[Freeipmi-devel] [bugs #8402] Sensor 52 causes kcs error in -vv

[Anand Babu]

This mail is an automated notification from the bugs tracker
 of the project: FreeIPMI.

/**************************************************************************/
[bugs #8402] Latest Modifications:

Changes by: 
                Anand Babu <address@hidden>
'Date: 
                Tue 04/06/04 at 00:43 (GMT)

            What     | Removed                   | Added
---------------------------------------------------------------------------
            Category | None                      | libfreeipmi
          Item Group | None                      | Improper Behaviour
          Resolution | None                      | Fixed
         Assigned to | None                      | ab
              Status | Open                      | Closed


------------------ Additional Follow-up Comments ----------------------------
"Expression Failed" message is not an indication of a failure. I turned them on 
purposely to evaluate if locking/synchronization affects the core. ERR 
conditions are handled at higher level properly.
                                                                                
            
Now added them under --enable-trace option to let developers watch the debug 
info. 







/**************************************************************************/
[bugs #8402] Full Item Snapshot:

URL: <http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8402>
Project: FreeIPMI
Submitted by: Joseph Ruscio
On: Thu 04/01/04 at 00:55

Category:  libfreeipmi
Severity:  5 - Average
Item Group:  Improper Behaviour
Resolution:  Fixed
Assigned to:  ab
Status:  Closed


Summary:  Sensor 52 causes kcs error in -vv

Original Submission:  Sensor 52 display causes a kcs error when -vv is 
specified. This also shows up in 'sensors -vv -g Temperature'

Record ID: 52
Sensor type: HSC SCSI BP Temp (Temperature)
Sensor number: #1
Event/Reading type code: 01h
Lower non-recoverable threshold: 0.00 Degrees C
Upper non-recoverable threshold: 0.00 Degrees C
Lower Critical threshold: 5.00 Degrees C
Upper Critical threshold: 43.00 Degrees C
Lower non-critical threshold: 10.00 Degrees C
Upper non-critical threshold: 39.00 Degrees C
Sensor min. reading: -128.00 Degrees C
Sensor max. reading: 127.00 Degrees C
Normal min.: 12.00 Degrees C
Nominal reading: 28.00 Degrees C
Normal max: 38.00 Degrees C
ipmi-kcs-interface.c: 494: ipmi_kcs_cmd: errno (16): expression failed
Sensor reading: N/A
Sensor status: FAILED

Follow-up Comments
------------------


-------------------------------------------------------
Date: Tue 04/06/04 at 00:43         By: ab
"Expression Failed" message is not an indication of a failure. I turned them on 
purposely to evaluate if locking/synchronization affects the core. ERR 
conditions are handled at higher level properly.
                                                                                
            
Now added them under --enable-trace option to let developers watch the debug 
info. 













For detailed info, follow this link:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8402>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/