[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/lisp/progmodes/cc-align.el
From: |
Alan Mackenzie |
Subject: |
[Emacs-diffs] Changes to emacs/lisp/progmodes/cc-align.el |
Date: |
Fri, 02 Dec 2005 07:30:36 -0500 |
Index: emacs/lisp/progmodes/cc-align.el
diff -c emacs/lisp/progmodes/cc-align.el:1.27
emacs/lisp/progmodes/cc-align.el:1.28
*** emacs/lisp/progmodes/cc-align.el:1.27 Mon Aug 1 08:37:49 2005
--- emacs/lisp/progmodes/cc-align.el Fri Dec 2 12:30:35 2005
***************
*** 45,63 ****
(cc-require 'cc-engine)
! ;; Standard indentation line-ups
!
! ;; Calling convention:
! ;;
! ;; The single argument is a cons cell containing the syntactic symbol
! ;; in the car, and the relpos (a.k.a. anchor position) in the cdr.
! ;; The cdr may be nil for syntactic symbols which doesn't have an
! ;; associated relpos.
;;
! ;; Some syntactic symbols provide more information, usually more
! ;; interesting positions. The complete list for the syntactic element
! ;; (beginning with the symbol itself) is available in
! ;; `c-syntactic-element'.
(defun c-lineup-topmost-intro-cont (langelem)
"Line up declaration continuation lines zero or one indentation step.
--- 45,54 ----
(cc-require 'cc-engine)
! ;; Standard line-up functions
;;
! ;; See the section "Custom Indentation Functions" in the manual for
! ;; details on the calling convention.
(defun c-lineup-topmost-intro-cont (langelem)
"Line up declaration continuation lines zero or one indentation step.
***************
*** 91,107 ****
Works with: topmost-intro-cont."
(save-excursion
(beginning-of-line)
! (c-backward-syntactic-ws (cdr langelem))
! (if (memq (char-before) '(?} ?,))
c-basic-offset)))
(defun c-lineup-arglist (langelem)
"Line up the current argument line under the first argument.
! As a special case, if an argument on the same line as the open
! parenthesis starts with a brace block opener, the indentation is
! `c-basic-offset' only. This is intended as a \"DWIM\" measure in
! cases like macros that contains statement blocks, e.g:
A_VERY_LONG_MACRO_NAME ({
some (code, with + long, lines * in[it]);
--- 82,148 ----
Works with: topmost-intro-cont."
(save-excursion
(beginning-of-line)
! (c-backward-syntactic-ws (c-langelem-pos langelem))
! (if (and (memq (char-before) '(?} ?,))
! (not (and c-overloadable-operators-regexp
! (c-after-special-operator-id))))
c-basic-offset)))
+ (defun c-block-in-arglist-dwim (arglist-start)
+ ;; This function implements the DWIM to avoid far indentation of
+ ;; brace block constructs in arguments in `c-lineup-arglist' etc.
+ ;; Return non-nil if a brace block construct is detected within the
+ ;; arglist starting at ARGLIST-START.
+
+ (or
+ ;; Check if the syntactic context contains any of the symbols for
+ ;; in-expression constructs. This can both save the work that we
+ ;; have to do below, and it also detect the brace list constructs
+ ;; that `c-looking-at-inexpr-block' currently misses (they are
+ ;; recognized by `c-inside-bracelist-p' instead).
+ (assq 'inexpr-class c-syntactic-context)
+ (assq 'inexpr-statement c-syntactic-context)
+ (assq 'inlambda c-syntactic-context)
+
+ (save-restriction
+ ;; Search for open braces from the arglist start to the end of the
+ ;; line.
+ (narrow-to-region arglist-start (c-point 'eol arglist-start))
+
+ (goto-char arglist-start)
+ (while (and (c-syntactic-re-search-forward "{" nil t)
+ (progn
+ (backward-char)
+ (or
+ ;; Ignore starts of special brace lists.
+ (and c-special-brace-lists
+ (save-restriction
+ (widen)
+ (c-looking-at-special-brace-list)))
+ ;; Ignore complete blocks.
+ (c-safe (c-forward-sexp) t))))
+ (forward-char))
+
+ (looking-at "{"))
+
+ (let (containing-sexp)
+ (goto-char arglist-start)
+ ;; `c-syntactic-eol' always matches somewhere on the line.
+ (re-search-forward c-syntactic-eol)
+ (goto-char (match-beginning 0))
+ (c-forward-syntactic-ws)
+ (setq containing-sexp (c-most-enclosing-brace (c-parse-state)))
+ (c-looking-at-inexpr-block
+ (c-safe-position (or containing-sexp (point)) c-state-cache)
+ containing-sexp))))
+
(defun c-lineup-arglist (langelem)
"Line up the current argument line under the first argument.
! As a special case, if the indented line is inside a brace block
! construct, the indentation is `c-basic-offset' only. This is intended
! as a \"DWIM\" measure in cases like macros that contains statement
! blocks, e.g:
A_VERY_LONG_MACRO_NAME ({
some (code, with + long, lines * in[it]);
***************
*** 115,152 ****
Works with: arglist-cont-nonempty, arglist-close."
(save-excursion
! (goto-char (1+ (elt c-syntactic-element 2)))
! ;; Don't stop in the middle of a special brace list opener
! ;; like "({".
! (when c-special-brace-lists
! (let ((special-list (c-looking-at-special-brace-list)))
! (when (and special-list (< (car (car special-list)) (point)))
! (goto-char (+ (car (car special-list)) 2)))))
!
! (let ((savepos (point))
! (eol (c-point 'eol)))
!
! ;; Find out if an argument on the same line starts with an
! ;; unclosed open brace paren. Note similar code in
! ;; `c-lineup-close-paren' and
! ;; `c-lineup-arglist-close-under-paren'.
! (if (and (c-syntactic-re-search-forward "{" eol t t)
! (looking-at c-syntactic-eol)
! (progn (backward-char)
! (not (c-looking-at-special-brace-list)))
! (progn (c-backward-syntactic-ws)
! (or (= (point) savepos)
! (eq (char-before) ?,))))
! c-basic-offset
;; Normal case. Indent to the token after the arglist open paren.
! (goto-char savepos)
! (c-forward-syntactic-ws)
! (when (< (point) eol)
! (goto-char savepos)
! (skip-chars-forward " \t"))
! (vector (current-column))))))
;; Contributed by Kevin Ryde <address@hidden>.
(defun c-lineup-argcont (elem)
--- 156,180 ----
Works with: arglist-cont-nonempty, arglist-close."
(save-excursion
! (let ((indent-pos (point)))
! (if (c-block-in-arglist-dwim (c-langelem-2nd-pos c-syntactic-element))
! c-basic-offset ; DWIM case.
;; Normal case. Indent to the token after the arglist open paren.
! (goto-char (c-langelem-2nd-pos c-syntactic-element))
! (if (and c-special-brace-lists
! (c-looking-at-special-brace-list))
! ;; Skip a special brace list opener like "({".
! (progn (c-forward-token-2)
! (forward-char))
! (forward-char))
! (let ((arglist-content-start (point)))
! (c-forward-syntactic-ws)
! (when (< (point) indent-pos)
! (goto-char arglist-content-start)
! (skip-chars-forward " \t"))
! (vector (current-column)))))))
;; Contributed by Kevin Ryde <address@hidden>.
(defun c-lineup-argcont (elem)
***************
*** 172,178 ****
;; isn't, go back to the last position in it. We do this by
;; stepping back over open parens until we get to the open paren
;; of our argument list.
! (let ((open-paren (elt c-syntactic-element 2))
(paren-state (c-parse-state)))
(while (not (eq (car paren-state) open-paren))
(unless (consp (car paren-state)) ;; ignore matched braces
--- 200,206 ----
;; isn't, go back to the last position in it. We do this by
;; stepping back over open parens until we get to the open paren
;; of our argument list.
! (let ((open-paren (c-langelem-2nd-pos c-syntactic-element))
(paren-state (c-parse-state)))
(while (not (eq (car paren-state) open-paren))
(unless (consp (car paren-state)) ;; ignore matched braces
***************
*** 233,283 ****
arglist-cont-nonempty to line up all lines inside a parenthesis under
the open paren.
! As a special case, if a brace block is opened at the same line as the
! open parenthesis of the argument list, the indentation is
`c-basic-offset' only. See `c-lineup-arglist' for further discussion
of this \"DWIM\" measure.
Works with: Almost all symbols, but are typically most useful on
arglist-close, brace-list-close, arglist-cont and arglist-cont-nonempty."
(save-excursion
! (let (special-list paren-start savepos)
! (if (memq (car langelem) '(arglist-cont-nonempty arglist-close))
! (goto-char (elt c-syntactic-element 2))
! (beginning-of-line)
! (c-go-up-list-backward))
! (if (and c-special-brace-lists
! (setq special-list (c-looking-at-special-brace-list)))
! ;; Don't stop in the middle of a special brace list opener
! ;; like "({".
! (progn
! (setq paren-start (car (car special-list)))
! (goto-char (+ paren-start 2)))
! (setq paren-start (point))
! (forward-char 1))
!
! (setq savepos (point))
! ;; Find out if an argument on the same line starts with an
! ;; unclosed open brace paren. Note similar code in
! ;; `c-lineup-arglist' and `c-lineup-close-paren'.
! (if (and (c-syntactic-re-search-forward "{" (c-point 'eol) t t)
! (looking-at c-syntactic-eol)
! (progn (backward-char)
! (not (c-looking-at-special-brace-list)))
! (progn (c-backward-syntactic-ws)
! (or (= (point) savepos)
! (eq (char-before) ?,))))
! c-basic-offset
! ;; Normal case. Indent to the arglist open paren.
! (goto-char paren-start)
(vector (current-column))))))
(defun c-lineup-arglist-operators (langelem)
"Line up lines starting with an infix operator under the open paren.
Return nil on lines that don't start with an operator, to leave those
! cases to other lineup functions. Example:
if ( x < 10
|| at_limit (x, <- c-lineup-arglist-operators
--- 261,296 ----
arglist-cont-nonempty to line up all lines inside a parenthesis under
the open paren.
! As a special case, if a brace block construct starts at the same line
! as the open parenthesis of the argument list, the indentation is
`c-basic-offset' only. See `c-lineup-arglist' for further discussion
of this \"DWIM\" measure.
Works with: Almost all symbols, but are typically most useful on
arglist-close, brace-list-close, arglist-cont and arglist-cont-nonempty."
(save-excursion
! (if (memq (c-langelem-sym langelem)
! '(arglist-cont-nonempty arglist-close))
! (goto-char (c-langelem-2nd-pos c-syntactic-element))
! (beginning-of-line)
! (c-go-up-list-backward))
! (if (save-excursion (c-block-in-arglist-dwim (point)))
! c-basic-offset ; DWIM case.
! ;; Normal case. Indent to the arglist open paren.
! (let (special-list)
! (if (and c-special-brace-lists
! (setq special-list (c-looking-at-special-brace-list)))
! ;; Cope if we're in the middle of a special brace list
! ;; opener like "({".
! (goto-char (car (car special-list))))
(vector (current-column))))))
(defun c-lineup-arglist-operators (langelem)
"Line up lines starting with an infix operator under the open paren.
Return nil on lines that don't start with an operator, to leave those
! cases to other line-up functions. Example:
if ( x < 10
|| at_limit (x, <- c-lineup-arglist-operators
***************
*** 285,291 ****
)
Since this function doesn't do anything for lines without an infix
! operator you typically want to use it together with some other lineup
settings, e.g. as follows \(the arglist-close setting is just a
suggestion to get a consistent style):
--- 298,304 ----
)
Since this function doesn't do anything for lines without an infix
! operator you typically want to use it together with some other line-up
settings, e.g. as follows \(the arglist-close setting is just a
suggestion to get a consistent style):
***************
*** 310,361 ****
char ** int, char **
) <-> ) <- c-lineup-close-paren
! As a special case, if a brace block is opened at the same line as the
! open parenthesis of the argument list, the indentation is
`c-basic-offset' instead of the open paren column. See
`c-lineup-arglist' for further discussion of this \"DWIM\" measure.
Works with: All *-close symbols."
(save-excursion
! (beginning-of-line)
! (c-go-up-list-backward)
!
! (let ((spec (c-looking-at-special-brace-list)) savepos argstart)
! (if spec (goto-char (car (car spec))))
! (setq savepos (point))
! (forward-char 1)
! (when spec
! (c-forward-syntactic-ws)
! (forward-char 1))
!
! (if (looking-at c-syntactic-eol)
! ;; The arglist is "empty".
! 0
!
! ;; Find out if an argument on the same line starts with an
! ;; unclosed open brace paren. Note similar code in
! ;; `c-lineup-arglist' and
! ;; `c-lineup-arglist-close-under-paren'.
! (setq argstart (point))
! (if (and (c-syntactic-re-search-forward "{" (c-point 'eol) t t)
! (looking-at c-syntactic-eol)
! (progn (backward-char)
! (not (c-looking-at-special-brace-list)))
! (progn (c-backward-syntactic-ws)
! (or (= (point) argstart)
! (eq (char-before) ?,))))
! c-basic-offset
! ;; Normal case. Indent to the arglist open paren.
! (goto-char savepos)
! (vector (current-column)))))))
(defun c-lineup-streamop (langelem)
"Line up C++ stream operators under each other.
Works with: stream-op."
(save-excursion
! (goto-char (cdr langelem))
(re-search-forward "<<\\|>>" (c-point 'eol) 'move)
(goto-char (match-beginning 0))
(vector (current-column))))
--- 323,370 ----
char ** int, char **
) <-> ) <- c-lineup-close-paren
! As a special case, if a brace block construct starts at the same line
! as the open parenthesis of the argument list, the indentation is
`c-basic-offset' instead of the open paren column. See
`c-lineup-arglist' for further discussion of this \"DWIM\" measure.
Works with: All *-close symbols."
(save-excursion
! (if (memq (c-langelem-sym langelem)
! '(arglist-cont-nonempty arglist-close))
! (goto-char (c-langelem-2nd-pos c-syntactic-element))
! (beginning-of-line)
! (c-go-up-list-backward))
! (let (special-list arglist-start)
! (if (and c-special-brace-lists
! (setq special-list (c-looking-at-special-brace-list)))
! ;; Cope if we're in the middle of a special brace list
! ;; opener like "({".
! (progn
! (goto-char (setq arglist-start (car (car special-list))))
! (c-forward-token-2)
! (forward-char))
! (setq arglist-start (point))
! (forward-char))
!
! (cond ((looking-at c-syntactic-eol)
! 0) ; The arglist is "empty".
!
! ((c-block-in-arglist-dwim (point))
! c-basic-offset) ; DWIM case.
!
! (t
! ;; Normal case. Indent to the arglist open paren.
! (goto-char arglist-start)
! (vector (current-column)))))))
(defun c-lineup-streamop (langelem)
"Line up C++ stream operators under each other.
Works with: stream-op."
(save-excursion
! (goto-char (c-langelem-pos langelem))
(re-search-forward "<<\\|>>" (c-point 'eol) 'move)
(goto-char (match-beginning 0))
(vector (current-column))))
***************
*** 382,388 ****
(let* ((eol (c-point 'eol))
(here (point))
(char-after-ip (char-after)))
! (if (cdr langelem) (goto-char (cdr langelem)))
;; This kludge is necessary to support both inher-cont and
;; member-init-cont, since they have different anchor positions.
--- 391,398 ----
(let* ((eol (c-point 'eol))
(here (point))
(char-after-ip (char-after)))
! (if (c-langelem-pos langelem)
! (goto-char (c-langelem-pos langelem)))
;; This kludge is necessary to support both inher-cont and
;; member-init-cont, since they have different anchor positions.
***************
*** 415,421 ****
Works with: inher-cont."
(save-excursion
! (goto-char (cdr langelem))
(forward-word 1)
(if (looking-at "[ \t]*$")
c-basic-offset
--- 425,431 ----
Works with: inher-cont."
(save-excursion
! (goto-char (c-langelem-pos langelem))
(forward-word 1)
(if (looking-at "[ \t]*$")
c-basic-offset
***************
*** 439,445 ****
(save-excursion
(let* ((lim (1- (c-point 'bol)))
(throws (catch 'done
! (goto-char (cdr langelem))
(while (zerop (c-forward-token-2 1 t lim))
(if (looking-at "throws\\>[^_]")
(throw 'done t))))))
--- 449,455 ----
(save-excursion
(let* ((lim (1- (c-point 'bol)))
(throws (catch 'done
! (goto-char (c-langelem-pos langelem))
(while (zerop (c-forward-token-2 1 t lim))
(if (looking-at "throws\\>[^_]")
(throw 'done t))))))
***************
*** 537,549 ****
;; matches comment-start-skip, and choose whichever is
;; longest.
(max (save-excursion
! (goto-char (1+ (cdr langelem)))
(if (and (match-string 0)
(looking-at (regexp-quote (match-string 0))))
(- (match-end 0) (match-beginning 0))
0))
(save-excursion
! (goto-char (cdr langelem))
(looking-at comment-start-skip)
(- (or (match-end 1)
(save-excursion
--- 547,559 ----
;; matches comment-start-skip, and choose whichever is
;; longest.
(max (save-excursion
! (goto-char (1+ (c-langelem-pos langelem)))
(if (and (match-string 0)
(looking-at (regexp-quote (match-string 0))))
(- (match-end 0) (match-beginning 0))
0))
(save-excursion
! (goto-char (c-langelem-pos langelem))
(looking-at comment-start-skip)
(- (or (match-end 1)
(save-excursion
***************
*** 557,570 ****
;; a nonempty comment prefix. Treat it as free form text
;; and don't change the indentation.
(vector (current-column))
! (forward-line -1)
! (back-to-indentation)
! (if (>= (cdr langelem) (point))
! ;; On the second line in the comment.
(if (zerop prefixlen)
;; No nonempty comment prefix. Align after comment
;; starter.
(progn
(goto-char (match-end 0))
;; The following should not be necessary, since
;; comment-start-skip should match everything (i.e.
--- 567,586 ----
;; a nonempty comment prefix. Treat it as free form text
;; and don't change the indentation.
(vector (current-column))
! ;; Go back to the previous non-blank line, if any.
! (while
! (progn
! (forward-line -1)
! (back-to-indentation)
! (and (> (point) (c-langelem-pos langelem))
! (looking-at "[ \t]*$"))))
! ;; Is the starting line the first continuation line with content?
! (if (>= (c-langelem-pos langelem) (point))
(if (zerop prefixlen)
;; No nonempty comment prefix. Align after comment
;; starter.
(progn
+ (looking-at comment-start-skip)
(goto-char (match-end 0))
;; The following should not be necessary, since
;; comment-start-skip should match everything (i.e.
***************
*** 580,606 ****
;; Javadoc style comments.
(if (> starterlen prefixlen)
(progn
! (goto-char (cdr langelem))
(vector (1+ (current-column))))
! (goto-char (+ (cdr langelem) starterlen 1))
(vector (- (current-column) prefixlen))))
! ;; Not on the second line in the comment. If the previous
! ;; line has a nonempty comment prefix, align with it.
! ;; Otherwise, align with the previous nonempty line, but
! ;; align the comment ender with the starter.
(when (or (not (looking-at c-current-comment-prefix))
(eq (match-beginning 0) (match-end 0)))
(goto-char here)
(back-to-indentation)
(if (looking-at (concat "\\(" c-current-comment-prefix "\\)\\*/"))
! (goto-char (cdr langelem))
(while (and (zerop (forward-line -1))
(looking-at "^[ \t]*$")))
(back-to-indentation)
! (if (< (point) (cdr langelem))
;; Align with the comment starter rather than
;; with the code before it.
! (goto-char (cdr langelem)))))
(vector (current-column)))))))
(defun c-lineup-comment (langelem)
--- 596,622 ----
;; Javadoc style comments.
(if (> starterlen prefixlen)
(progn
! (goto-char (c-langelem-pos langelem))
(vector (1+ (current-column))))
! (goto-char (+ (c-langelem-pos langelem) starterlen 1))
(vector (- (current-column) prefixlen))))
! ;; We didn't start on the first non-blank continuation line. If the
! ;; previous line has a nonempty comment prefix, align with it.
! ;; Otherwise, align with the previous nonempty line, but align the
! ;; comment ender with the starter.
(when (or (not (looking-at c-current-comment-prefix))
(eq (match-beginning 0) (match-end 0)))
(goto-char here)
(back-to-indentation)
(if (looking-at (concat "\\(" c-current-comment-prefix "\\)\\*/"))
! (goto-char (c-langelem-pos langelem))
(while (and (zerop (forward-line -1))
(looking-at "^[ \t]*$")))
(back-to-indentation)
! (if (< (point) (c-langelem-pos langelem))
;; Align with the comment starter rather than
;; with the code before it.
! (goto-char (c-langelem-pos langelem)))))
(vector (current-column)))))))
(defun c-lineup-comment (langelem)
***************
*** 665,702 ****
returned. This makes the function usable in list expressions.
Works with: The `statement' syntactic symbol."
! (if (eq (char-after (cdr langelem)) ?{)
(save-excursion
! (if (cdr langelem) (goto-char (cdr langelem)))
(forward-char 1)
(skip-chars-forward " \t")
(unless (eolp)
(vector (current-column))))))
! (defun c-lineup-math (langelem)
! "Line up the current line after the equal sign on the first line in
! the statement. If there isn't any, indent with `c-basic-offset'. If
! the current line contains an equal sign too, try to align it with the
! first one.
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
(let (startpos endpos equalp)
! (if (eq (car langelem) 'arglist-cont-nonempty)
;; If it's an arglist-cont-nonempty then we're only interested
;; in equal signs outside it. We don't search for a "=" on
;; the current line since that'd have a different nesting
;; compared to the one we should align with.
(save-excursion
(save-restriction
! (setq endpos (nth 2 c-syntactic-element))
! (narrow-to-region (cdr langelem) endpos)
(if (setq startpos (c-up-list-backward endpos))
(setq startpos (1+ startpos))
! (setq startpos (cdr langelem)))))
! (setq startpos (cdr langelem)
endpos (point))
;; Find a syntactically relevant and unnested "=" token on the
--- 681,719 ----
returned. This makes the function usable in list expressions.
Works with: The `statement' syntactic symbol."
! (if (eq (char-after (c-langelem-pos langelem)) ?{)
(save-excursion
! (if (c-langelem-pos langelem)
! (goto-char (c-langelem-pos langelem)))
(forward-char 1)
(skip-chars-forward " \t")
(unless (eolp)
(vector (current-column))))))
! (defun c-lineup-assignments (langelem)
! "Line up the current line after the assignment operator on the first
! line in the statement. If there isn't any, return nil to allow
! stacking with other line-up functions. If the current line contains
! an assignment operator too, try to align it with the first one.
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
(let (startpos endpos equalp)
! (if (eq (c-langelem-sym langelem) 'arglist-cont-nonempty)
;; If it's an arglist-cont-nonempty then we're only interested
;; in equal signs outside it. We don't search for a "=" on
;; the current line since that'd have a different nesting
;; compared to the one we should align with.
(save-excursion
(save-restriction
! (setq endpos (c-langelem-2nd-pos c-syntactic-element))
! (narrow-to-region (c-langelem-pos langelem) endpos)
(if (setq startpos (c-up-list-backward endpos))
(setq startpos (1+ startpos))
! (setq startpos (c-langelem-pos langelem)))))
! (setq startpos (c-langelem-pos langelem)
endpos (point))
;; Find a syntactically relevant and unnested "=" token on the
***************
*** 727,733 ****
(eolp)))
;; There's no equal sign on the line, or there is one but
;; nothing follows it.
! c-basic-offset
;; calculate indentation column after equals and ws, unless
;; our line contains an equals sign
--- 744,750 ----
(eolp)))
;; There's no equal sign on the line, or there is one but
;; nothing follows it.
! nil
;; calculate indentation column after equals and ws, unless
;; our line contains an equals sign
***************
*** 739,744 ****
--- 756,772 ----
(vector (- (current-column) equalp)))
)))
+ (defun c-lineup-math (langelem)
+ "Like `c-lineup-assignments' but indent with `c-basic-offset' if no
+ assignment operator was found on the first line. I.e. this function
+ is the same as specifying a list (c-lineup-assignments +). It's
+ provided for compatibility with old configurations.
+
+ Works with: topmost-intro-cont, statement-cont, arglist-cont,
+ arglist-cont-nonempty."
+ (or (c-lineup-assignments langelem)
+ c-basic-offset))
+
(defun c-lineup-cascaded-calls (langelem)
"Line up \"cascaded calls\" under each other.
If the line begins with \"->\" or \".\" and the preceding line ends
***************
*** 755,762 ****
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
! (if (and (eq (car langelem) 'arglist-cont-nonempty)
! (not (eq (nth 2 c-syntactic-element)
(c-most-enclosing-brace (c-parse-state)))))
;; The innermost open paren is not our one, so don't do
;; anything. This can occur for arglist-cont-nonempty with
--- 783,790 ----
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
! (if (and (eq (c-langelem-sym langelem) 'arglist-cont-nonempty)
! (not (eq (c-langelem-2nd-pos c-syntactic-element)
(c-most-enclosing-brace (c-parse-state)))))
;; The innermost open paren is not our one, so don't do
;; anything. This can occur for arglist-cont-nonempty with
***************
*** 767,773 ****
(back-to-indentation)
(let ((operator (and (looking-at "->\\|\\.")
(regexp-quote (match-string 0))))
! (stmt-start (cdr langelem)) col)
(when (and operator
(looking-at operator)
--- 795,801 ----
(back-to-indentation)
(let ((operator (and (looking-at "->\\|\\.")
(regexp-quote (match-string 0))))
! (stmt-start (c-langelem-pos langelem)) col)
(when (and operator
(looking-at operator)
***************
*** 794,800 ****
\"string.\"; <- c-lineup-string-cont
Nil is returned in other situations, to allow stacking with other
! lineup functions.
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
--- 822,828 ----
\"string.\"; <- c-lineup-string-cont
Nil is returned in other situations, to allow stacking with other
! line-up functions.
Works with: topmost-intro-cont, statement-cont, arglist-cont,
arglist-cont-nonempty."
***************
*** 829,846 ****
Go to the position right after the message receiver, and if you are at
the end of the line, indent the current line c-basic-offset columns
from the opening bracket; otherwise you are looking at the first
! character of the first method call argument, so lineup the current
line with it.
Works with: objc-method-call-cont."
(save-excursion
(let* ((extra (save-excursion
(back-to-indentation)
! (c-backward-syntactic-ws (cdr langelem))
(if (eq (char-before) ?:)
(- c-basic-offset)
0)))
! (open-bracket-pos (cdr langelem))
(open-bracket-col (progn
(goto-char open-bracket-pos)
(current-column)))
--- 857,874 ----
Go to the position right after the message receiver, and if you are at
the end of the line, indent the current line c-basic-offset columns
from the opening bracket; otherwise you are looking at the first
! character of the first method call argument, so line up the current
line with it.
Works with: objc-method-call-cont."
(save-excursion
(let* ((extra (save-excursion
(back-to-indentation)
! (c-backward-syntactic-ws (c-langelem-pos langelem))
(if (eq (char-before) ?:)
(- c-basic-offset)
0)))
! (open-bracket-pos (c-langelem-pos langelem))
(open-bracket-col (progn
(goto-char open-bracket-pos)
(current-column)))
***************
*** 864,870 ****
(let* ((here (c-point 'boi))
(curcol (progn (goto-char here) (current-column)))
(eol (c-point 'eol))
! (relpos (cdr langelem))
(first-col-column (progn
(goto-char relpos)
(skip-chars-forward "^:" eol)
--- 892,898 ----
(let* ((here (c-point 'boi))
(curcol (progn (goto-char here) (current-column)))
(eol (c-point 'eol))
! (relpos (c-langelem-pos langelem))
(first-col-column (progn
(goto-char relpos)
(skip-chars-forward "^:" eol)
***************
*** 888,894 ****
(let* ((here (c-point 'boi))
(curcol (progn (goto-char here) (current-column)))
(eol (c-point 'eol))
! (relpos (cdr langelem))
(prev-col-column (progn
(skip-chars-backward "^:" relpos)
(and (eq (char-before) ?:)
--- 916,922 ----
(let* ((here (c-point 'boi))
(curcol (progn (goto-char here) (current-column)))
(eol (c-point 'eol))
! (relpos (c-langelem-pos langelem))
(prev-col-column (progn
(skip-chars-backward "^:" relpos)
(and (eq (char-before) ?:)
***************
*** 927,939 ****
containing-sexp))))))
(when res
(goto-char (cdr res))
! (- (current-column)
! (progn
! (back-to-indentation)
! (current-column)))))))
(defun c-lineup-whitesmith-in-block (langelem)
! "Line up lines inside a block in whitesmith style.
It's done in a way that works both when the opening brace hangs and
when it doesn't. E.g:
--- 955,964 ----
containing-sexp))))))
(when res
(goto-char (cdr res))
! (vector (current-column))))))
(defun c-lineup-whitesmith-in-block (langelem)
! "Line up lines inside a block in Whitesmith style.
It's done in a way that works both when the opening brace hangs and
when it doesn't. E.g:
***************
*** 946,966 ****
In the first case the indentation is kept unchanged, in the
second `c-basic-offset' is added.
! Works with: defun-close, defun-block-intro, block-close,
! brace-list-close, brace-list-intro, statement-block-intro and all in*
symbols, e.g. inclass and inextern-lang."
(save-excursion
! (+ (progn
! (back-to-indentation)
! (if (eq (char-syntax (char-after)) ?\()
! c-basic-offset
! 0))
! (progn
! (goto-char (cdr langelem))
! (back-to-indentation)
! (if (eq (char-syntax (char-after)) ?\()
! 0
! c-basic-offset)))))
(defun c-lineup-cpp-define (langelem)
"Line up macro continuation lines according to the indentation of
--- 971,1024 ----
In the first case the indentation is kept unchanged, in the
second `c-basic-offset' is added.
! Works with: defun-close, defun-block-intro, inline-close, block-close,
! brace-list-close, brace-list-intro, statement-block-intro,
! arglist-intro, arglist-cont-nonempty, arglist-close, and all in*
symbols, e.g. inclass and inextern-lang."
(save-excursion
! (if (and (c-go-up-list-backward)
! (= (point) (c-point 'boi)))
! nil
! c-basic-offset)))
!
! (defun c-lineup-after-whitesmith-blocks (langelem)
! "Compensate for Whitesmith style indentation of blocks.
! Due to the way CC Mode calculates anchor positions for normal lines
! inside blocks, this function is necessary for those lines to get
! correct Whitesmith style indentation. Consider the following
! examples:
!
! int foo()
! {
! int foo() {
! { a;
! a; }
! x; <-> x; <- c-lineup-after-whitesmith-blocks
!
! The fact that the line with \"x\" is preceded by a Whitesmith style
! indented block in one case and not the other should not affect its
! indentation. But since CC Mode in cases like this uses the
! indentation of the preceding statement as anchor position, the \"x\"
! would in the rightmost case be indented too much if the offset for
! `statement' was set simply to zero.
!
! This lineup function corrects for this situation by detecting if the
! anchor position is at an open paren character. In that case, it
! instead indents relative to the surrounding block just like
! `c-lineup-whitesmith-in-block'.
!
! Works with: brace-list-entry, brace-entry-open, statement,
! arglist-cont."
! (save-excursion
! (goto-char (c-langelem-pos langelem))
! (when (looking-at "\\s\(")
! (if (c-go-up-list-backward)
! (let ((pos (point)))
! (back-to-indentation)
! (if (= pos (point))
! (vector (current-column))
! (vector (+ (current-column) c-basic-offset))))
! (vector 0)))))
(defun c-lineup-cpp-define (langelem)
"Line up macro continuation lines according to the indentation of
***************
*** 1058,1066 ****
The \"x\" line is aligned to the text after the \":\" on the \"w\" line, and
similarly \"z\" under \"y\".
! This is done only in an \"asm\" or \"__asm__\" block, and only to those
! lines mentioned. Anywhere else nil is returned. The usual arrangement is
! to have this routine as an extra feature at the start of arglist lineups, e.g.
(c-lineup-gcc-asm-reg c-lineup-arglist)
--- 1116,1125 ----
The \"x\" line is aligned to the text after the \":\" on the \"w\" line, and
similarly \"z\" under \"y\".
! This is done only in an \"asm\" or \"__asm__\" block, and only to
! those lines mentioned. Anywhere else nil is returned. The usual
! arrangement is to have this routine as an extra feature at the start
! of arglist line-ups, e.g.
(c-lineup-gcc-asm-reg c-lineup-arglist)
***************
*** 1076,1082 ****
;; This can occur for arglist-cont-nonempty with nested arglist
;; starts on the same line.
(or (not (eq (car elem) 'arglist-cont-nonempty))
! (eq (elt c-syntactic-element 2)
(c-most-enclosing-brace (c-parse-state))))
;; Find the ":" to align to. Look for this first so as to quickly
--- 1135,1141 ----
;; This can occur for arglist-cont-nonempty with nested arglist
;; starts on the same line.
(or (not (eq (car elem) 'arglist-cont-nonempty))
! (eq (c-langelem-2nd-pos c-syntactic-element)
(c-most-enclosing-brace (c-parse-state))))
;; Find the ":" to align to. Look for this first so as to quickly
***************
*** 1117,1128 ****
(let (langelem)
(if (and (eq syntax 'block-close)
(setq langelem (assq 'block-close c-syntactic-context))
! (progn (goto-char (elt langelem 1))
(if (eq (char-after) ?{)
(c-safe (c-forward-sexp -1)))
(looking-at "\\<do\\>[^_]")))
'(before)
'(before after)))))
(defun c-gnu-impose-minimum ()
"Imposes a minimum indentation for lines inside code blocks.
--- 1176,1198 ----
(let (langelem)
(if (and (eq syntax 'block-close)
(setq langelem (assq 'block-close c-syntactic-context))
! (progn (goto-char (c-langelem-pos langelem))
(if (eq (char-after) ?{)
(c-safe (c-forward-sexp -1)))
(looking-at "\\<do\\>[^_]")))
'(before)
'(before after)))))
+
+ (defun c-snug-1line-defun-close (syntax pos)
+ "Determine the brace hanginess for an AWK defun-close.
+ If the action/function being closed is a one-liner, keep it so. Otherwise put
+ the closing brace on its own line."
+ (save-excursion
+ (goto-char pos)
+ (if (> (c-point 'bol)
+ (progn (up-list -1) (point)))
+ '(before after)
+ '(after))))
(defun c-gnu-impose-minimum ()
"Imposes a minimum indentation for lines inside code blocks.
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Emacs-diffs] Changes to emacs/lisp/progmodes/cc-align.el,
Alan Mackenzie <=