emacs-orgmode
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Orgmode] [PATCH] Apply patch for hour/minute repeater support


From: Manish
Subject: Re: [Orgmode] [PATCH] Apply patch for hour/minute repeater support
Date: Wed, 22 Sep 2010 10:17:12 +0530

Hello Andrew,

I copied the diff from "---" to the version number at the end of the
diff to a file and ran a "git apply <patch file>" while on a local
branch. It fails with "fatal: corrupt patch at line 12" which is:

,----
| @cindex timestamp, with repeater interval
`----

Any clues what I could be doing wrong?

Thanks
-- 
Manish


On Tue, Sep 21, 2010 at 6:16 PM, Carsten Dominik wrote:
> Hi everyone,
>
> do we have any volunteers who are willing to test this patch?
>
> Thanks.
>
> - Carsten
>
> On Sep 14, 2010, at 7:06 PM, Andrew J. Korty wrote:
>
>> This patch adds hour and minute granularity to repeaters.  Let me know if
>> there's interest in incorporating it, and I'll start the FSF paperwork
>> process.
>>
>> Andrew Korty
>>
>> ---
>> doc/org.texi       |    4 ++--
>> lisp/org-agenda.el |    2 +-
>> lisp/org.el        |   27 +++++++++++++++------------
>> 3 files changed, 18 insertions(+), 15 deletions(-)
>>
>> diff --git a/doc/org.texi b/doc/org.texi
>> index d6ea141..e9ede5a 100644
>> --- a/doc/org.texi
>> +++ b/doc/org.texi
>> @@ -5006,8 +5006,8 @@ plain timestamp will be shown exactly on that date.
>> @cindex timestamp, with repeater interval
>> A timestamp may contain a @emph{repeater interval}, indicating that it
>> applies not only on the given date, but again and again after a certain
>> -interval of N days (d), weeks (w), months (m), or years (y).  The
>> -following will show up in the agenda every Wednesday:
>> +interval of N minutes(M), hours(H), days (d), weeks (w), months (m), or
>> +years (y).  The following will show up in the agenda every Wednesday:
>> @example
>> * Pick up Sam at school <2007-05-16 Wed 12:30 +1w>
>> diff --git a/lisp/org-agenda.el b/lisp/org-agenda.el
>> index 9f94fa6..176c8f0 100644
>> --- a/lisp/org-agenda.el
>> +++ b/lisp/org-agenda.el
>> @@ -4385,7 +4385,7 @@ the documentation of `org-diary'."
>>              (apply 'encode-time  ; DATE bound by calendar
>>                     (list 0 0 0 (nth 1 date) (car date) (nth 2 date))))
>>             1 11))
>> -          "\\|\\(<[0-9]+-[0-9]+-[0-9]+[^>\n]+?\\+[0-9]+[dwmy]>\\)"
>> +          "\\|\\(<[0-9]+-[0-9]+-[0-9]+[^>\n]+?\\+[0-9]+[MHdwmy]>\\)"
>>           "\\|\\(<%%\\(([^>\n]+)\\)>\\)"))
>>         marker hdmarker deadlinep scheduledp clockp closedp inactivep
>>         donep tmp priority category ee txt timestr tags b0 b3 e3 head
>> diff --git a/lisp/org.el b/lisp/org.el
>> index 70dd482..ace8291 100644
>> --- a/lisp/org.el
>> +++ b/lisp/org.el
>> @@ -621,7 +621,7 @@ An entry can be toggled between QUOTE and normal with
>>  :type 'string)
>> (defconst org-repeat-re
>> -  "<[0-9]\\{4\\}-[0-9][0-9]-[0-9][0-9]
>> [^>\n]*?\\([.+]?\\+[0-9]+[dwmy]\\(/[0-9]+[dwmy]\\)?\\)"
>> +  "<[0-9]\\{4\\}-[0-9][0-9]-[0-9][0-9]
>> [^>\n]*?\\([.+]?\\+[0-9]+[MHdwmy]\\(/[0-9]+[dwmy]\\)?\\)"
>>  "Regular expression for specifying repeated events.
>> After a match, group 1 contains the repeat expression.")
>> @@ -11392,7 +11392,8 @@ This function is run automatically after each
>> state change to a DONE state."
>>         (aa (assoc last-state org-todo-kwd-alist))
>>         (interpret (nth 1 aa))
>>         (head (nth 2 aa))
>> -        (whata '(("d" . day) ("m" . month) ("y" . year)))
>> +        (whata '(("M" . minute) ("H" . hour) ("d" . day) ("m" . month)
>> +                  ("y" . year)))
>>         (msg "Entry repeats: ")
>>         (org-log-done nil)
>>         (org-todo-log-states nil)
>> @@ -11429,7 +11430,7 @@ This function is run automatically after each
>> state change to a DONE state."
>>        (setq type (if (match-end 1) org-scheduled-string
>>                     (if (match-end 3) org-deadline-string "Plain:"))
>>              ts (match-string (if (match-end 2) 2 (if (match-end 4) 4
>> 0))))
>> -       (when (string-match "\\([.+]\\)?\\(\\+[0-9]+\\)\\([dwmy]\\)" ts)
>> +       (when (string-match "\\([.+]\\)?\\(\\+[0-9]+\\)\\([MHdwmy]\\)" ts)
>>          (setq n (string-to-number (match-string 2 ts))
>>                what (match-string 3 ts))
>>          (if (equal what "w") (setq n (* n 7) what "d"))
>> @@ -11438,13 +11439,15 @@ This function is run automatically after each
>> state change to a DONE state."
>>            (setq time (save-match-data (org-time-string-to-time ts)))
>>            (cond
>>             ((equal (match-string 1 ts) ".")
>> -             ;; Shift starting date to today
>> +             ;; Shift starting date to now
>>              (org-timestamp-change
>> -              (- (time-to-days (current-time)) (time-to-days time))
>> -              'day))
>> +               (truncate (/ (- (time-to-seconds (current-time))
>> +                               (time-to-seconds time)) 60))
>> +              'minute))
>>             ((equal (match-string 1 ts) "+")
>>              (while (or (= nshift 0)
>> -                        (<= (time-to-days time) (time-to-days
>> (current-time))))
>> +                        (<= (time-to-seconds time)
>> +                             (time-to-seconds (current-time))))
>>                (when (= (incf nshift) nshiftmax)
>>                  (or (y-or-n-p (message "%d repeater intervals were not
>> enough to shift date past today.  Continue? " nshift))
>>                      (error "Abort")))
>> @@ -11456,7 +11459,7 @@ This function is run automatically after each
>> state change to a DONE state."
>>              ;; rematch, so that we have everything in place for the real
>> shift
>>              (org-at-timestamp-p t)
>>              (setq ts (match-string 1))
>> -             (string-match "\\([.+]\\)?\\(\\+[0-9]+\\)\\([dwmy]\\)"
>> ts))))
>> +             (string-match "\\([.+]\\)?\\(\\+[0-9]+\\)\\([MHdwmy]\\)"
>> ts))))
>>          (org-timestamp-change n (cdr (assoc what whata)))
>>          (setq msg (concat msg type " " org-last-changed-timestamp " "))))
>>     (setq org-log-post-message msg)
>> @@ -14687,7 +14690,7 @@ The command returns the inserted time stamp."
>>         t1 w1 with-hm tf time str w2 (off 0))
>>   (save-match-data
>>     (setq t1 (org-parse-time-string ts t))
>> -      (if (string-match "\\(-[0-9]+:[0-9]+\\)?\\(
>> [.+]?\\+[0-9]+[dwmy]\\(/[0-9]+[dwmy]\\)?\\)?\\'" ts)
>> +      (if (string-match "\\(-[0-9]+:[0-9]+\\)?\\(
>> [.+]?\\+[0-9]+[MHdwmy]\\(/[0-9]+[dwmy]\\)?\\)?\\'" ts)
>>          (setq off (- (match-end 0) (match-beginning 0)))))
>>   (setq end (- end off))
>>   (setq w1 (- end beg)
>> @@ -15177,8 +15180,8 @@ With prefix ARG, change that many days."
>> (defun org-timestamp-change (n &optional what updown)
>>  "Change the date in the time stamp at point.
>> The date will be changed by N times WHAT.  WHAT can be `day', `month',
>> -`year', `minute', `second'.  If WHAT is not given, the cursor position
>> -in the timestamp determines what will be changed."
>> +`year', `hour', `minute', `second'.  If WHAT is not given, the cursor
>> +position in the timestamp determines what will be changed."
>>  (let ((pos (point))
>>        with-hm inactive
>>        (dm (max (nth 1 org-time-stamp-rounding-minutes) 1))
>> @@ -15199,7 +15202,7 @@ in the timestamp determines what will be changed."
>>            ts (match-string 0))
>>     (replace-match "")
>>     (if (string-match
>> -          "\\(\\(-[012][0-9]:[0-5][0-9]\\)?\\(
>> +[.+]?[-+][0-9]+[dwmy]\\(/[0-9]+[dwmy]\\)?\\)*\\)[]>]"
>> +          "\\(\\(-[012][0-9]:[0-5][0-9]\\)?\\(
>> +[.+]?[-+][0-9]+[HMdwmy]\\(/[0-9]+[dwmy]\\)?\\)*\\)[]>]"
>>           ts)
>>          (setq extra (match-string 1 ts)))
>>     (if (string-match "^.\\{10\\}.*?[0-9]+:[0-9][0-9]" ts)
>> --
>> 1.7.2.3
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> address@hidden
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> address@hidden
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]