[Emacs-diffs] Changes to src/m/gould.h

[Dan Nicolaescu]

CVSROOT:        /cvsroot/emacs
Module name:    emacs
Changes by:     Dan Nicolaescu <dann>   08/01/06 00:56:56

Index: src/m/gould.h
===================================================================
RCS file: src/m/gould.h
diff -N src/m/gould.h
--- src/m/gould.h       13 Aug 2007 13:40:53 -0000      1.17
+++ /dev/null   1 Jan 1970 00:00:00 -0000
@@ -1,189 +0,0 @@
-/* machine description file for Gould PowerNodes with UTX/32 2.0 and 2.1.
-   (See MACHINES for older versions.)
-
-* NOTE: If you are running a pre-release of UTX/32 2.1 you should #define
-* RELEASE2_1 in config.h. This may also be necessary with un-updated
-* official releases of 2.1
-
-   Copyright (C) 1986, 2002, 2003, 2004, 2005,
-                 2006, 2007 Free Software Foundation, Inc.
-
-This file is part of GNU Emacs.
-
-GNU Emacs is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 3, or (at your option)
-any later version.
-
-GNU Emacs is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU Emacs; see the file COPYING.  If not, write to
-the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-Boston, MA 02110-1301, USA.  */
-
-
-/* The following line tells the configuration script what sort of
-   operating system this machine is likely to run.
-   USUAL-OPSYS="note"
-
-NOTE-START
-Gould Power Node (-machine=gould -opsystem=bsd4-2 or bsd4-3)
-(gould.h; s-bsd4-2.h or s-bsd4-3.h)
-
-  18.36 worked on versions 1.2 and 2.0 of the operating system.
-
-  On UTX/32 2.0, use -opsystem=bsd4-3
-
-  On UTX/32 1.2 and UTX/32S 1.0, use -opsystem=bsd4-2 and note that compiling
-  lib-src/sorted-doc tickles a compiler bug:  remove the -g flag to cc in the
-  makefile.
-
-  UTX/32 1.3 has a bug in the bcopy library routine.  Fix it by
-  #undef BSTRING in gould.h.
-
-  Version 19 incorporates support for releases 2.1 and later of UTX/32.
-  A site running a pre-release of 2.1 should #define RELEASE2_1 in config.h.
-NOTE-END */
-
-/* Define WORDS_BIG_ENDIAN if lowest-numbered byte in a word
-   is the most significant byte.  */
-
-#define WORDS_BIG_ENDIAN
-
-/* Define NO_ARG_ARRAY if you cannot take the address of the first of a
- * group of arguments and treat it as an array of the arguments.  */
-
-#define NO_ARG_ARRAY
-
-/* Define WORD_MACHINE if addresses and such have
- * to be corrected before they can be used as byte counts.  */
-
-/* #define WORD_MACHINE */
-
-/* Now define a symbol for the cpu type, if your compiler
-   does not define it automatically */
-
-#ifndef GOULD
-#define GOULD
-#endif
-
-/* sel is an old preprocessor name on gould machines
-  - it is no longer needed and interferes with a variable in xmenu.c */
-#undef sel
-
-/* Use type int rather than a union, to represent Lisp_Object */
-/* This is desirable for most machines.  */
-
-#define NO_UNION_TYPE
-
-/* Define EXPLICIT_SIGN_EXTEND if XINT must explicitly sign-extend
-   the 24-bit bit field into an int.  In other words, if bit fields
-   are always unsigned.
-
-   If you use NO_UNION_TYPE, this flag does not matter.  */
-
-#define EXPLICIT_SIGN_EXTEND
-
-/* Data type of load average, as read out of kmem.  */
-
-#define LOAD_AVE_TYPE double
-
-/* Convert that into an integer that is 100 for a load average of 1.0  */
-
-#define LOAD_AVE_CVT(x) (int) (((double) (x)) * 100.0)
-
-/* Define CANNOT_DUMP on machines where unexec does not work.
-   Then the function dump-emacs will not be defined
-   and temacs will do (load "loadup") automatically unless told otherwise.  */
-
-/* #define CANNOT_DUMP */
-
-/* Define VIRT_ADDR_VARIES if the virtual addresses of
-   pure and impure space as loaded can vary, and even their
-   relative order cannot be relied on.
-
-   Otherwise Emacs assumes that text space precedes data space,
-   numerically.  */
-
-#define VIRT_ADDR_VARIES
-
-/* No need to extend the user stack. */
-
-/* If this is a 2.1 system, COFF will be predefined by cpp. If it's */
-/* pre-2.1 COFF won't be defined, which is as it should be. */
-
-#ifdef COFF
-
-#define HEADER_INCL_IN_TEXT
-#define COFF_BSD_SYMBOLS
-
-/* Seems to be necessary with coff */
-#define NO_REMAP
-
-#ifndef GOULD_NP1
-/* gould-np1.h includes this file */
-/* keep the old value - don't skip over the headers */
-#define KEEP_OLD_TEXT_SCNPTR
-#define KEEP_OLD_PADDR
-#ifndef RELEASE2_1
-#define ADJUST_TEXTBASE
-#endif /*RELEASE2_1*/
-#endif /* GOULD_NP1 */
-
-#ifdef IN_UNEXEC
-/* make Gould NP and PN COFF look like USG COFF */
-/* PN COFF */
-#define aouthdr old_exec
-/* PN COFF doesn't have a data_start or a_dtbase field in its */
-/* optional header, so substitute a junk field */
-#define a_dtbase a_ccvers
-/* Gould COFF */
-#define magic a_magic
-#define tsize a_text
-#define dsize a_data
-#define bsize a_bss
-#define entry a_entry
-#define text_start a_txbase
-#define data_start a_dtbase
-#endif /* IN_UNEXEC */
-
-/* Define how to search all pty names.
- * This is for UTX 2.1 and greater on PN and all NP versions. It is only
- * accident that this happens to correspond to the same versions of UTX
- * as COFF does, but we'll take advantage of that here.
- */
-
-/*#define USE_PTY_PAIR*/
-
-#endif /* COFF */
-
-/* -g is sometimes broken on the Gould.  */
-
-#define C_DEBUG_SWITCH
-
-/* Comparing pointers as unsigned ints tickles a bug in older compilers.  */
-
-#define PNTR_COMPARISON_TYPE int
-
-/* The GOULD machine counts the a.out file header as part of the text.  */
-
-#define A_TEXT_OFFSET(HDR) sizeof (HDR)
-
-/* Machine-dependent action when about to dump an executable file.  */
-
-#ifndef COFF
-#define ADJUST_EXEC_HEADER   \
-  unexec_text_start = hdr.a_txbase + sizeof (hdr);
-#endif
-
-/* We use the system's crt0.o.  Somehow it avoids losing
-   with `environ' the way most standard crt0.o's do.  */
-
-#define START_FILES pre-crt0.o /lib/crt0.o
-
-/* arch-tag: 930cb9ef-f56f-4c06-aea0-5e81103bbf58
-   (do not change this comment) */