[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Freeipmi-devel] libfreeipmi struct/pack(1) vs byte array
From: |
Anand Babu |
Subject: |
Re: [Freeipmi-devel] libfreeipmi struct/pack(1) vs byte array |
Date: |
Fri, 05 Dec 2003 13:09:59 -0800 |
User-agent: |
Gnus/5.1002 (Gnus v5.10.2) Emacs/21.3 (gnu/linux) |
Albert Chu <address@hidden> writes:
>> My doubt is,
>> marshall_pkt() will have no knowledge of member indices and bit fields
>> to pack them to a byte array.
>
> This is the major downside. Unless we go with a completely different
> structure approach, we have to program a whole bunch of "marshall" and
> "unmarshall" functions for each packet type.
Yes thats correct.
>> 1) Byte Ordering (Endianess)
>> As long as we align RMCP data to BIG-ENDIAN and IPMI data to
>> LITTLE-ENDIAN, this will not pose a problem.
>>
>> Byte ordering problem will happen only when the element is bigger than
>> a byte. We rarely use a double word element inside the structure. Most
>> of them are single byte or in bits. For the few elements we can have
>> macros to convert to the specified order.
>
> If we write macros to convert into the specified order within the
> assemble/unassemble function, aren't we just doing marshalling and
> unmarshalling?? :-)
Different kinds of computers use different conventions for the
ordering of bytes within a word. Some computers put the MS byte
within a word first (this is called "big-endian" order), and others
put it last ("little-endian" order).
Byte ordering (order of MS and LS bytes) and Byte alignment (aligning
to 8, 16, 32, ... byte boundaries) are 2 different issues. We need to
take care of both the issues irrespective of struct or marshalling.
#pragma pack(n) or byte array model takes care of only byte alignment.
In struct model:
The data type of the member will remain as word (u_int16_t) or
dword (u_int32_t). Macros will just swap the order of LS and MS bytes
based on the platform endianess. Take a look at endian.h and
bits/endian.h
In Marshalling:
The data type is a byte array, Even words or dwords are copied byte by
byte in the order dictated by the platform endianess.
>> 2) Byte Alignment - Currently the biggest problem.
>>
>> IPMI is different. The whole spec is carefully designed to be single
>> byte aligned. If you notice the reserved members, they are actually
>> structure pads used for alignment. They can also be used for future
>> expansions.
>
> I think we're getting some terminology confused here. When I talk about
> byte alignment problems, I'm talking about the following:
>
> #include <stdio.h>
> #include <stdlib.h>
> #include <sys/types.h>
>
> struct foo {
> u_int8_t a: 4;
> u_int8_t b: 4;
> };
>
> int main() {
> char one = 1;
> struct foo f;
> memcpy(&f, &one, 1);
>
> printf("a = %d b = %d\n", f.a, f.b);
> }
>
> Run on Linux IA32
> a = 1 b = 0
>
> Run on AIX PowerPC
> a = 0 b = 1
Without #pragma pack(1), I cannot predict if this is byte-alignment or
byte-ordering problem.
Can you do a sizeof (foo) under AIX and tell me?
> This is my concern. Although we have not found instances in which
> gcc aligns in a way we don't like, we have no guarantee that gcc
> will never go the other way (or perhaps we haven't found a structure
> "pattern" in which gcc wants to align a different way).
Think of the devil, it will come.
I'm already convinced to go to byte array model.
> My proposal is to do something like the following for FreeIPMI. Within
> the assemble_pkt function:
>
> if (first byte of cmd_buf == IPMI_GET_SESSION_CHALLENGE_CMD)
> marshall_get_session_challenge(cmd_buf, my_buf, buflen);
> else if (first byte of cmd_buf == IPMI_SESSION_PRIVILEGE_CMD)
> marshall_set_session_privilege(cmd_buf, my_buf, buflen);
>
> Then within marshall_foo() we something like:
>
> memcpy_int(buf, cmd->intval);
> memcpy_byte(buf, cmd->charval);
> memcpy_1bit(buf, cmd->1bitval);
>
> I haven't thought about the actual coding of the above yet, but you
> probably get the idea. We will hide endian issues within the memcpy_int
> functions.
>
> unassemble_pkt will be similar, but just opposite.
I will post a libfreeipmi byte-array model reference code before I
begin my work, in a separate email thread.
+--------------------------+
| BYTE-ARRAY TEAM WINS |
| Thanks to Ben, Al, Ian. |
+--------------------------+
--
_.|_
(_||_)
Free as in Freedom <www.gnu.org>