[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[elpa] externals/transient 51c50d8c82 11/11: manual: Use updated support
|
From: |
Jonas Bernoulli |
|
Subject: |
[elpa] externals/transient 51c50d8c82 11/11: manual: Use updated support for definition commands |
|
Date: |
Sun, 26 Dec 2021 02:49:49 -0500 (EST) |
branch: externals/transient
commit 51c50d8c828b5fac2878b651e2188ad0c6f44184
Author: Jonas Bernoulli <jonas@bernoul.li>
Commit: Jonas Bernoulli <jonas@bernoul.li>
manual: Use updated support for definition commands
Instead of ox-texinfo+.el use the new implementation
that I expect to be merged into Org itself.
---
default.mk | 1 -
docs/.orgconfig | 4 +-
docs/Makefile | 3 +-
docs/transient.org | 148 +++++++++++++++++-----------------
docs/transient.texi | 223 +++++++++-------------------------------------------
5 files changed, 109 insertions(+), 270 deletions(-)
diff --git a/default.mk b/default.mk
index 08d3d74a88..eb1a74d17c 100644
--- a/default.mk
+++ b/default.mk
@@ -20,7 +20,6 @@ LOAD_PATH += -L .
ifndef ORG_LOAD_PATH
ORG_LOAD_PATH = -L ../../org/lisp
-ORG_LOAD_PATH += -L ../../ox-texinfo+
endif
INSTALL_INFO ?= $(shell command -v ginstall-info || printf install-info)
diff --git a/docs/.orgconfig b/docs/.orgconfig
index 8919537a19..3a00c75840 100644
--- a/docs/.orgconfig
+++ b/docs/.orgconfig
@@ -3,8 +3,8 @@
#+options: H:4 num:4 toc:2
#+property: header-args :eval never
-#+texinfo_deffn: t
+#+macro: kbd (eval (let ((case-fold-search nil) (regexp (regexp-opt '("SPC"
"RET" "LFD" "TAB" "BS" "ESC" "DELETE" "SHIFT" "Ctrl" "Meta" "Alt" "Cmd" "Super"
"UP" "LEFT" "RIGHT" "DOWN") 'words))) (format
"@@texinfo:@kbd{@@%s@@texinfo:}@@" (replace-regexp-in-string regexp
"@@texinfo:@key{@@\\&@@texinfo:}@@" $1 t))))
#+macro: year (eval (format-time-string "%Y"))
-#+macro: version (eval (ox-texinfo+-get-version 'mixed))
+#+macro: version (eval (or (getenv "PACKAGE-VERSION") (ignore-errors (car
(process-lines "git" "describe" "--exact"))) (ignore-errors (concat (car
(process-lines "git" "describe" (if (getenv "AMEND") "HEAD~" "HEAD"))) "+1"))))
#+language: en
diff --git a/docs/Makefile b/docs/Makefile
index 4ac8df4ae9..13237ca8d9 100644
--- a/docs/Makefile
+++ b/docs/Makefile
@@ -7,8 +7,7 @@ info: $(PKG).info dir
html: $(PKG).html
pdf: $(PKG).pdf
-ORG_ARGS = --batch -Q $(ORG_LOAD_PATH) -l ox-texinfo+
-ORG_EVAL = --eval "(setq org-texinfo+-dissolve-noexport-headlines t)"
+ORG_ARGS = --batch -Q $(ORG_LOAD_PATH)
ORG_EVAL += --eval "(setq indent-tabs-mode nil)"
ORG_EVAL += --eval "(setq org-src-preserve-indentation nil)"
ORG_EVAL += --funcall org-texinfo-export-to-texinfo
diff --git a/docs/transient.org b/docs/transient.org
index c92122c004..798c27dd46 100644
--- a/docs/transient.org
+++ b/docs/transient.org
@@ -209,8 +209,8 @@ transient.
the latter, then you can later resume the stack of transients using
~M-x transient-resume~.
-- Key: C-g, transient-quit-seq
-- Key: C-g, transient-quit-one
+- Key: C-g (transient-quit-seq) ::
++ Key: C-g (transient-quit-one) ::
This key quits the currently active incomplete key sequence, if any,
or else the current transient. When quitting the current transient,
@@ -220,13 +220,13 @@ Transient's predecessor bound ~q~ instead of ~C-g~ to the
quit command.
To learn how to get that binding back see ~transient-bind-q-to-quit~'s
doc string.
-- Key: C-q, transient-quit-all
+- Key: C-q (transient-quit-all) ::
This command quits the currently active incomplete key sequence, if
any, and all transients, including the active transient and all
suspended transients, if any.
-- Key: C-z, transient-suspend
+- Key: C-z (transient-suspend) ::
Like ~transient-quit-all~, this command quits an incomplete key
sequence, if any, and all transients. Additionally it saves the
@@ -239,7 +239,7 @@ doc string.
If another stack is already saved, then saving a new stack discards
the previous stack.
-- Key: M-x transient-resume, transient-resume
+- Key: M-x transient-resume ::
This command resumes the previously suspended stack of transients,
if any.
@@ -257,14 +257,14 @@ the section disappears again. Note however that one of
these commands
is described as "Show common permanently"; invoke that if you want the
common commands to always be shown for all transients.
-- Key: C-x t, transient-toggle-common
+- Key: C-x t (transient-toggle-common) ::
This command toggles whether the generic commands that are common to
all transients are always displayed or only after typing the
incomplete prefix key sequence ~C-x~. This only affects the current
Emacs session.
-- User Option: transient-show-common-commands
+- User Option: transient-show-common-commands ::
This option controls whether shared suffix commands are shown
alongside the transient-specific infix and suffix commands. By
@@ -297,17 +297,17 @@ suffix command, then the value is merely saved to the
transient's
history. That value won't be used when the transient is next invoked
but it is easily accessible (see [[*Using History]]).
-- Key: C-x s, transient-set
+- Key: C-x s (transient-set) ::
This command saves the value of the active transient for this Emacs
session.
-- Key: C-x C-s, transient-save
+- Key: C-x C-s (transient-save) ::
Save the value of the active transient persistently across Emacs
sessions.
-- User Option: transient-values-file
+- User Option: transient-values-file ::
This file is used to persist the values of transients between Emacs
sessions.
@@ -323,14 +323,14 @@ value is saved to its history. These values can be
cycled through the
same way one can cycle through the history of commands that read
user-input in the minibuffer.
-- Key: C-M-p, transient-history-prev
-- Key: C-x p, transient-history-prev
+- Key: C-M-p (transient-history-prev) ::
++ Key: C-x p ::
This command switches to the previous value used for the active
transient.
-- Key: C-M-n, transient-history-next
-- Key: C-x n, transient-history-next
+- Key: C-M-n (transient-history-next) ::
++ Key: C-x n ::
This command switches to the next value used for the active
transient.
@@ -347,12 +347,12 @@ read the same kind of value to also use the same history
key (see
Both kinds of history are saved to a file when Emacs is exited.
-- User Option: transient-history-file
+- User Option: transient-history-file ::
This file is used to persist the history of transients and their
infixes between Emacs sessions.
-- User Option: transient-history-limit
+- User Option: transient-history-limit ::
This option controls how many history elements are kept at the time
the history is saved in ~transient-history-file~.
@@ -364,7 +364,7 @@ be familiar with. To make it trivial to get help for
these, Transient
provides access to the documentation directly from the active
transient.
-- Key: C-h, transient-help
+- Key: C-h (transient-help) ::
This command enters help mode. When help mode is active, then
typing ~<key>~ shows information about the suffix command that ~<key>~
@@ -410,18 +410,18 @@ expect that it won't be of use to most users, and they
should place
very important suffixes on a lower level, so that they remain
available even if the user lowers the transient level.
-- User Option: transient-default-level
+- User Option: transient-default-level ::
This option controls which suffix levels are made available by
default. It sets the transient-level for transients for which the
user has not set that individually.
-- User Option: transient-levels-file
+- User Option: transient-levels-file ::
This file is used to persist the levels of transients and their
suffixes between Emacs sessions.
-- Key: C-x l, transient-set-level
+- Key: C-x l (transient-set-level) ::
This command enters edit mode. When edit mode is active, then all
infixes and suffixes that are currently usable are displayed along
@@ -455,13 +455,13 @@ following commands. These commands are never shown in
the transient
window, and the key bindings are the same as for ~scroll-up-command~ and
~scroll-down-command~ in other buffers.
-- Command: transient-scroll-up arg
+- Command: transient-scroll-up arg ::
This command scrolls text of transient popup window upward ARG
lines. If ARG is ~nil~, then it scrolls near full screen. This
is a wrapper around ~scroll-up-command~ (which see).
-- Command: transient-scroll-down arg
+- Command: transient-scroll-down arg ::
This command scrolls text of transient popup window down ARG
lines. If ARG is ~nil~, then it scrolls near full screen. This
@@ -469,7 +469,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
** Other Options
-- User Option: transient-show-popup
+- User Option: transient-show-popup ::
This option controls whether the current transient's infix and
suffix commands are shown in the popup buffer.
@@ -490,7 +490,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
then the popup is shown after that many seconds of inactivity
(using the absolute value).
-- User Option: transient-enable-popup-navigation
+- User Option: transient-enable-popup-navigation ::
This option controls whether navigation commands are enabled in the
transient popup buffer.
@@ -506,7 +506,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
- ~<mouse-1>~ invokes the clicked on suffix.
- ~C-s~ and ~C-r~ start isearch in the popup buffer.
-- User Option: transient-display-buffer-action
+- User Option: transient-display-buffer-action ::
This option specifies the action used to display the transient popup
buffer. The transient popup buffer is displayed in a window using
@@ -546,7 +546,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
If you change the value of this option, then you might also
want to change the value of ~transient-mode-line-format~.
-- User Option: transient-mode-line-format
+- User Option: transient-mode-line-format ::
This option controls whether the transient popup buffer has a
mode-line, separator line, or neither.
@@ -563,14 +563,14 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
Otherwise this can be any mode-line format. See [[info:elisp#Mode
Line Format]] for details.
-- User Option: transient-read-with-initial-input
+- User Option: transient-read-with-initial-input ::
This option controls whether the last history element is used as the
initial minibuffer input when reading the value of an infix argument
from the user. If ~nil~, then there is no initial input and the first
element has to be accessed the same way as the older elements.
-- User Option: transient-highlight-mismatched-keys
+- User Option: transient-highlight-mismatched-keys ::
This option controls whether key bindings of infix commands that do
not match the respective command-line argument should be highlighted.
@@ -589,7 +589,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
The highlighting is done using one of the faces
~transient-mismatched-key~ and ~transient-nonstandard-key~.
-- User Option: transient-substitute-key-function
+- User Option: transient-substitute-key-function ::
This function is used to modify key bindings. If the value of this
option is nil (the default), then no substitution is performed.
@@ -613,7 +613,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
key))))
#+END_SRC
-- User Option: transient-detect-key-conflicts
+- User Option: transient-detect-key-conflicts ::
This option controls whether key binding conflicts should be
detected at the time the transient is invoked. If so, then this
@@ -627,7 +627,7 @@ window, and the key bindings are the same as for
~scroll-up-command~ and
predicates of those suffixes prevent that more than one of them is
enabled at a time.
-- User Option: transient-force-fixed-pitch
+- User Option: transient-force-fixed-pitch ::
This option controls whether to force the use of a monospaced font
in popup buffer. Even if you use a proportional font for the
@@ -673,29 +673,29 @@ These functions operate on the information stored in the
that tree are not objects but have the form ~(LEVEL CLASS PLIST)~, where
plist should set at least ~:key~, ~:description~ and ~:command~.
-- Function: transient-insert-suffix prefix loc suffix
+- Function: transient-insert-suffix prefix loc suffix ::
This function inserts suffix or group SUFFIX into PREFIX before LOC.
-- Function: transient-append-suffix prefix loc suffix
+- Function: transient-append-suffix prefix loc suffix ::
This function inserts suffix or group SUFFIX into PREFIX after LOC.
-- Function: transient-replace-suffix prefix loc suffix
+- Function: transient-replace-suffix prefix loc suffix ::
This function replaces the suffix or group at LOC in PREFIX with
suffix or group SUFFIX.
-- Function: transient-remove-suffix prefix loc
+- Function: transient-remove-suffix prefix loc ::
This function removes the suffix or group at LOC in PREFIX.
-- Function: transient-get-suffix prefix loc
+- Function: transient-get-suffix prefix loc ::
This function returns the suffix or group at LOC in PREFIX. The
returned value has the form mentioned above.
-- Function: transient-suffix-put prefix loc prop value
+- Function: transient-suffix-put prefix loc prop value ::
This function edits the suffix or group at LOC in PREFIX, by setting
the PROP of its plist to VALUE.
@@ -719,7 +719,7 @@ binds the transient's infix and suffix commands. In other
words, it
defines the complete transient, not just the transient prefix command
that is used to invoke that transient.
-- Macro: transient-define-prefix name arglist [docstring] [keyword value]...
group... [body...]
+- Macro: transient-define-prefix name arglist [docstring] [keyword value]...
group... [body...] ::
This macro defines NAME as a transient prefix command and binds the
transient's infix and suffix commands.
@@ -972,7 +972,7 @@ Note that an infix is a special kind of suffix. Depending
on context
"suffixes" means "suffixes (including infixes)" or "non-infix
suffixes".
-- Macro: transient-define-suffix name arglist [docstring] [keyword value]...
body...
+- Macro: transient-define-suffix name arglist [docstring] [keyword value]...
body... ::
This macro defines NAME as a transient suffix command.
@@ -989,7 +989,7 @@ suffixes".
The infix arguments are usually accessed by using ~transient-args~
inside ~interactive~.
-- Macro: transient-define-infix name arglist [docstring] [keyword value]...
+- Macro: transient-define-infix name arglist [docstring] [keyword value]... ::
This macro defines NAME as a transient infix command.
@@ -1026,7 +1026,7 @@ suffixes".
~transient-define-suffix~ to define the infix command and use ~t~ as the
value of the ~:transient~ keyword.
-- Macro: transient-define-argument name arglist [docstring] [keyword value]...
+- Macro: transient-define-argument name arglist [docstring] [keyword value]...
::
This macro defines NAME as a transient infix command.
@@ -1053,7 +1053,7 @@ The preferred way of doing that is to call the
~transient-args~
function, which for infix arguments serves about the same purpose as
~prefix-arg~ serves for prefix arguments.
-- Function: transient-args prefix
+- Function: transient-args prefix ::
This function returns the value of the transient prefix command
PREFIX.
@@ -1063,7 +1063,7 @@ function, which for infix arguments serves about the same
purpose as
command was not invoked from PREFIX, then it returns the set, saved
or default value for PREFIX.
-- Function: transient-arg-value arg args
+- Function: transient-arg-value arg args ::
This function return the value of ARG as it appears in ARGS.
@@ -1071,14 +1071,14 @@ function, which for infix arguments serves about the
same purpose as
returned as a string, using the empty string for the empty value,
or nil if the option does not appear in ARGS.
-- Function: transient-suffixes prefix
+- Function: transient-suffixes prefix ::
This function returns the suffixes of the transient prefix command
PREFIX. This is a list of objects. This function should only be
used if you need the objects (as opposed to just their values) and
if the current command is not being invoked from PREFIX.
-- Variable: transient-current-suffixes
+- Variable: transient-current-suffixes ::
The suffixes of the transient from which this suffix command was
invoked. This is a list of objects. Usually it is sufficient to
@@ -1086,13 +1086,13 @@ function, which for infix arguments serves about the
same purpose as
values. In complex cases it might be necessary to use this variable
instead, i.e. if you need access to information beside the value.
-- Variable: transient-current-prefix
+- Variable: transient-current-prefix ::
The transient from which this suffix command was invoked. The
returned value is a ~transient-prefix~ object, which holds information
associated with the transient prefix command.
-- Variable: transient-current-command
+- Variable: transient-current-command ::
The transient from which this suffix command was invoked. The
returned value is a symbol, the transient prefix command.
@@ -1178,7 +1178,7 @@ and set the values of ~transient--exitp~,
~transient--helpp~ or
The default for infixes is ~transient--do-stay~. This is also the only
function that makes sense for infixes.
-- Function: transient--do-stay
+- Function: transient--do-stay ::
Call the command without exporting variables and stay transient.
@@ -1189,15 +1189,15 @@ function that makes sense for infixes.
The default for suffixes is ~transient--do-exit~.
-- Function: transient--do-exit
+- Function: transient--do-exit ::
Call the command after exporting variables and exit the transient.
-- Function: transient--do-call
+- Function: transient--do-call ::
Call the command after exporting variables and stay transient.
-- Function: transient--do-replace
+- Function: transient--do-replace ::
Call the transient prefix command, replacing the active transient.
@@ -1218,11 +1218,11 @@ If you want to let the user invoke non-suffix commands,
then use
~transient--do-stay~ as the value of the prefix's ~transient-non-suffix~
slot.
-- Function: transient--do-warn
+- Function: transient--do-warn ::
Call ~transient-undefined~ and stay transient.
-- Function: transient--do-noop
+- Function: transient--do-noop ::
Call ~transient-noop~ and stay transient.
@@ -1231,19 +1231,19 @@ slot.
:UNNUMBERED: notoc
:END:
-- Function: transient--do-quit-one
+- Function: transient--do-quit-one ::
If active, quit help or edit mode, else exit the active transient.
This is used when the user pressed ~C-g~.
-- Function: transient--do-quit-all
+- Function: transient--do-quit-all ::
Exit all transients without saving the transient stack.
This is used when the user pressed ~C-q~.
-- Function: transient--do-suspend
+- Function: transient--do-suspend ::
Suspend the active transient, saving the transient stack.
@@ -1333,7 +1333,7 @@ beginning of the class specification, e.g. ~[:class
transient-columns
** Group Methods
-- Function: transient-setup-children group children
+- Function: transient-setup-children group children ::
This generic function can be used to setup the children or a group.
@@ -1347,7 +1347,7 @@ beginning of the class specification, e.g. ~[:class
transient-columns
arbitrary changes to the children including constructing new
children from scratch.
-- Function: transient--insert-group group
+- Function: transient--insert-group group ::
This generic function formats the group and its elements and inserts
the result into the current buffer, which is a temporary buffer.
@@ -1363,7 +1363,7 @@ Currently the ~transient-prefix~ class is being used for
all prefix
commands and there is only a single generic function that can be
specialized based on the class of a prefix command.
-- Function: transient--history-init obj
+- Function: transient--history-init obj ::
This generic function is called while setting up the transient and
is responsible for initializing the ~history~ slot. This is the
@@ -1431,7 +1431,7 @@ functions use ~describe-function~.
*** Suffix Value Methods
-- Function: transient-init-value obj
+- Function: transient-init-value obj ::
This generic function sets the initial value of the object OBJ.
@@ -1443,7 +1443,7 @@ functions use ~describe-function~.
your class derives from that directly, then you must implement
a method.
-- Function: transient-infix-read obj
+- Function: transient-infix-read obj ::
This generic function determines the new value of the infix object
OBJ.
@@ -1460,16 +1460,16 @@ functions use ~describe-function~.
infix command determines what the new value should be, based
on the previous value.
-- Function: transient-prompt obj
+- Function: transient-prompt obj ::
This generic function returns the prompt to be used to read infix
object OBJ's value.
-- Function: transient-infix-set obj value
+- Function: transient-infix-set obj value ::
This generic function sets the value of infix object OBJ to VALUE.
-- Function: transient-infix-value obj
+- Function: transient-infix-value obj ::
This generic function returns the value of the suffix object OBJ.
@@ -1483,7 +1483,7 @@ functions use ~describe-function~.
Usually only infixes have a value, but see the method for
~transient-suffix~.
-- Function: transient-init-scope obj
+- Function: transient-init-scope obj ::
This generic function sets the scope of the suffix object OBJ.
@@ -1499,7 +1499,7 @@ functions use ~describe-function~.
*** Suffix Format Methods
-- Function: transient-format obj
+- Function: transient-format obj ::
This generic function formats and returns OBJ for display.
@@ -1508,22 +1508,22 @@ functions use ~describe-function~.
command was invoked to be current, then do so by temporarily
making ~transient--source-buffer~ current.
-- Function: transient-format-key obj
+- Function: transient-format-key obj ::
This generic function formats OBJ's ~key~ for display and returns the
result.
-- Function: transient-format-description obj
+- Function: transient-format-description obj ::
This generic function formats OBJ's ~description~ for display and
returns the result.
-- Function: transient-format-value obj
+- Function: transient-format-value obj ::
This generic function formats OBJ's value for display and returns
the result.
-- Function: transient-show-help obj
+- Function: transient-show-help obj ::
Show help for the prefix, infix or suffix command represented by
OBJ.
@@ -2121,12 +2121,7 @@ necessary changes. See its doc string for more
information.
:INDEX: ky
:COOKIE_DATA: recursive
:END:
-* Command Index
-:PROPERTIES:
-:APPENDIX: t
-:INDEX: cp
-:END:
-* Function Index
+* Function and Command Index
:PROPERTIES:
:APPENDIX: t
:INDEX: fn
@@ -2167,7 +2162,6 @@ General Public License for more details.
# IMPORTANT: Also update ORG_ARGS and ORG_EVAL in the Makefile.
# Local Variables:
-# eval: (require 'ox-texinfo+ nil t)
# indent-tabs-mode: nil
# org-src-preserve-indentation: nil
# End:
diff --git a/docs/transient.texi b/docs/transient.texi
index 3347e3be83..3f4fc7f29d 100644
--- a/docs/transient.texi
+++ b/docs/transient.texi
@@ -31,7 +31,7 @@ General Public License for more details.
@finalout
@titlepage
@title Transient User and Developer Manual
-@subtitle for version 0.3.7 (v0.3.7-12-g34911615+1)
+@subtitle for version v0.3.7-22-gabbe1756+1
@author Jonas Bernoulli
@page
@vskip 0pt plus 1filll
@@ -65,7 +65,7 @@ Calling a suffix command usually causes the transient to be
exited
but suffix commands can also be configured to not exit the transient.
@noindent
-This manual is for Transient version 0.3.7 (v0.3.7-12-g34911615+1).
+This manual is for Transient version v0.3.7-22-gabbe1756+1.
@quotation
Copyright (C) 2018-2021 Jonas Bernoulli <jonas@@bernoul.li>
@@ -92,8 +92,7 @@ General Public License for more details.
* Related Abstractions and Packages::
* FAQ::
* Keystroke Index::
-* Command Index::
-* Function Index::
+* Function and Command Index::
* Variable Index::
@detailmenu
@@ -331,13 +330,12 @@ the latter, then you can later resume the stack of
transients using
@code{M-x transient-resume}.
@table @asis
+@item @kbd{C-g} (@code{transient-quit-seq})
+@itemx @kbd{C-g} (@code{transient-quit-one})
@kindex C-g
-@cindex transient-quit-seq
-@item @kbd{C-g} @tie{}@tie{}@tie{}@tie{}(@code{transient-quit-seq})
@kindex C-g
-@cindex transient-quit-one
-@item @kbd{C-g} @tie{}@tie{}@tie{}@tie{}(@code{transient-quit-one})
-
+@findex transient-quit-seq
+@findex transient-quit-one
This key quits the currently active incomplete key sequence, if any,
or else the current transient. When quitting the current transient,
then it returns to the previous transient, if any.
@@ -348,18 +346,16 @@ To learn how to get that binding back see
@code{transient-bind-q-to-quit}'s
doc string.
@table @asis
+@item @kbd{C-q} (@code{transient-quit-all})
@kindex C-q
-@cindex transient-quit-all
-@item @kbd{C-q} @tie{}@tie{}@tie{}@tie{}(@code{transient-quit-all})
-
+@findex transient-quit-all
This command quits the currently active incomplete key sequence, if
any, and all transients, including the active transient and all
suspended transients, if any.
+@item @kbd{C-z} (@code{transient-suspend})
@kindex C-z
-@cindex transient-suspend
-@item @kbd{C-z} @tie{}@tie{}@tie{}@tie{}(@code{transient-suspend})
-
+@findex transient-suspend
Like @code{transient-quit-all}, this command quits an incomplete key
sequence, if any, and all transients. Additionally it saves the
stack of transients so that it can easily be resumed (which is
@@ -371,10 +367,8 @@ Note that only a single stack of transients can be saved
at a time.
If another stack is already saved, then saving a new stack discards
the previous stack.
-@kindex M-x transient-resume
-@cindex transient-resume
-@item @kbd{M-x transient-resume}
@tie{}@tie{}@tie{}@tie{}(@code{transient-resume})
-
+@item @kbd{M-x transient-resume}
+@findex transient-resume
This command resumes the previously suspended stack of transients,
if any.
@end table
@@ -394,19 +388,16 @@ is described as "Show common permanently"; invoke that if
you want the
common commands to always be shown for all transients.
@table @asis
+@item @kbd{C-x t} (@code{transient-toggle-common})
@kindex C-x t
-@cindex transient-toggle-common
-@item @kbd{C-x t} @tie{}@tie{}@tie{}@tie{}(@code{transient-toggle-common})
-
+@findex transient-toggle-common
This command toggles whether the generic commands that are common to
all transients are always displayed or only after typing the
incomplete prefix key sequence @code{C-x}. This only affects the current
Emacs session.
-
@end table
@defopt transient-show-common-commands
-
This option controls whether shared suffix commands are shown
alongside the transient-specific infix and suffix commands. By
default the shared commands are not shown to avoid overwhelming
@@ -443,24 +434,20 @@ history. That value won't be used when the transient is
next invoked
but it is easily accessible (see @ref{Using History}).
@table @asis
+@item @kbd{C-x s} (@code{transient-set})
@kindex C-x s
-@cindex transient-set
-@item @kbd{C-x s} @tie{}@tie{}@tie{}@tie{}(@code{transient-set})
-
+@findex transient-set
This command saves the value of the active transient for this Emacs
session.
+@item @kbd{C-x C-s} (@code{transient-save})
@kindex C-x C-s
-@cindex transient-save
-@item @kbd{C-x C-s} @tie{}@tie{}@tie{}@tie{}(@code{transient-save})
-
+@findex transient-save
Save the value of the active transient persistently across Emacs
sessions.
-
@end table
@defopt transient-values-file
-
This file is used to persist the values of transients between Emacs
sessions.
@end defopt
@@ -474,23 +461,19 @@ same way one can cycle through the history of commands
that read
user-input in the minibuffer.
@table @asis
+@item @kbd{C-M-p} (@code{transient-history-prev})
+@itemx @kbd{C-x p}
@kindex C-M-p
-@cindex transient-history-prev
-@item @kbd{C-M-p} @tie{}@tie{}@tie{}@tie{}(@code{transient-history-prev})
@kindex C-x p
-@cindex transient-history-prev
-@item @kbd{C-x p} @tie{}@tie{}@tie{}@tie{}(@code{transient-history-prev})
-
+@findex transient-history-prev
This command switches to the previous value used for the active
transient.
+@item @kbd{C-M-n} (@code{transient-history-next})
+@itemx @kbd{C-x n}
@kindex C-M-n
-@cindex transient-history-next
-@item @kbd{C-M-n} @tie{}@tie{}@tie{}@tie{}(@code{transient-history-next})
@kindex C-x n
-@cindex transient-history-next
-@item @kbd{C-x n} @tie{}@tie{}@tie{}@tie{}(@code{transient-history-next})
-
+@findex transient-history-next
This command switches to the next value used for the active
transient.
@end table
@@ -508,13 +491,11 @@ read the same kind of value to also use the same history
key (see
Both kinds of history are saved to a file when Emacs is exited.
@defopt transient-history-file
-
This file is used to persist the history of transients and their
infixes between Emacs sessions.
@end defopt
@defopt transient-history-limit
-
This option controls how many history elements are kept at the time
the history is saved in @code{transient-history-file}.
@end defopt
@@ -528,10 +509,9 @@ provides access to the documentation directly from the
active
transient.
@table @asis
+@item @kbd{C-h} (@code{transient-help})
@kindex C-h
-@cindex transient-help
-@item @kbd{C-h} @tie{}@tie{}@tie{}@tie{}(@code{transient-help})
-
+@findex transient-help
This command enters help mode. When help mode is active, then
typing @code{<key>} shows information about the suffix command that
@code{<key>}
normally is bound to (instead of invoking it). Pressing @code{C-h} a
@@ -579,23 +559,20 @@ very important suffixes on a lower level, so that they
remain
available even if the user lowers the transient level.
@defopt transient-default-level
-
This option controls which suffix levels are made available by
default. It sets the transient-level for transients for which the
user has not set that individually.
@end defopt
@defopt transient-levels-file
-
This file is used to persist the levels of transients and their
suffixes between Emacs sessions.
@end defopt
@table @asis
+@item @kbd{C-x l} (@code{transient-set-level})
@kindex C-x l
-@cindex transient-set-level
-@item @kbd{C-x l} @tie{}@tie{}@tie{}@tie{}(@code{transient-set-level})
-
+@findex transient-set-level
This command enters edit mode. When edit mode is active, then all
infixes and suffixes that are currently usable are displayed along
with their levels. The colors of the levels indicate whether they
@@ -630,17 +607,13 @@ following commands. These commands are never shown in
the transient
window, and the key bindings are the same as for @code{scroll-up-command} and
@code{scroll-down-command} in other buffers.
-@cindex transient-scroll-up arg
@deffn Command transient-scroll-up arg
-
This command scrolls text of transient popup window upward ARG
lines. If ARG is @code{nil}, then it scrolls near full screen. This
is a wrapper around @code{scroll-up-command} (which see).
@end deffn
-@cindex transient-scroll-down arg
@deffn Command transient-scroll-down arg
-
This command scrolls text of transient popup window down ARG
lines. If ARG is @code{nil}, then it scrolls near full screen. This
is a wrapper around @code{scroll-down-command} (which see).
@@ -650,7 +623,6 @@ is a wrapper around @code{scroll-down-command} (which see).
@section Other Options
@defopt transient-show-popup
-
This option controls whether the current transient's infix and
suffix commands are shown in the popup buffer.
@@ -659,13 +631,11 @@ suffix commands are shown in the popup buffer.
If @code{t} (the default) then the popup buffer is shown as soon as a
transient prefix command is invoked.
-
@item
If @code{nil}, then the popup buffer is not shown unless the user
explicitly requests it, by pressing an incomplete prefix key
sequence.
-
@item
If a number, then the a brief one-line summary is shown instead of
the popup buffer. If zero or negative, then not even that summary
@@ -679,7 +649,6 @@ then the popup is shown after that many seconds of
inactivity
@end defopt
@defopt transient-enable-popup-navigation
-
This option controls whether navigation commands are enabled in the
transient popup buffer.
@@ -693,17 +662,14 @@ is non-nil, then the following features are available:
@code{<up>} moves the cursor to the previous suffix.
@code{<down>} moves the cursor to the next suffix.
@code{RET} invokes the suffix the cursor is on.
-
@item
@code{<mouse-1>} invokes the clicked on suffix.
-
@item
@code{C-s} and @code{C-r} start isearch in the popup buffer.
@end itemize
@end defopt
@defopt transient-display-buffer-action
-
This option specifies the action used to display the transient popup
buffer. The transient popup buffer is displayed in a window using
@code{(display-buffer BUFFER transient-display-buffer-action)}.
@@ -743,7 +709,6 @@ want to change the value of
@code{transient-mode-line-format}.
@end defopt
@defopt transient-mode-line-format
-
This option controls whether the transient popup buffer has a
mode-line, separator line, or neither.
@@ -760,7 +725,6 @@ Otherwise this can be any mode-line format. See @ref{Mode
Line Format,,,elisp,}
@end defopt
@defopt transient-read-with-initial-input
-
This option controls whether the last history element is used as the
initial minibuffer input when reading the value of an infix argument
from the user. If @code{nil}, then there is no initial input and the first
@@ -768,7 +732,6 @@ element has to be accessed the same way as the older
elements.
@end defopt
@defopt transient-highlight-mismatched-keys
-
This option controls whether key bindings of infix commands that do
not match the respective command-line argument should be highlighted.
For other infix commands this option has no effect.
@@ -788,7 +751,6 @@ The highlighting is done using one of the faces
@end defopt
@defopt transient-substitute-key-function
-
This function is used to modify key bindings. If the value of this
option is nil (the default), then no substitution is performed.
@@ -813,7 +775,6 @@ optimized for lisp.
@end defopt
@defopt transient-detect-key-conflicts
-
This option controls whether key binding conflicts should be
detected at the time the transient is invoked. If so, then this
results in an error, which prevents the transient from being used.
@@ -828,7 +789,6 @@ enabled at a time.
@end defopt
@defopt transient-force-fixed-pitch
-
This option controls whether to force the use of a monospaced font
in popup buffer. Even if you use a proportional font for the
@code{default} face, you might still want to use a monospaced font in
@@ -848,7 +808,6 @@ The following functions share a few arguments:
@item
PREFIX is a transient prefix command, a symbol.
-
@item
SUFFIX is a transient infix or suffix specification in the same form
as expected by @code{transient-define-prefix}. Note that an infix is a
@@ -859,7 +818,6 @@ means the former. See @ref{Suffix Specifications}.
SUFFIX may also be a group in the same form as expected by
@code{transient-define-prefix}. See @ref{Group Specifications}.
-
@item
LOC is a command, a key vector, a key description (a string as
returned by @code{key-description}), or a list specifying coordinates (the
@@ -882,34 +840,28 @@ that tree are not objects but have the form @code{(LEVEL
CLASS PLIST)}, where
plist should set at least @code{:key}, @code{:description} and @code{:command}.
@defun transient-insert-suffix prefix loc suffix
-
This function inserts suffix or group SUFFIX into PREFIX before LOC@.
@end defun
@defun transient-append-suffix prefix loc suffix
-
This function inserts suffix or group SUFFIX into PREFIX after LOC@.
@end defun
@defun transient-replace-suffix prefix loc suffix
-
This function replaces the suffix or group at LOC in PREFIX with
suffix or group SUFFIX@.
@end defun
@defun transient-remove-suffix prefix loc
-
This function removes the suffix or group at LOC in PREFIX@.
@end defun
@defun transient-get-suffix prefix loc
-
This function returns the suffix or group at LOC in PREFIX@. The
returned value has the form mentioned above.
@end defun
@defun transient-suffix-put prefix loc prop value
-
This function edits the suffix or group at LOC in PREFIX, by setting
the PROP of its plist to VALUE@.
@end defun
@@ -944,8 +896,7 @@ binds the transient's infix and suffix commands. In other
words, it
defines the complete transient, not just the transient prefix command
that is used to invoke that transient.
-@defmac transient-define-prefix name arglist [docstring] [keyword
value]@dots{} group@dots{} [body@dots{}]
-
+@defmac transient-define-prefix name arglist [docstring] [keyword value]...
group... [body...]
This macro defines NAME as a transient prefix command and binds the
transient's infix and suffix commands.
@@ -1046,11 +997,9 @@ DESCRIPTION at the very beginning of the vector. The
recommendation
is to use @code{:description} if some other keyword is also used, for
consistency, or DESCRIPTION otherwise, because it looks better.
-
@item
Likewise @code{:level} is equivalent to LEVEL@.
-
@item
Other important keywords include the @code{:if...} keywords. These
keywords control whether the group is available in a certain
@@ -1065,7 +1014,6 @@ initiate a rebase.
These predicates can also be used on individual suffixes and are
only documented once, see @ref{Predicate Slots}.
-
@item
The value of @code{:hide}, if non-nil, is a predicate that controls
whether the group is hidden by default. The key bindings for
@@ -1079,7 +1027,6 @@ suffixes, which assumes that a predicate like this is
used:
?\C-c)) ; the prefix key shared by all bindings
@end lisp
-
@item
The value of @code{:setup-children}, if non-nil, is a function that takes
two arguments the group object itself and a list of children.
@@ -1088,7 +1035,6 @@ of either group or suffix specifications. It can make
arbitrary
changes to the children including constructing new children from
scratch. Also see @code{transient-setup-children}.
-
@item
The boolean @code{:pad-keys} argument controls whether keys of all suffixes
contained in a group are right padded, effectively aligning the
@@ -1148,11 +1094,9 @@ the object's values just for the binding inside this
transient.
LEVEL is the suffix level, an integer between 1 and 7. See
@ref{Enabling and Disabling Suffixes}.
-
@item
KEY is the key binding, either a vector or key description string.
-
@item
DESCRIPTION is the description, either a string or a function that
returns a string. The function should be a lambda expression to
@@ -1196,7 +1140,6 @@ defined nor autoloaded, you can use a workaround like:
Instead of @code{featurep} you could also use @code{require} with a non-nil
value
for NOERROR@.
-
@item
The mandatory argument can also be a command-line argument, a
string. In that case an anonymous command is defined and bound.
@@ -1227,8 +1170,7 @@ Note that an infix is a special kind of suffix. Depending
on context
"suffixes" means "suffixes (including infixes)" or "non-infix
suffixes".
-@defmac transient-define-suffix name arglist [docstring] [keyword
value]@dots{} body@dots{}
-
+@defmac transient-define-suffix name arglist [docstring] [keyword value]...
body...
This macro defines NAME as a transient suffix command.
ARGLIST are the arguments that the command takes.
@@ -1245,8 +1187,7 @@ The infix arguments are usually accessed by using
@code{transient-args}
inside @code{interactive}.
@end defmac
-@defmac transient-define-infix name arglist [docstring] [keyword value]@dots{}
-
+@defmac transient-define-infix name arglist [docstring] [keyword value]...
This macro defines NAME as a transient infix command.
ARGLIST is always ignored (but mandatory never-the-less) and
@@ -1283,8 +1224,7 @@ define your own infix command class. In that case you
have to use
value of the @code{:transient} keyword.
@end defmac
-@defmac transient-define-argument name arglist [docstring] [keyword
value]@dots{}
-
+@defmac transient-define-argument name arglist [docstring] [keyword value]...
This macro defines NAME as a transient infix command.
This is an alias for @code{transient-define-infix}. Only use this alias
@@ -1313,7 +1253,6 @@ function, which for infix arguments serves about the same
purpose as
@code{prefix-arg} serves for prefix arguments.
@defun transient-args prefix
-
This function returns the value of the transient prefix command
PREFIX@.
@@ -1324,7 +1263,6 @@ or default value for PREFIX@.
@end defun
@defun transient-arg-value arg args
-
This function return the value of ARG as it appears in ARGS@.
For a switch a boolean is returned. For an option the value is
@@ -1333,7 +1271,6 @@ or nil if the option does not appear in ARGS@.
@end defun
@defun transient-suffixes prefix
-
This function returns the suffixes of the transient prefix command
PREFIX@. This is a list of objects. This function should only be
used if you need the objects (as opposed to just their values) and
@@ -1341,7 +1278,6 @@ if the current command is not being invoked from PREFIX@.
@end defun
@defvar transient-current-suffixes
-
The suffixes of the transient from which this suffix command was
invoked. This is a list of objects. Usually it is sufficient to
instead use the function @code{transient-args}, which returns a list of
@@ -1350,14 +1286,12 @@ instead, i.e. if you need access to information beside
the value.
@end defvar
@defvar transient-current-prefix
-
The transient from which this suffix command was invoked. The
returned value is a @code{transient-prefix} object, which holds information
associated with the transient prefix command.
@end defvar
@defvar transient-current-command
-
The transient from which this suffix command was invoked. The
returned value is a symbol, the transient prefix command.
@end defvar
@@ -1376,13 +1310,11 @@ The default behavior while a transient is active is as
follows:
Invoking an infix command does not affect the transient state; the
transient remains active.
-
@item
Invoking a (non-infix) suffix command "deactivates" the transient
state by removing the transient keymap and performing some
additional cleanup.
-
@item
Invoking a command that is bound in a keymap other than the
transient keymap is disallowed and trying to do so results in a
@@ -1408,10 +1340,8 @@ Valid values are booleans and the pre-commands described
below.
@itemize
@item
@code{t} is equivalent to @code{transient--do-stay}.
-
@item
@code{nil} is equivalent to @code{transient--do-exit}.
-
@item
If @code{transient} is unbound (and that is actually the default for
non-infix suffixes) then the value of the prefix's
@@ -1420,7 +1350,6 @@ slot is @code{nil}, so the suffix's @code{transient} slot
being unbound is
essentially equivalent to it being @code{nil}.
@end itemize
-
@item
A suffix command can be a prefix command itself, i.e. a
"sub-prefix". While a sub-prefix is active we nearly always want
@@ -1436,7 +1365,6 @@ suffixes unbound means "do exit but allow going back",
which is the
default, while @code{nil} means "do exit permanently", which requires that
slot to be explicitly set to that value.
-
@item
The transient-ness of certain built-in suffix commands is specified
using @code{transient-predicate-map}. This is a special keymap, which
@@ -1464,7 +1392,6 @@ The default for infixes is @code{transient--do-stay}.
This is also the only
function that makes sense for infixes.
@defun transient--do-stay
-
Call the command without exporting variables and stay transient.
@end defun
@@ -1474,17 +1401,14 @@ Call the command without exporting variables and stay
transient.
The default for suffixes is @code{transient--do-exit}.
@defun transient--do-exit
-
Call the command after exporting variables and exit the transient.
@end defun
@defun transient--do-call
-
Call the command after exporting variables and stay transient.
@end defun
@defun transient--do-replace
-
Call the transient prefix command, replacing the active transient.
This is used for suffixes that are prefixes themselves, i.e. for
@@ -1504,12 +1428,10 @@ If you want to let the user invoke non-suffix commands,
then use
slot.
@defun transient--do-warn
-
Call @code{transient-undefined} and stay transient.
@end defun
@defun transient--do-noop
-
Call @code{transient-noop} and stay transient.
@end defun
@@ -1517,21 +1439,18 @@ Call @code{transient-noop} and stay transient.
@subheading Special Pre-Commands
@defun transient--do-quit-one
-
If active, quit help or edit mode, else exit the active transient.
This is used when the user pressed @code{C-g}.
@end defun
@defun transient--do-quit-all
-
Exit all transients without saving the transient stack.
This is used when the user pressed @code{C-q}.
@end defun
@defun transient--do-suspend
-
Suspend the active transient, saving the transient stack.
This is used when the user pressed @code{C-z}.
@@ -1562,7 +1481,6 @@ without having to convince the maintainer of Transient
that that new
type is important enough to justify adding a special case to a dozen
or so functions.
-
@item
Associating a command with an object makes it possible to easily
store information that is specific to that particular command.
@@ -1609,12 +1527,10 @@ The abstract @code{transient-child} class is the base
class of both
This class exists because the elements (aka "children") of certain
groups can be other groups instead of suffix and infix commands.
-
@item
The abstract @code{transient-group} class is the superclass of all other
group classes.
-
@item
The @code{transient-column} class is the simplest group.
@@ -1624,11 +1540,9 @@ then this class is used.
This class displays each element on a separate line.
-
@item
The @code{transient-row} class displays all elements on a single line.
-
@item
The @code{transient-columns} class displays commands organized in columns.
@@ -1640,7 +1554,6 @@ This is the default "nested" group. If the class is not
specified
explicitly and the first element is a vector (i.e. a group), then
this class is used.
-
@item
The @code{transient-subgroups} class wraps other groups.
@@ -1654,7 +1567,6 @@ elements.
@section Group Methods
@defun transient-setup-children group children
-
This generic function can be used to setup the children or a group.
The default implementation usually just returns the children
@@ -1669,7 +1581,6 @@ children from scratch.
@end defun
@defun transient--insert-group group
-
This generic function formats the group and its elements and inserts
the result into the current buffer, which is a temporary buffer.
The contents of that buffer are later inserted into the popup buffer.
@@ -1687,7 +1598,6 @@ commands and there is only a single generic function that
can be
specialized based on the class of a prefix command.
@defun transient--history-init obj
-
This generic function is called while setting up the transient and
is responsible for initializing the @code{history} slot. This is the
transient-wide history; many individual infixes also have a history
@@ -1712,7 +1622,6 @@ All suffix and infix classes derive from
@code{transient-suffix}, which in
turn derives from @code{transient-child}, from which @code{transient-group}
also
derives (see @ref{Group Classes}).
-
@item
All infix classes derive from the abstract @code{transient-infix} class,
which in turn derives from the @code{transient-suffix} class.
@@ -1727,34 +1636,28 @@ methods.
Also, infixes and non-infix suffixes are usually defined using
different macros (see @ref{Defining Suffix and Infix Commands}).
-
@item
Classes used for infix commands that represent arguments should
be derived from the abstract @code{transient-argument} class.
-
@item
The @code{transient-switch} class (or a derived class) is used for infix
arguments that represent command-line switches (arguments that do
not take a value).
-
@item
The @code{transient-option} class (or a derived class) is used for infix
arguments that represent command-line options (arguments that do
take a value).
-
@item
The @code{transient-switches} class can be used for a set of mutually
exclusive command-line switches.
-
@item
The @code{transient-files} class can be used for a "--" argument that
indicates that all remaining arguments are files.
-
@item
Classes used for infix commands that represent variables should
derived from the abstract @code{transient-variables} class.
@@ -1780,7 +1683,6 @@ functions use @code{describe-function}.
@subsection Suffix Value Methods
@defun transient-init-value obj
-
This generic function sets the initial value of the object OBJ@.
This function is called for all suffix commands, but unless a
@@ -1793,7 +1695,6 @@ a method.
@end defun
@defun transient-infix-read obj
-
This generic function determines the new value of the infix object
OBJ@.
@@ -1811,18 +1712,15 @@ on the previous value.
@end defun
@defun transient-prompt obj
-
This generic function returns the prompt to be used to read infix
object OBJ's value.
@end defun
@defun transient-infix-set obj value
-
This generic function sets the value of infix object OBJ to VALUE@.
@end defun
@defun transient-infix-value obj
-
This generic function returns the value of the suffix object OBJ@.
This function is called by @code{transient-args} (which see), meaning this
@@ -1837,7 +1735,6 @@ Usually only infixes have a value, but see the method for
@end defun
@defun transient-init-scope obj
-
This generic function sets the scope of the suffix object OBJ@.
The scope is actually a property of the transient prefix, not of
@@ -1855,7 +1752,6 @@ implementation, which is a noop.
@subsection Suffix Format Methods
@defun transient-format obj
-
This generic function formats and returns OBJ for display.
When this function is called, then the current buffer is some
@@ -1865,25 +1761,21 @@ making @code{transient--source-buffer} current.
@end defun
@defun transient-format-key obj
-
This generic function formats OBJ's @code{key} for display and returns the
result.
@end defun
@defun transient-format-description obj
-
This generic function formats OBJ's @code{description} for display and
returns the result.
@end defun
@defun transient-format-value obj
-
This generic function formats OBJ's value for display and returns
the result.
@end defun
@defun transient-show-help obj
-
Show help for the prefix, infix or suffix command represented by
OBJ@.
@@ -1907,27 +1799,23 @@ the prefix and its suffixes. The command
@code{transient-help} uses the
method @code{transient-show-help} (which see) to lookup and use these
values.
-
@item
@code{history-key} If multiple prefix commands should share a single value,
then this slot has to be set to the same value for all of them. You
probably don't want that.
-
@item
@code{transient-suffix} and @code{transient-non-suffix} play a part when
determining whether the currently active transient prefix command
remains active/transient when a suffix or abitrary non-suffix
command is invoked. See @ref{Transient State}.
-
@item
@code{incompatible} A list of lists. Each sub-list specifies a set of
mutually exclusive arguments. Enabling one of these arguments
causes the others to be disabled. An argument may appear in
multiple sub-lists.
-
@item
@code{scope} For some transients it might be necessary to have a sort of
secondary value, called a "scope". See @code{transient-define-prefix}.
@@ -1945,25 +1833,21 @@ set in calls to @code{transient-define-prefix}.
of that object is stored in the global variable @code{transient--prefix}
and the prototype is stored in the clone's @code{prototype} slot.
-
@item
@code{command} The command, a symbol. Each transient prefix command
consists of a command, which is stored in a symbol's function slot
and an object, which is stored in the @code{transient--prefix} property
of the same symbol.
-
@item
@code{level} The level of the prefix commands. The suffix commands whose
layer is equal or lower are displayed. See @ref{Enabling and Disabling
Suffixes}.
-
@item
@code{value} The likely outdated value of the prefix. Instead of accessing
this slot directly you should use the function @code{transient-get-value},
which is guaranteed to return the up-to-date value.
-
@item
@code{history} and @code{history-pos} are used to keep track of historic
values.
Unless you implement your own @code{transient-infix-read} method you should
@@ -1986,15 +1870,12 @@ Also see @ref{Suffix Classes}.
@item
@code{key} The key, a key vector or a key description string.
-
@item
@code{command} The command, a symbol.
-
@item
@code{transient} Whether to stay transient. See @ref{Transient State}.
-
@item
@code{format} The format used to display the suffix in the popup buffer.
It must contain the following %-placeholders:
@@ -2002,15 +1883,12 @@ It must contain the following %-placeholders:
@itemize
@item
@code{%k} For the key.
-
@item
@code{%d} For the description.
-
@item
@code{%v} For the infix value. Non-infix suffixes don't have a value.
@end itemize
-
@item
@code{description} The description, either a string or a function that is
called with no argument and returns a string.
@@ -2026,27 +1904,22 @@ They are defined here anyway to allow sharing certain
methods.
@item
@code{argument} The long argument, e.g. @code{--verbose}.
-
@item
@code{shortarg} The short argument, e.g. @code{-v}.
-
@item
@code{value} The value. Should not be accessed directly.
-
@item
@code{init-value} Function that is responsable for setting the object's
value. If bound, then this is called with the object as the only
argument. Usually this is not bound, in which case the object's
primary @code{transient-init-value} method is called instead.
-
@item
@code{unsavable} Whether the value of the suffix is not saved as part of
the prefixes.
-
@item
@code{multi-value} For options, whether the option can have multiple
values. If this is non-nil, then the values are read using
@@ -2066,7 +1939,6 @@ In the list returned by @code{transient-args} such an
option and its
values are represented by a single list of the form @code{(ARGUMENT
. VALUES)}.
-
@item
Use @code{repeat} for an option that can be specified multiple times.
@@ -2079,35 +1951,29 @@ In both cases the option's values have to be specified
in the
default value of a prefix using the same format as returned by
@code{transient-args}, e.g.: @code{("--other" "--o=1" "--o=2" ("--" "f1"
"f2"))}.
-
@item
@code{always-read} For options, whether to read a value on every invocation.
If this is nil, then options that have a value are simply unset and
have to be invoked a second time to set a new value.
-
@item
@code{allow-empty} For options, whether the empty string is a valid value.
-
@item
@code{history-key} The key used to store the history. This defaults to the
command name. This is useful when multiple infixes should share the
same history because their values are of the same kind.
-
@item
@code{reader} The function used to read the value of an infix. Not used
for switches. The function takes three arguments, PROMPT,
INITIAL-INPUT and HISTORY, and must return a string.
-
@item
@code{prompt} The prompt used when reading the value, either a string or a
function that takes the object as the only argument and which
returns a prompt string.
-
@item
@code{choices} A list of valid values. How exactly that is used depends on
the class of the object.
@@ -2129,7 +1995,6 @@ the class of the object.
@code{argument-format} The display format. Must contain @code{%s}, one of the
@code{choices} is substituted for that. E.g. @code{--%s-order}.
-
@item
@code{argument-regexp} The regexp used to match any one of the switches.
E.g. @code{\\(--\\(topo\\|author-date\\|date\\)-order\\)}.
@@ -2146,25 +2011,18 @@ what happens if you use more than one.
@itemize
@item
@code{if} Enable if predicate returns non-nil.
-
@item
@code{if-not} Enable if predicate returns nil.
-
@item
@code{if-non-nil} Enable if variable's value is non-nil.
-
@item
@code{if-nil} Enable if variable's value is nil.
-
@item
@code{if-mode} Enable if major-mode matches value.
-
@item
@code{if-not-mode} Enable if major-mode does not match value.
-
@item
@code{if-derived} Enable if major-mode derives from value.
-
@item
@code{if-not-derived} Enable if major-mode does not derive from value.
@end itemize
@@ -2195,13 +2053,10 @@ The following diagrams illustrate some of the
differences.
@itemize
@item
@code{(c)} represents a return to the command loop.
-
@item
@code{(+)} represents the user's choice to press one key or another.
-
@item
@code{@{WORD@}} are possible behaviors.
-
@item
@code{@{NUMBER@}} is a footnote.
@end itemize
@@ -2387,7 +2242,6 @@ infix arguments for future invocations. The behavior can
also be
specified for individual suffix commands and may even depend on
state.
-
@item
@code{@{2@}} Transients can be configured to allow the user to invoke
non-suffix commands. The default is to not allow that and instead
@@ -2470,7 +2324,6 @@ using the current interface:
("n" "next visible heading" outline-next-visible-heading)])
@end lisp
-
@item
Transient supports infix arguments; values that are set by infix
commands and then consumed by the invoked suffix command(s).
@@ -2490,7 +2343,6 @@ things.
The downside of this is that it becomes harder for a user to add
additional commands to an existing hydra and to change key bindings.
-
@item
Transient allows the author of a transient to organize the commands
into groups and the use of generic functions allows authors of
@@ -2585,13 +2437,8 @@ necessary changes. See its doc string for more
information.
@printindex ky
-@node Command Index
-@appendix Command Index
-
-@printindex cp
-
-@node Function Index
-@appendix Function Index
+@node Function and Command Index
+@appendix Function and Command Index
@printindex fn
- [elpa] externals/transient updated (349116159f -> 51c50d8c82), Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient 459e28e28a 03/11: Add lisp-imenu-generic-expression entry, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient e57d1e176b 05/11: make: Cosmetics, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient 129c2b1685 07/11: make: Set more variables in default.mk, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient 0695b617cc 02/11: manual: No longer use dissolvable sections, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient abbe17560c 10/11: manual: Move common settings to .orgconfig, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient daa22e7632 09/11: manual: Downcase keywords, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient f4790969fe 04/11: make: Add stats target, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient 61af234d41 06/11: make: Update stats target, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient c26cbac574 08/11: transient-{init, set}-value: Use case-sensitive matching, Jonas Bernoulli, 2021/12/26
- [elpa] externals/transient 51c50d8c82 11/11: manual: Use updated support for definition commands,
Jonas Bernoulli <=
- [elpa] externals/transient 4e8aa09b3f 01/11: transient-define-infix: Fix documentation, Jonas Bernoulli, 2021/12/26