeIPMI 0.8.0 Beta3 - Feedback Request

[Al Chu]

I've put up a beta4 release.

http://ftp.gluster.com/pub/freeipmi/qa-release/freeipmi-0.8.0.beta4.tar.gz

Changes from beta 3:

Support option based workarounds in workarounds flag (i.e. --skip-checks
can also be specified as -W skipchecks in ipmi-fru).

Several minor bug fixes.

Al

On Fri, 2009-10-23 at 10:06 -0700, Al Chu wrote:
> I've put up a beta3 release.
> 
> http://ftp.gluster.com/pub/freeipmi/qa-release/freeipmi-0.8.0.beta3.tar.gz
> 
> Changes from beta 2:
> 
> Fixed portability issues for netbsd.
> 
> Fixed some config file bugs.
> 
> Fixed some OEM-isms.
> 
> Al
> 
> On Tue, 2009-10-13 at 14:44 -0700, Al Chu wrote:
> > Hi everyone,
> > 
> > I've put up a beta2 release here:
> > 
> > http://ftp.gluster.com/pub/freeipmi/qa-release/freeipmi-0.8.0.beta2.tar.gz
> > 
> > Changes from beta 1:
> > 
> > I've modified the ipmi-sel output so there are only 2 levels of
> > verbosity (former level 1 verbosity is now default).
> > 
> > Fixed some output corner cases.
> > 
> > Added --tail to ipmi-sel.
> > 
> > Fixed a shared sensors corner case.
> > 
> > Al
> > 
> > On Mon, 2009-10-05 at 13:35 -0700, Al Chu wrote:
> > > Hi everyone,
> > > 
> > > I've put up a beta release of FreeIPMI 0.8.1.beta1 here:
> > > 
> > > http://ftp.gluster.com/pub/freeipmi/qa-release/freeipmi-0.8.0.beta1.tar.gz
> > > 
> > > I'd appreciate any testing, input, etc. from people.  There are a few
> > > feature changes that I would like to get some input on.  I am open to
> > > changing, reverting, or adjusting based on user input.  Attached to the
> > > e-mail is the official NEWS release that lists all the changes in
> > > glorious detail.
> > > 
> > > New ipmi-sensors/ipmi-sel/ipmimonitoring default output:
> > > --------------------------------------------------------
> > > 
> > > The default output of ipmi-sensors, ipmi-sel, and ipmimonitoring has
> > > been modified for easier readability and consistency to each other.
> > > Some information is not output but by default anymore and is available
> > > through new options or increased verbosity.  A variety of new options
> > > are available for alternate outputs too.
> > > 
> > > A) Do people like the new output format?  Is it easier to read (which is
> > > my primary goal)?
> > > 
> > > B) Are there any options like --entity-sensor-names,
> > > --no-sensor-type-output, --non-abbreviated-units, etc. that people think
> > > should be default rather than an option?
> > > 
> > > C) Is there an output that should be default instead, or have an option
> > > to give an alternate output?
> > > 
> > > D) Does the --legacy-output option not fully maintain backwards
> > > compatability and break anybody's scripts??
> > > 
> > > Things I would appreciate testing on
> > > ------------------------------------
> > > 
> > > I'd appreciate people trying them out on their systems to make sure
> > > everything still outputs fine and I make any new corner cases.  I'm
> > > particularly interested in ensuring I didn't break:
> > > 
> > > A) The --bridge-sensors options on ipmi-sensors and ipmimonitoring
> > > 
> > > B) Multirecords outputs on ipmi-fru.
> > > 
> > > C) Workarounds, most notably the Intel workarounds
> > > 
> > > D) The new ipmi-dcmi tool, which I have not been able to fully vet due
> > > to lack of a system.
> > > 
> > > Any feedback would be appreciated before I release.
> > > 
> > > Thanks,
> > > Al
> > > 
> > > 
> > > _______________________________________________
> > > Freeipmi-devel mailing list
> > > address@hidden
> > > http://lists.gnu.org/mailman/listinfo/freeipmi-devel
> > 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory