[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ff3d-users] how to use an external mesh
From: |
Stephane Del Pino |
Subject: |
Re: [ff3d-users] how to use an external mesh |
Date: |
Thu, 19 Jan 2006 11:39:56 +0100 |
Pierre Michaud wrote:
> I have tried with a much finer mesh (>200000 tetrahedra), but I obtain
> the same wrong value
> as with the coarse mesh.
Ok. So this is a bug. I will have a look at it but I will be off-line
next week, so I cannot tell when it will be fixed.
> Actually, in the more complex (and asymetric) problems I am studying, I
> am using the fictitious domain method
> because my geometry is not a simple box, and I use the "extract" command
> to define boundaries.
When I was speaking of the symetry, I was speaking of the symetry of the
differential operators, not of the geometry. If the equation you are
solving is the same, you can definitly use a conjugate gradient ...
> I reach the memory limit during the initial phase, before the solver
> launches.
Yes, the geometry construction phase is quite consuming, this is true.
Thanks again for the report,
Regards,
Stephane.