Re: [Freeipmi-devel] Another "bad completion code" - D5h

[Al Chu]

Hey Kenneth,

I got a beta tar.gz with a workaround for this error code.  Can you give
it a shot and lemme know it works.

http://ftp.zresearch.com/pub/freeipmi/qa-release/freeipmi-0.7.11.beta0.tar.gz

Thanks,

Al

On Tue, 2009-06-30 at 09:30 -0700, Al Chu wrote:
> Hey Kenneth,
> 
> Sure looks like it.  I'll try and get you a beta tar.gz later today
> (finishing up something else right now) to try out.
> 
> Al
> 
> On Mon, 2009-06-29 at 16:39 -0700, Kenneth Stailey wrote:
> > Hi Al,
> > 
> > This time:
> > 
> > Sun Fire X4450 w/ELOM 3.0.0 running Ubuntu Jaunty 9.04
> > 
> > Kernel 2.6.28-13
> > 
> > FreeIPMI 0.7.10
> > 
> > $ sudo ipmi-sensors -D open --debug
> > 
> > ... skip 54 working sensors ...
> > 
> > =====================================================
> > Get Sensor Reading Request
> > =====================================================
> > [              2Dh] = cmd[ 8b]
> > [              7Ch] = sensor_number[ 8b]
> > =====================================================
> > Get Sensor Reading Response
> > =====================================================
> > [              2Dh] = cmd[ 8b]
> > [              D5h] = comp_code[ 8b]
> > [               0h] = sensor_reading[ 8b]
> > [               0h] = reserved1[ 5b]
> > [               1h] = reading_state[ 1b]
> > [               0h] = sensor_scanning[ 1b]
> > [               1h] = all_event_messages[ 1b]
> > [               1h] = sensor_event_bitmask1[ 8b]
> > [               0h] = sensor_event_bitmask2[ 7b]
> > [               0h] = reserved2[ 1b]
> > ipmi_cmd_get_sensor_reading: bad completion code: request data/parameter 
> > invalid
> > 
> > Thanks,
> > Kenneth
> > 
> > 
> > 
> > _______________________________________________
> > Freeipmi-devel mailing list
> > address@hidden
> > http://  lists.gnu.org/mailman/listinfo/freeipmi-devel
> > 
-- 
Albert Chu
address@hidden
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory