Re: [Freeipmi-devel] ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error

[Al Chu]

Hey David,

> scanner2 ~ #  ipmimonitoring
> ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error

This is odd.  Could you run ipmimonitoring with --debug and let me know
the output?  I suppose I could have some weird corner case bug in
ipmimonitoring that doesn't exist in ipmi-sensors.

Al

On Tue, 2008-08-26 at 11:31 -0700, David Sparks wrote:
> Hi all,
> 
> Servers: Dell 1850, 1950.
> 
> I'm trying to get ipmimonitoring running and have hit a snag.  The manpage 
> suggests that ipmimonitoring provides different but similar output to 
> ipmi-sensors.  However ipmi-sensors works and ipmimonitoring doesn't.
> 
> I also noticed I always get an error running ipmiutil getevt or bmchealth.  I 
> don't see any Dell specific workarounds on the manpage (or the error either) 
> I'm using this for reference:
> 
> http://www.gnu.org/software/freeipmi/manpages/man8/ipmimonitoring.8.html
> 
> What else should I check?
> 
> Thanks!
> 
> 
> scanner2 ~ #  ipmimonitoring
> ipmi_monitoring_sensor_readings_by_record_id: internal IPMI error
> 
> scanner2 ~ # ipmiutil getevt
> ipmiutil ver 2.11
> getevent ver 2.11
> -- BMC version 1.7, IPMI version 1.5
> event receiver sa = 20 lun = 00
> bmc enables = 08
> Event Message Buffers not enabled.
> set_bmc_enables error 0xcc
> getevent: Invalid data field in request
> 
> scanner2 ~ # bmchealth
> ipmiutil ver 2.11
> bmchealth ver 2.11
> BMC version 1.7, IPMI version 1.5
> BMC manufacturer = 0002a2 (Dell), product = 0000
> Chassis Status   = 01   (on, restore_policy=stay_off)
> Power State      = 00   (S0: working)
> Selftest status  = 0055 (OK)
> get_chan_auth error: ret = cc
> bmchealth: Invalid data field in request
> 
> scanner2 ~ #  ipmi-sensors
> 1: Temp (Temperature): 50.00 C (NA/90.00): [OK]
> 2: Temp (Temperature): 47.00 C (NA/90.00): [OK]
> 3: Ambient Temp (Temperature): 16.00 C (5.00/47.00): [OK]
> 4: Planar Temp (Temperature): 37.00 C (5.00/72.00): [OK]
> 5: Riser Temp (Temperature): 40.00 C (5.00/67.00): [OK]
> 6: Temp (Temperature): 40.00 C (NA/NA): [OK]
> 7: Temp (Temperature): 40.00 C (NA/NA): [OK]
> 8: CMOS Battery (Voltage): 3.15 V (2.64/NA): [OK]
> 9: ROMB Battery (Voltage): [State Deasserted]
> 10: VCORE (Voltage): [State Deasserted]
> 11: VCORE (Voltage): [State Deasserted]
> 12: PROC VTT (Voltage): [Unknown]
> 13: 1.5V PG (Voltage): [Unknown]
> 14: 1.8V PG (Voltage): [Unknown]
> 15: 3.3V PG (Voltage): [Unknown]
> 16: 5V PG (Voltage): [Unknown]
> 17: 5V Riser PG (Voltage): [Unknown]
> 18: Riser PG (Voltage): [Unknown]
> 19: Presence (Entity Presence): [Entity Present]
> 20: Presence (Entity Presence): [Entity Present]
> 21: Presence (Entity Presence): [Entity Present]
> 22: Presence (Entity Presence): [Entity Present]
> 23: ROMB Presence (Entity Presence): [Entity Present]
> 24: FAN 1A RPM (Fan): 7425.00 RPM (2175.00/NA): [OK]
> 25: FAN 1B RPM (Fan): 5700.00 RPM (2175.00/NA): [OK]
> 26: FAN 2A RPM (Fan): 7725.00 RPM (2175.00/NA): [OK]
> 27: FAN 2B RPM (Fan): 5175.00 RPM (2175.00/NA): [OK]
> 28: FAN 3A RPM (Fan): 7725.00 RPM (2175.00/NA): [OK]
> 29: FAN 3B RPM (Fan): 5325.00 RPM (2175.00/NA): [OK]
> 30: FAN 4A RPM (Fan): 8025.00 RPM (2175.00/NA): [OK]
> 31: FAN 4B RPM (Fan): 5475.00 RPM (2175.00/NA): [OK]
> 32: Status (Processor): [Processor Presence detected]
> 33: Status (Processor): [Processor Presence detected]
> 34: Status (Power Supply): [Presence detected]
> 35: Status (Power Supply): [Presence detected]
> 36: VRM (Power Supply): [Presence detected]
> 37: VRM (Power Supply): [Presence detected]
> 38: OS Watchdog (Watchdog 2): [OK]
> 39: SEL (Event Logging Disabled): [Unknown]
> 40: Intrusion (Platform Chassis Intrusion): [OK]
> 41: PS Redundancy (Power Supply): [Unknown]
> 42: Fan Redundancy (Fan): [Unknown]
> 55: SCSI Connector  (Cable Interconnect): [Unknown]
> 56: Drive (Slot Connector): [Unknown]
> 57: ECC Corr Err (Memory): [Unknown]
> 58: ECC Uncorr Err (Memory): [Unknown]
> 59: I/O Channel Chk (Critical Interrupt): [Unknown]
> 60: PCI Parity Err (Critical Interrupt): [Unknown]
> 61: PCI System Err (Critical Interrupt): [Unknown]
> 62: SBE Log Disable (Event Logging Disabled): [Unknown]
> 63: Logging Disable (Event Logging Disabled): [Unknown]
> 64: Unknown (System Event): [Unknown]
> 65: CPU Protocol Er (Processor): [Unknown]
> 66: CPU Bus PERR (Processor): [Unknown]
> 67: CPU Init Err (Processor): [Unknown]
> 68: CPU Machine Chk (Processor): [Unknown]
> 69: Memory Spared (Memory): [Unknown]
> 70: Memory Mirrored (Memory): [Unknown]
> 71: Memory RAID (Memory): [Unknown]
> 72: Memory Added (Memory): [Unknown]
> 73: Memory Removed (Memory): [Unknown]
> 74: PCIE Fatal Err (Critical Interrupt): [Unknown]
> 75: Chipset Err (Critical Interrupt): [Unknown]
> 76: Err Reg Pointer (OEM Reserved): [Unknown]
> 
> 
> -------------------------------------------------------------------------
> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
> Build the coolest Linux based applications with Moblin SDK & win great prizes
> Grand prize is a trip for two to an Open Source event anywhere in the world
> http:// moblin-contest.org/redirect.php?banner_id=100&url=/
> _______________________________________________
> ipmiutil-developers mailing list
> address@hidden
> https:// lists.sourceforge.net/lists/listinfo/ipmiutil-developers
> 
-- 
Albert Chu
address@hidden
925-422-5311
Computer Scientist
High Performance Systems Division
Lawrence Livermore National Laboratory