[Emacs-diffs] /srv/bzr/emacs/trunk r106625: Fix typos.

[Juanma Barranquero]

------------------------------------------------------------
revno: 106625
committer: Juanma Barranquero <address@hidden>
branch nick: trunk
timestamp: Tue 2011-12-06 02:30:54 +0100
message:
  Fix typos.
modified:
  doc/misc/ChangeLog
  doc/misc/gnus-faq.texi
  lisp/ChangeLog
  lisp/ChangeLog.12
  lisp/ChangeLog.7
  lisp/cedet/ChangeLog
  lisp/cedet/semantic/bovine/c.el
  lisp/dired.el
  lisp/gnus/gnus-sum.el
  lisp/mh-e/ChangeLog.1
  lisp/org/ChangeLog
  lisp/org/ob-ref.el
  lisp/org/ob.el
  lisp/org/org-publish.el
  lisp/progmodes/cc-vars.el
  lisp/textmodes/table.el
  lisp/url/ChangeLog
  src/data.c
  src/font.h

=== modified file 'doc/misc/ChangeLog'
--- a/doc/misc/ChangeLog        2011-11-25 13:26:30 +0000
+++ b/doc/misc/ChangeLog        2011-12-06 01:30:54 +0000
@@ -1,3 +1,7 @@
+2011-12-06  Juanma Barranquero  <address@hidden>
+
+       * gnus-faq.texi (FAQ 2-1, FAQ 3-8, FAQ 4-14, FAQ 9-1): Fix typos.
+
 2011-11-24  Glenn Morris  <address@hidden>
 
        * gnus.texi, smtpmail.texi: Fix case of "GnuTLS".

=== modified file 'doc/misc/gnus-faq.texi'
--- a/doc/misc/gnus-faq.texi    2011-11-14 23:59:56 +0000
+++ b/doc/misc/gnus-faq.texi    2011-12-06 01:30:54 +0000
@@ -266,9 +266,9 @@
 @subsubheading Answer
 
 This message means that the last time you used Gnus, it
-wasn't properly exited and therefor couldn't write its
-informations to disk (e.g. which messages you read), you
-are now asked if you want to restore those informations
+wasn't properly exited and therefore couldn't write its
+information to disk (e.g. which messages you read), you
+are now asked if you want to restore that information
 from the auto-save file.
 
 To prevent this message make sure you exit Gnus
@@ -563,7 +563,7 @@
 it should store the mail, in Gnus terminology which back end
 to use. Gnus supports many different back ends, the most
 commonly used one is nnml. It stores every mail in one file
-and is therefor quite fast. However you might prefer a one
+and is therefore quite fast. However you might prefer a one
 file per group approach if your file system has problems with
 many small files, the nnfolder back end is then probably the
 choice for you.  To use nnml add the following to ~/.gnus.el:
@@ -580,7 +580,7 @@
 @end example
 @noindent
 
-Now we need to tell Gnus, where to get it's mail from. If
+Now we need to tell Gnus, where to get its mail from. If
 it's a POP3 server, then you need something like this:
 
 @example
@@ -1104,11 +1104,11 @@
 @subsubheading Answer
 
 You've got to play around with the variable
-gnus-summary-line-format. It's value is a string of
+gnus-summary-line-format. Its value is a string of
 symbols which stand for things like author, date, subject
 etc. A list of the available specifiers can be found in the
 manual node "Summary Buffer Lines" and the often forgotten
-node "Formatting Variables" and it's sub-nodes. There
+node "Formatting Variables" and its sub-nodes. There
 you'll find useful things like positioning the cursor and
 tabulators which allow you a summary in table form, but
 sadly hard tabulators are broken in 5.8.8.
@@ -2190,7 +2190,7 @@
 
 @subsubheading Answer
 
-The reason for this could be the way Gnus reads it's
+The reason for this could be the way Gnus reads its
 active file, see the node "The Active File" in the Gnus
 manual for things you might try to speed the process up.
 An other idea would be to byte compile your ~/.gnus.el (say

=== modified file 'lisp/ChangeLog'
--- a/lisp/ChangeLog    2011-12-05 22:22:15 +0000
+++ b/lisp/ChangeLog    2011-12-06 01:30:54 +0000
@@ -1,3 +1,7 @@
+2011-12-06  Juanma Barranquero  <address@hidden>
+
+       * textmodes/table.el (table-shorten-cell): Fix typo.
+
 2011-12-05  Christopher Genovese  <address@hidden>  (tiny change)
 
        * emacs-lisp/assoc.el (aput): Fix return value (bug#10146)

=== modified file 'lisp/ChangeLog.12'
--- a/lisp/ChangeLog.12 2011-12-04 08:02:42 +0000
+++ b/lisp/ChangeLog.12 2011-12-06 01:30:54 +0000
@@ -6278,7 +6278,7 @@
        Register changes using allout-exposure-change-hook.
        Disregard aberrant topics.
        (allout-shift-in): With universal-argument, make topic a peer of
-       it's former offspring.  Simplify the code by separating out
+       its former offspring.  Simplify the code by separating out
        allout-shift-out functionality.
        (allout-shift-out): With universal-argument, make offspring peers
        of their former container, and its siblings.  Implement the

=== modified file 'lisp/ChangeLog.7'
--- a/lisp/ChangeLog.7  2011-12-04 08:02:42 +0000
+++ b/lisp/ChangeLog.7  2011-12-06 01:30:54 +0000
@@ -12129,7 +12129,7 @@
 
        * cc-mode.el (c-buffer-is-cc-mode):
        Definition moved here from cc-vars.el.  Also,
-       put permanent-local property on variable so it's value won't get
+       put permanent-local property on variable so its value won't get
        killed by kill-all-local-variables.
 
        * cc-mode.el (c++-mode, java-mode, objc-mode, idl-mode):
@@ -19534,7 +19534,7 @@
        the innermost test.  This catches GNU-style comments.
 
        * cc-mode.el (c-add-syntax):
-       Move macro definition to before it's first use.
+       Move macro definition to before its first use.
 
        * cc-mode.el (c-submit-bug-report):
        Capture buffer local variable values which are

=== modified file 'lisp/cedet/ChangeLog'
--- a/lisp/cedet/ChangeLog      2011-11-26 06:28:10 +0000
+++ b/lisp/cedet/ChangeLog      2011-12-06 01:30:54 +0000
@@ -1,3 +1,7 @@
+2011-12-06  Juanma Barranquero  <address@hidden>
+
+       * semantic/bovine/c.el (semantic-tag-abstract-p): Fix typo.
+
 2011-11-26  Chong Yidong  <address@hidden>
 
        * semantic/wisent/python-wy.el:

=== modified file 'lisp/cedet/semantic/bovine/c.el'
--- a/lisp/cedet/semantic/bovine/c.el   2011-11-24 01:58:14 +0000
+++ b/lisp/cedet/semantic/bovine/c.el   2011-12-06 01:30:54 +0000
@@ -816,7 +816,7 @@
     ;;
     ;; will create 2 toplevel tags, one is type A, and the other variable B
     ;; where the :type of B is just a type tag A that is a prototype, and
-    ;; the actual struct info of A is it's own toplevel tag.
+    ;; the actual struct info of A is its own toplevel tag.
     (when (or (semantic-tag-of-class-p tag 'function)
              (semantic-tag-of-class-p tag 'variable))
       (let* ((basetype (semantic-tag-type tag))
@@ -1311,7 +1311,7 @@
   "Return non-nil if TAG is considered abstract.
 PARENT is tag's parent.
 In C, a method is abstract if it is `virtual', which is already
-handled.  A class is abstract iff it's destructor is virtual."
+handled.  A class is abstract iff its destructor is virtual."
   (cond
    ((eq (semantic-tag-class tag) 'type)
     (require 'semantic/find)

=== modified file 'lisp/dired.el'
--- a/lisp/dired.el     2011-12-05 08:55:25 +0000
+++ b/lisp/dired.el     2011-12-06 01:30:54 +0000
@@ -2678,7 +2678,7 @@
 (defvar dired-re-no-dot "^\\([^.]\\|\\.\\([^.]\\|\\..\\)\\).*")
 
 ;; Delete file, possibly delete a directory and all its files.
-;; This function is useful outside of dired.  One could change it's name
+;; This function is useful outside of dired.  One could change its name
 ;; to e.g. recursive-delete-file and put it somewhere else.
 (defun dired-delete-file (file &optional recursive trash) "\
 Delete FILE or directory (possibly recursively if optional RECURSIVE is true.)

=== modified file 'lisp/gnus/gnus-sum.el'
--- a/lisp/gnus/gnus-sum.el     2011-12-04 08:02:42 +0000
+++ b/lisp/gnus/gnus-sum.el     2011-12-06 01:30:54 +0000
@@ -2969,7 +2969,7 @@
                                        'gnus-summary-mode-map)))
       (when map
        ;; Need to set `gnus-summary-tool-bar-map' because `gnus-article-mode'
-       ;; uses it's value.
+       ;; uses its value.
        (setq gnus-summary-tool-bar-map map))))
   (set (make-local-variable 'tool-bar-map) gnus-summary-tool-bar-map))
 

=== modified file 'lisp/mh-e/ChangeLog.1'
--- a/lisp/mh-e/ChangeLog.1     2011-11-27 04:43:11 +0000
+++ b/lisp/mh-e/ChangeLog.1     2011-12-06 01:30:54 +0000
@@ -428,7 +428,7 @@
 2004-11-08  Satyaki Das  <address@hidden>
 
        * mh-acros.el (mh-funcall-if-exists): In XEmacs, presence of a
-       function at compile time doesn't guarantee it's existence at run
+       function at compile time doesn't guarantee its existence at run
        time. So make the macro handle that situation better.
 
 2004-11-05  Satyaki Das  <address@hidden>
@@ -10195,7 +10195,7 @@
 2002-04-02  Peter S Galbraith  <address@hidden>
 
        * mh-e.el: 'defvar mh-folder-unseen-seq-name' called a function to
-       set it's value, and this happens also on byte-compilation (where
+       set its value, and this happens also on byte-compilation (where
        it can fail if the user's MH environment is not setup correctly).
        I now set the value of mh-folder-unseen-seq-name at runtime when I
        first need it.  This should fix Debian bugs

=== modified file 'lisp/org/ChangeLog'
--- a/lisp/org/ChangeLog        2011-12-04 08:02:42 +0000
+++ b/lisp/org/ChangeLog        2011-12-06 01:30:54 +0000
@@ -1,3 +1,8 @@
+2011-12-06  Juanma Barranquero  <address@hidden>
+
+       * ob.el (org-babel-expand-body:generic, org-babel-number-p):
+       * ob-ref.el (org-babel-ref-parse): Fix typos.
+
 2011-11-24  Juanma Barranquero  <address@hidden>
 
        * ob.el (org-babel-execute-src-block): Fix typo.

=== modified file 'lisp/org/ob-ref.el'
--- a/lisp/org/ob-ref.el        2011-09-02 16:38:40 +0000
+++ b/lisp/org/ob-ref.el        2011-12-06 01:30:54 +0000
@@ -69,7 +69,7 @@
   "Parse a variable ASSIGNMENT in a header argument.
 If the right hand side of the assignment has a literal value
 return that value, otherwise interpret as a reference to an
-external resource and find it's value using
+external resource and find its value using
 `org-babel-ref-resolve'.  Return a list with two elements.  The
 first element of the list will be the name of the variable, and
 the second will be an emacs-lisp representation of the value of

=== modified file 'lisp/org/ob.el'
--- a/lisp/org/ob.el    2011-11-24 01:58:14 +0000
+++ b/lisp/org/ob.el    2011-12-06 01:30:54 +0000
@@ -464,7 +464,7 @@
 
 (defun org-babel-expand-body:generic (body params &optional var-lines)
   "Expand BODY with PARAMS.
-Expand a block of code with org-babel according to it's header
+Expand a block of code with org-babel according to its header
 arguments.  This generic implementation of body expansion is
 called for languages which have not defined their own specific
 org-babel-expand-body:lang function."
@@ -2045,7 +2045,7 @@
     cell))
 
 (defun org-babel-number-p (string)
-  "If STRING represents a number return it's value."
+  "If STRING represents a number return its value."
   (if (and (string-match "^-?[0-9]*\\.?[0-9]*$" string)
            (= (length (substring string (match-beginning 0)
                                 (match-end 0)))

=== modified file 'lisp/org/org-publish.el'
--- a/lisp/org/org-publish.el   2011-12-04 08:02:42 +0000
+++ b/lisp/org/org-publish.el   2011-12-06 01:30:54 +0000
@@ -715,7 +715,7 @@
 If :makeindex is set, also produce a file theindex.org."
   (mapc
    (lambda (project)
-     ;; Each project uses it's own cache file:
+     ;; Each project uses its own cache file:
      (org-publish-initialize-cache (car project))
      (let*
         ((project-plist (cdr project))

=== modified file 'lisp/progmodes/cc-vars.el'
--- a/lisp/progmodes/cc-vars.el 2011-11-19 09:18:31 +0000
+++ b/lisp/progmodes/cc-vars.el 2011-12-06 01:30:54 +0000
@@ -586,7 +586,7 @@
 afterwards to redo that work."
   ;; Symbols other than those documented above may be used on this
   ;; variable.  If a variable exists that has that name with
-  ;; "-font-lock-keywords" appended, it's value is prepended to the
+  ;; "-font-lock-keywords" appended, its value is prepended to the
   ;; font lock keywords list.  If it's a function then it's called and
   ;; the result is prepended.
   :type '(radio

=== modified file 'lisp/textmodes/table.el'
--- a/lisp/textmodes/table.el   2011-12-04 08:02:42 +0000
+++ b/lisp/textmodes/table.el   2011-12-06 01:30:54 +0000
@@ -345,7 +345,7 @@
 ;; Above code is well known ~/.emacs idiom for customizing a mode
 ;; specific keymap however it does not work for this package.  This is
 ;; because there is no table mode in effect.  This package does not
-;; use a local map therefor you must modify `table-cell-map'
+;; use a local map therefore you must modify `table-cell-map'
 ;; explicitly.  The correct way of achieving above task is:
 ;;
 ;;   (add-hook 'table-cell-map-hook
@@ -2155,7 +2155,7 @@
 (defun table-shorten-cell (n)
   "Shorten the current cell by N lines by shrinking the cell vertically.
 Shortening is done by removing blank lines from the bottom of the cell
-and possibly from the top of the cell as well.  Therefor, the cell
+and possibly from the top of the cell as well.  Therefore, the cell
 must have some bottom/top blank lines to be shorten effectively.  This
 is applicable to all the cells aligned horizontally with the current
 one because they are also shortened in order to keep the rectangular

=== modified file 'lisp/url/ChangeLog'
--- a/lisp/url/ChangeLog        2011-12-04 08:02:42 +0000
+++ b/lisp/url/ChangeLog        2011-12-06 01:30:54 +0000
@@ -2448,7 +2448,7 @@
        * lisp/url-nfs.el (url-nfs-create-wrapper): New function to create
        wrappers onto the appropriate file-based URLs for file-name-handlers.
 
-       * lisp/url-ftp.el: Moved the FTP stuff into it's own file - it
+       * lisp/url-ftp.el: Moved the FTP stuff into its own file - it
        might get messy with file-name-handlers and things.
 
        * lisp/url-http.el (url-http-clean-headers): Fix problem when

=== modified file 'src/data.c'
--- a/src/data.c        2011-11-14 20:23:26 +0000
+++ b/src/data.c        2011-12-06 01:30:54 +0000
@@ -839,7 +839,7 @@
 
     case Lisp_Fwd_Kboard_Obj:
       /* We used to simply use current_kboard here, but from Lisp
-        code, it's value is often unexpected.  It seems nicer to
+        code, its value is often unexpected.  It seems nicer to
         allow constructions like this to work as intuitively expected:
 
         (with-selected-frame frame

=== modified file 'src/font.h'
--- a/src/font.h        2011-11-15 07:55:13 +0000
+++ b/src/font.h        2011-12-06 01:30:54 +0000
@@ -705,7 +705,7 @@
 
 
 /* Chain of font drivers.  There's one global font driver list
-   (font_driver_list in font.c).  In addition, each frame has it's own
+   (font_driver_list in font.c).  In addition, each frame has its own
    font driver list at FRAME_PTR->font_driver_list.  */
 
 struct font_driver_list
@@ -721,7 +721,7 @@
 
 
 /* Chain of arbitrary data specific to each font driver.  Each frame
-   has it's own font data list at FRAME_PTR->font_data_list.  */
+   has its own font data list at FRAME_PTR->font_data_list.  */
 
 struct font_data_list
 {