Re: [O] Cleaning up my org setup, using version from git

[Thomas S. Dye]

Sorry, I didn't read closely.

Tom

Marcelo de Moraes Serpa <address@hidden> writes:

> Yes,
>
>
>> org git:(master): make autoloads
>> ======================================================
>> = Invoke "make help" for a synopsis of make targets. =
>> = Created a default local.mk template.               =
>> = Setting "oldorg" as the default target.            =
>> = Please adapt local.mk to your local setup!         =
>> ======================================================
>> End of file during parsing
>> make: [local.mk] Error 255 (ignored)
>> make -C lisp autoloads
>> rm -f org-version.el org-loaddefs.el org-version.elc org-loaddefs.elc
>> org-install.elc
>> org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> End of file during parsing
>> make[1]: *** [org-version.el] Error 255
>> make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <address@hidden> wrote:
>
>> Aloha Marcelo,
>>
>> Marcelo de Moraes Serpa <address@hidden> writes:
>>
>> > Hi Nick, thank you for the reply.
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> (OpenStep
>> > could not be found, by org-mac-protocol). Not loading that file solved
>> the
>> > issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> org-loaddefs.el
>> > can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be loaded?
>>
>> Did you `make autoloads'?
>>
>> Tom
>>
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <address@hidden>
>> wrote:
>> >
>> >> Marcelo de Moraes Serpa <address@hidden> wrote:
>> >>
>> >>
>> >> > I have org in ~/.emacs.d/vendor/org, and I also added the following
>> >> lines to my init.el:
>> >> >
>> >> > (add-to-list load-path (cons (concat dotfiles-dir "vendor/org/lisp")
>> >>  load-path))
>> >> > (add-to-list load-path (cons (concat dotfiles-dir
>> >> "vendor/org/contrib/lisp")  load-path))
>> >> >
>> >> > But it fails hard when emacs inits:
>> >> >
>> >> >     Warning (initialization): An error occurred while loading
>> >> `/Users/fullofcaffeine/.emacs.d/
>> >> >     init.el':
>> >> >     error: Autoloading failed to define function
>> >> org-babel-do-load-languages
>> >> >     To ensure normal operation, you should investigate and remove the
>> >> >     cause of the error in your initialization file.  Start Emacs with
>> >> >     the `--debug-init' option to view a complete error backtrace.
>> >> >
>> >> > When I try to "make autoloads" I get the following:
>> >> >
>> >> >     org git:(master): make autoloads
>> >> >     ======================================================
>> >> >     = Invoke "make help" for a synopsis of make targets. =
>> >> >     = Created a default local.mk template.               =
>> >> >     = Setting "oldorg" as the default target.            =
>> >> >     = Please adapt local.mk to your local setup!         =
>> >> >     ======================================================
>> >> >     End of file during parsing
>> >> >     make: [local.mk] Error 255 (ignored)
>> >> >     make -C lisp autoloads
>> >> >     rm -f org-version.el org-loaddefs.el org-version.elc
>> >> org-loaddefs.elc org-install.elc
>> >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >> >     End of file during parsing
>> >> >     make[1]: *** [org-version.el] Error 255
>> >> >     make: *** [autoloads] Error 2
>> >> >
>> >> > Not sure where to go from here.
>> >> >
>> >>
>> >> This
>> >>
>> >> >      Start Emacs with
>> >> >     the `--debug-init' option to view a complete error backtrace.
>> >>
>> >> would be a start. The "End of file during parsing" probably indicates
>> >> a missing paren or some such, possibly in init.el. I presume emacs -q
>> >> starts up properly?
>> >>
>> >> Nick
>> >>
>> >>
>> > Hi Nick, thank you for the reply.
>> >
>> >
>> > Happens it was an error specific to the terminal version of emacs
>> > (OpenStep could not be found, by org-mac-protocol). Not loading that
>> > file solved the issue.
>> >
>> > It looks like I just need to upgrade from org-remember to org-capture.
>> >
>> > However, I'm getting the following message when calling org-version:
>> >
>> > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>> > org-loaddefs.el can not be found!)
>> >
>> > What does org-loaddefs do and how could I get org-loaddefs to be
>> > loaded?
>> >
>> > Thanks!
>> >
>> > - Marcelo
>> >
>> >
>> > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos <address@hidden>
>> > wrote:
>> >
>> >
>> >     Marcelo de Moraes Serpa <address@hidden> wrote:
>> >
>> >
>> >     > I have org in ~/.emacs.d/vendor/org, and I also added the
>> >     following lines to my init.el:
>> >     >
>> >     > (add-to-list load-path (cons (concat dotfiles-dir
>> >     "vendor/org/lisp")  load-path))
>> >     > (add-to-list load-path (cons (concat dotfiles-dir
>> >     "vendor/org/contrib/lisp")  load-path))
>> >     >
>> >     > But it fails hard when emacs inits:
>> >     >
>> >     >     Warning (initialization): An error occurred while loading
>> >     `/Users/fullofcaffeine/.emacs.d/
>> >     >     init.el':
>> >     >     error: Autoloading failed to define function
>> >     org-babel-do-load-languages
>> >     >     To ensure normal operation, you should investigate and
>> >     remove the
>> >     >     cause of the error in your initialization file.  Start Emacs
>> >     with
>> >     >     the `--debug-init' option to view a complete error
>> >     backtrace.
>> >     >
>> >     > When I try to "make autoloads" I get the following:
>> >     >
>> >     >     org git:(master): make autoloads
>> >     >     ======================================================
>> >     >     = Invoke "make help" for a synopsis of make targets. =
>> >     >     = Created a default local.mk template.               =
>> >     >     = Setting "oldorg" as the default target.            =
>> >     >     = Please adapt local.mk to your local setup!         =
>> >     >     ======================================================
>> >     >     End of file during parsing
>> >     >     make: [local.mk] Error 255 (ignored)
>> >     >     make -C lisp autoloads
>> >     >     rm -f org-version.el org-loaddefs.el org-version.elc
>> >     org-loaddefs.elc org-install.elc
>> >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>> >     >     End of file during parsing
>> >     >     make[1]: *** [org-version.el] Error 255
>> >     >     make: *** [autoloads] Error 2
>> >     >
>> >     > Not sure where to go from here.
>> >     >
>> >
>> >
>> >     This
>> >
>> >
>> >     >      Start Emacs with
>> >     >     the `--debug-init' option to view a complete error
>> >     backtrace.
>> >
>> >
>> >     would be a start. The "End of file during parsing" probably
>> >     indicates
>> >     a missing paren or some such, possibly in init.el. I presume emacs
>> >     -q
>> >     starts up properly?
>> >
>> >     Nick
>> >
>> >
>> >
>>
>> --
>> Thomas S. Dye
>> http://www.tsdye.com
>>
>>
> Yes,
>
>
>
>     org git:(master): make autoloads
>     ======================================================
>     = Invoke "make help" for a synopsis of make targets. =
>     = Created a default local.mk template.               =
>     = Setting "oldorg" as the default target.            =
>     = Please adapt local.mk to your local setup!         =
>     ======================================================
>     End of file during parsing
>     make: [local.mk] Error 255 (ignored)
>     make -C lisp autoloads
>     rm -f org-version.el org-loaddefs.el org-version.elc
>     org-loaddefs.elc org-install.elc
>     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     End of file during parsing
>     make[1]: *** [org-version.el] Error 255
>     make: *** [autoloads] Error 2
>
>
>
>
>
> On Fri, Mar 22, 2013 at 3:35 PM, Thomas S. Dye <address@hidden> wrote:
>
>     Aloha Marcelo,
>     
>     
>     Marcelo de Moraes Serpa <address@hidden> writes:
>     
>     > Hi Nick, thank you for the reply.
>     >
>     > Happens it was an error specific to the terminal version of
>     emacs (OpenStep
>     > could not be found, by org-mac-protocol). Not loading that file
>     solved the
>     > issue.
>     >
>     > It looks like I just need to upgrade from org-remember to
>     org-capture.
>     >
>     > However, I'm getting the following message when calling
>     org-version:
>     >
>     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>     org-loaddefs.el
>     > can not be found!)
>     >
>     > What does org-loaddefs do and how could I get org-loaddefs to be
>     loaded?
>     
>     
>     Did you `make autoloads'?
>     
>     Tom
>     
>     
>     
>     >
>     > Thanks!
>     >
>     > - Marcelo
>     >
>     >
>     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
>     <address@hidden> wrote:
>     >
>     >> Marcelo de Moraes Serpa <address@hidden> wrote:
>     >>
>     >>
>     >> > I have org in ~/.emacs.d/vendor/org, and I also added the
>     following
>     >> lines to my init.el:
>     >> >
>     >> > (add-to-list load-path (cons (concat dotfiles-dir
>     "vendor/org/lisp")
>     >>  load-path))
>     >> > (add-to-list load-path (cons (concat dotfiles-dir
>     >> "vendor/org/contrib/lisp")  load-path))
>     >> >
>     >> > But it fails hard when emacs inits:
>     >> >
>     >> >     Warning (initialization): An error occurred while loading
>     >> `/Users/fullofcaffeine/.emacs.d/
>     >> >     init.el':
>     >> >     error: Autoloading failed to define function
>     >> org-babel-do-load-languages
>     >> >     To ensure normal operation, you should investigate and
>     remove the
>     >> >     cause of the error in your initialization file.  Start
>     Emacs with
>     >> >     the `--debug-init' option to view a complete error
>     backtrace.
>     >> >
>     >> > When I try to "make autoloads" I get the following:
>     >> >
>     >> >     org git:(master): make autoloads
>     >> >     ======================================================
>     >> >     = Invoke "make help" for a synopsis of make targets. =
>     >> >     = Created a default local.mk template.               =
>     >> >     = Setting "oldorg" as the default target.            =
>     >> >     = Please adapt local.mk to your local setup!         =
>     >> >     ======================================================
>     >> >     End of file during parsing
>     >> >     make: [local.mk] Error 255 (ignored)
>     >> >     make -C lisp autoloads
>     >> >     rm -f org-version.el org-loaddefs.el org-version.elc
>     >> org-loaddefs.elc org-install.elc
>     >> >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     >> >     End of file during parsing
>     >> >     make[1]: *** [org-version.el] Error 255
>     >> >     make: *** [autoloads] Error 2
>     >> >
>     >> > Not sure where to go from here.
>     >> >
>     >>
>     >> This
>     >>
>     >> >      Start Emacs with
>     >> >     the `--debug-init' option to view a complete error
>     backtrace.
>     >>
>     >> would be a start. The "End of file during parsing" probably
>     indicates
>     >> a missing paren or some such, possibly in init.el. I presume
>     emacs -q
>     >> starts up properly?
>     >>
>     >> Nick
>     >>
>     >>
>     > Hi Nick, thank you for the reply.
>     >
>     >
>     > Happens it was an error specific to the terminal version of
>     emacs
>     > (OpenStep could not be found, by org-mac-protocol). Not loading
>     that
>     > file solved the issue.
>     >
>     > It looks like I just need to upgrade from org-remember to
>     org-capture.
>     >
>     > However, I'm getting the following message when calling
>     org-version:
>     >
>     > Org-mode version 8.0-pre (release_8.0-pre-150-g412d98-git @
>     > org-loaddefs.el can not be found!)
>     >
>     > What does org-loaddefs do and how could I get org-loaddefs to be
>     > loaded?
>     >
>     > Thanks!
>     >
>     > - Marcelo
>     >  
>     >
>     > On Fri, Mar 22, 2013 at 3:02 PM, Nick Dokos
>     <address@hidden>
>     > wrote:
>     >
>     >
>     >     Marcelo de Moraes Serpa <address@hidden> wrote:
>     >
>     >
>     >     > I have org in ~/.emacs.d/vendor/org, and I also added the
>     >     following lines to my init.el:
>     >     >
>     >     > (add-to-list load-path (cons (concat dotfiles-dir
>     >     "vendor/org/lisp")  load-path))
>     >     > (add-to-list load-path (cons (concat dotfiles-dir
>     >     "vendor/org/contrib/lisp")  load-path))
>     >     >
>     >     > But it fails hard when emacs inits:
>     >     >
>     >     >     Warning (initialization): An error occurred while
>     loading
>     >     `/Users/fullofcaffeine/.emacs.d/
>     >     >     init.el':
>     >     >     error: Autoloading failed to define function
>     >     org-babel-do-load-languages
>     >     >     To ensure normal operation, you should investigate and
>     >     remove the
>     >     >     cause of the error in your initialization file.  Start
>     Emacs
>     >     with
>     >     >     the `--debug-init' option to view a complete error
>     >     backtrace.
>     >     >
>     >     > When I try to "make autoloads" I get the following:
>     >     >
>     >     >     org git:(master): make autoloads
>     >     >     ======================================================
>     >     >     = Invoke "make help" for a synopsis of make targets. =
>     >     >     = Created a default local.mk template.               =
>     >     >     = Setting "oldorg" as the default target.            =
>     >     >     = Please adapt local.mk to your local setup!         =
>     >     >     ======================================================
>     >     >     End of file during parsing
>     >     >     make: [local.mk] Error 255 (ignored)
>     >     >     make -C lisp autoloads
>     >     >     rm -f org-version.el org-loaddefs.el org-version.elc
>     >     org-loaddefs.elc org-install.elc
>     >     >     org-version: 8.0-pre (release_8.0-pre-150-g412d98)
>     >     >     End of file during parsing
>     >     >     make[1]: *** [org-version.el] Error 255
>     >     >     make: *** [autoloads] Error 2
>     >     >
>     >     > Not sure where to go from here. 
>     >     >
>     >
>     >
>     >     This
>     >
>     >
>     >     >      Start Emacs with
>     >     >     the `--debug-init' option to view a complete error
>     >     backtrace.
>     >
>     >
>     >     would be a start. The "End of file during parsing" probably
>     >     indicates
>     >     a missing paren or some such, possibly in init.el. I presume
>     emacs
>     >     -q
>     >     starts up properly?
>     >
>     >     Nick
>     >
>     >
>     >
>     
>     
>     --
>     Thomas S. Dye
>     http://www.tsdye.com
>     
>     
>

-- 
Thomas S. Dye
http://www.tsdye.com