[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Emacs-diffs] Changes to emacs/lisp/simple.el
From: |
Stefan Monnier |
Subject: |
[Emacs-diffs] Changes to emacs/lisp/simple.el |
Date: |
Tue, 13 May 2003 15:45:01 -0400 |
Index: emacs/lisp/simple.el
diff -c emacs/lisp/simple.el:1.599 emacs/lisp/simple.el:1.600
*** emacs/lisp/simple.el:1.599 Tue May 6 13:52:20 2003
--- emacs/lisp/simple.el Tue May 13 15:45:01 2003
***************
*** 368,375 ****
"Move point to the first non-whitespace character on this line."
(interactive)
(beginning-of-line 1)
! (let ((limit (line-end-position)))
! (skip-syntax-forward " " limit))
;; Move back over chars that have whitespace syntax but have the p flag.
(backward-prefix-chars))
--- 368,374 ----
"Move point to the first non-whitespace character on this line."
(interactive)
(beginning-of-line 1)
! (skip-syntax-forward " " (line-end-position))
;; Move back over chars that have whitespace syntax but have the p flag.
(backward-prefix-chars))
***************
*** 938,950 ****
;Put this on C-x u, so we can force that rather than C-_ into startup msg
(defalias 'advertised-undo 'undo)
(defun undo (&optional arg)
"Undo some previous changes.
Repeat this command to undo more changes.
A numeric argument serves as a repeat count.
In Transient Mark mode when the mark is active, only undo changes within
! the current region. Similarly, when not in Transient Mark mode, just C-u
as an argument limits undo to changes within the current region."
(interactive "*P")
;; Make last-command indicate for the next command that this was an undo.
--- 937,958 ----
;Put this on C-x u, so we can force that rather than C-_ into startup msg
(defalias 'advertised-undo 'undo)
+ (defconst undo-equiv-table (make-hash-table :test 'eq :weakness t)
+ "Table mapping redo records to the corresponding undo one.")
+
+ (defvar undo-in-region nil
+ "Non-nil if `pending-undo-list' is not just a tail of `buffer-undo-list'.")
+
+ (defvar undo-no-redo nil
+ "If t, `undo' doesn't go through redo entries.")
+
(defun undo (&optional arg)
"Undo some previous changes.
Repeat this command to undo more changes.
A numeric argument serves as a repeat count.
In Transient Mark mode when the mark is active, only undo changes within
! the current region. Similarly, when not in Transient Mark mode, just
\\[universal-argument]
as an argument limits undo to changes within the current region."
(interactive "*P")
;; Make last-command indicate for the next command that this was an undo.
***************
*** 956,975 ****
(setq this-command 'undo)
(let ((modified (buffer-modified-p))
(recent-save (recent-auto-save-p)))
- (or (eq (selected-window) (minibuffer-window))
- (message (if (and transient-mark-mode mark-active)
- "Undo in region!"
- "Undo!")))
(unless (eq last-command 'undo)
! (if (if transient-mark-mode mark-active (and arg (not (numberp arg))))
(undo-start (region-beginning) (region-end))
(undo-start))
;; get rid of initial undo boundary
(undo-more 1))
(undo-more
(if (or transient-mark-mode (numberp arg))
(prefix-numeric-value arg)
1))
;; Don't specify a position in the undo record for the undo command.
;; Instead, undoing this should move point to where the change is.
(let ((tail buffer-undo-list)
--- 964,1002 ----
(setq this-command 'undo)
(let ((modified (buffer-modified-p))
(recent-save (recent-auto-save-p)))
(unless (eq last-command 'undo)
! (setq undo-in-region
! (if transient-mark-mode mark-active (and arg (not (numberp arg)))))
! (if undo-in-region
(undo-start (region-beginning) (region-end))
(undo-start))
;; get rid of initial undo boundary
(undo-more 1))
+ ;; Check to see whether we're hitting a redo record, and if
+ ;; so, ask the user whether she wants to skip the redo/undo pair.
+ (let ((equiv (gethash pending-undo-list undo-equiv-table)))
+ (or (eq (selected-window) (minibuffer-window))
+ (message (if undo-in-region
+ (if equiv "Redo in region!" "Undo in region!")
+ (if equiv "Redo!" "Undo!"))))
+ (when (and equiv undo-no-redo)
+ ;; The equiv entry might point to another redo record if we have done
+ ;; undo-redo-undo-redo-... so skip to the very last equiv.
+ (while (let ((next (gethash equiv undo-equiv-table)))
+ (if next (setq equiv next))))
+ (setq pending-undo-list equiv)))
(undo-more
(if (or transient-mark-mode (numberp arg))
(prefix-numeric-value arg)
1))
+ ;; Record the fact that the just-generated undo records come from an
+ ;; undo operation, so we can skip them later on.
+ ;; I don't know how to do that in the undo-in-region case.
+ (unless undo-in-region
+ (when (eval-when-compile (fboundp 'assert))
+ (assert (or (null pending-undo-list) (car pending-undo-list)))
+ (assert (car buffer-undo-list)))
+ (puthash buffer-undo-list pending-undo-list undo-equiv-table))
;; Don't specify a position in the undo record for the undo command.
;; Instead, undoing this should move point to where the change is.
(let ((tail buffer-undo-list)
***************
*** 977,985 ****
(while (car tail)
(when (integerp (car tail))
(let ((pos (car tail)))
! (if (null prev)
! (setq buffer-undo-list (cdr tail))
! (setcdr prev (cdr tail)))
(setq tail (cdr tail))
(while (car tail)
(if (eq pos (car tail))
--- 1004,1012 ----
(while (car tail)
(when (integerp (car tail))
(let ((pos (car tail)))
! (if prev
! (setcdr prev (cdr tail))
! (setq buffer-undo-list (cdr tail)))
(setq tail (cdr tail))
(while (car tail)
(if (eq pos (car tail))
***************
*** 994,999 ****
--- 1021,1035 ----
(and modified (not (buffer-modified-p))
(delete-auto-save-file-if-necessary recent-save))))
+ (defun undo-only (&optional arg)
+ "Undo some previous changes.
+ Repeat this command to undo more changes.
+ A numeric argument serves as a repeat count.
+ Contrary to `undo', this will not redo a previous undo."
+ (interactive "*p")
+ (let ((undo-no-redo t)) (undo arg)))
+ (define-key ctl-x-map "U" 'undo-only)
+
(defvar pending-undo-list nil
"Within a run of consecutive undo commands, list remaining to be undone.")
***************
*** 1307,1314 ****
(if (yes-or-no-p "A command is running. Kill it? ")
(kill-process proc)
(error "Shell command in progress")))
! (save-excursion
! (set-buffer buffer)
(setq buffer-read-only nil)
(erase-buffer)
(display-buffer buffer)
--- 1343,1349 ----
(if (yes-or-no-p "A command is running. Kill it? ")
(kill-process proc)
(error "Shell command in progress")))
! (with-current-buffer buffer
(setq buffer-read-only nil)
(erase-buffer)
(display-buffer buffer)
***************
*** 1316,1322 ****
(setq proc (start-process "Shell" buffer shell-file-name
shell-command-switch command))
(setq mode-line-process '(":%s"))
! (require 'shell) (shell-mode)
(set-process-sentinel proc 'shell-command-sentinel)
))
(shell-command-on-region (point) (point) command
--- 1351,1357 ----
(setq proc (start-process "Shell" buffer shell-file-name
shell-command-switch command))
(setq mode-line-process '(":%s"))
! (shell-mode)
(set-process-sentinel proc 'shell-command-sentinel)
))
(shell-command-on-region (point) (point) command
***************
*** 2276,2282 ****
BUFFER may be a buffer or a buffer name.
This function is meant for the user to run interactively.
! Don't call it from programs!"
(interactive
(list
(progn
--- 2311,2317 ----
BUFFER may be a buffer or a buffer name.
This function is meant for the user to run interactively.
! Don't call it from programs: use `insert-buffer-substring' instead!"
(interactive
(list
(progn
***************
*** 2286,2301 ****
(other-buffer (current-buffer))
(window-buffer (next-window (selected-window))))
t))))
! (or (bufferp buffer)
! (setq buffer (get-buffer buffer)))
! (let (start end newmark)
! (save-excursion
! (save-excursion
! (set-buffer buffer)
! (setq start (point-min) end (point-max)))
! (insert-buffer-substring buffer start end)
! (setq newmark (point)))
! (push-mark newmark))
nil)
(defun append-to-buffer (buffer start end)
--- 2321,2330 ----
(other-buffer (current-buffer))
(window-buffer (next-window (selected-window))))
t))))
! (push-mark
! (save-excursion
! (insert-buffer-substring (get-buffer buffer))
! (point)))
nil)
(defun append-to-buffer (buffer start end)
***************
*** 3040,3045 ****
--- 3069,3076 ----
(if (> (cdr pos1) (car pos2)) (error "Don't have two things to transpose"))
(atomic-change-group
(let (word2)
+ ;; FIXME: We first delete the two pieces of text, so markers that
+ ;; used to point to after the text end up pointing to before it :-(
(setq word2 (delete-and-extract-region (car pos2) (cdr pos2)))
(goto-char (car pos2))
(insert (delete-and-extract-region (car pos1) (cdr pos1)))
***************
*** 4014,4021 ****
(- (point) (minibuffer-prompt-end))))
;; Otherwise, in minibuffer, the whole input is being completed.
(save-match-data
! (if (string-match "\\` \\*Minibuf-[0-9]+\\*\\'"
! (buffer-name mainbuf))
(setq completion-base-size 0))))
(goto-char (point-min))
(if (display-mouse-p)
--- 4045,4051 ----
(- (point) (minibuffer-prompt-end))))
;; Otherwise, in minibuffer, the whole input is being completed.
(save-match-data
! (if (minibufferp mainbuf)
(setq completion-base-size 0))))
(goto-char (point-min))
(if (display-mouse-p)
***************
*** 4055,4081 ****
;; to the following event.
(defun event-apply-alt-modifier (ignore-prompt)
! "Add the Alt modifier to the following event.
For example, type \\[event-apply-alt-modifier] & to enter Alt-&."
(vector (event-apply-modifier (read-event) 'alt 22 "A-")))
(defun event-apply-super-modifier (ignore-prompt)
! "Add the Super modifier to the following event.
For example, type \\[event-apply-super-modifier] & to enter Super-&."
(vector (event-apply-modifier (read-event) 'super 23 "s-")))
(defun event-apply-hyper-modifier (ignore-prompt)
! "Add the Hyper modifier to the following event.
For example, type \\[event-apply-hyper-modifier] & to enter Hyper-&."
(vector (event-apply-modifier (read-event) 'hyper 24 "H-")))
(defun event-apply-shift-modifier (ignore-prompt)
! "Add the Shift modifier to the following event.
For example, type \\[event-apply-shift-modifier] & to enter Shift-&."
(vector (event-apply-modifier (read-event) 'shift 25 "S-")))
(defun event-apply-control-modifier (ignore-prompt)
! "Add the Ctrl modifier to the following event.
For example, type \\[event-apply-control-modifier] & to enter Ctrl-&."
(vector (event-apply-modifier (read-event) 'control 26 "C-")))
(defun event-apply-meta-modifier (ignore-prompt)
! "Add the Meta modifier to the following event.
For example, type \\[event-apply-meta-modifier] & to enter Meta-&."
(vector (event-apply-modifier (read-event) 'meta 27 "M-")))
--- 4085,4111 ----
;; to the following event.
(defun event-apply-alt-modifier (ignore-prompt)
! "\\<function-key-map>Add the Alt modifier to the following event.
For example, type \\[event-apply-alt-modifier] & to enter Alt-&."
(vector (event-apply-modifier (read-event) 'alt 22 "A-")))
(defun event-apply-super-modifier (ignore-prompt)
! "\\<function-key-map>Add the Super modifier to the following event.
For example, type \\[event-apply-super-modifier] & to enter Super-&."
(vector (event-apply-modifier (read-event) 'super 23 "s-")))
(defun event-apply-hyper-modifier (ignore-prompt)
! "\\<function-key-map>Add the Hyper modifier to the following event.
For example, type \\[event-apply-hyper-modifier] & to enter Hyper-&."
(vector (event-apply-modifier (read-event) 'hyper 24 "H-")))
(defun event-apply-shift-modifier (ignore-prompt)
! "\\<function-key-map>Add the Shift modifier to the following event.
For example, type \\[event-apply-shift-modifier] & to enter Shift-&."
(vector (event-apply-modifier (read-event) 'shift 25 "S-")))
(defun event-apply-control-modifier (ignore-prompt)
! "\\<function-key-map>Add the Ctrl modifier to the following event.
For example, type \\[event-apply-control-modifier] & to enter Ctrl-&."
(vector (event-apply-modifier (read-event) 'control 26 "C-")))
(defun event-apply-meta-modifier (ignore-prompt)
! "\\<function-key-map>Add the Meta modifier to the following event.
For example, type \\[event-apply-meta-modifier] & to enter Meta-&."
(vector (event-apply-modifier (read-event) 'meta 27 "M-")))
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Juanma Barranquero, 2003/05/06
- [Emacs-diffs] Changes to emacs/lisp/simple.el,
Stefan Monnier <=
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Stefan Monnier, 2003/05/13
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Stefan Monnier, 2003/05/16
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Kai Großjohann, 2003/05/19
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Stefan Monnier, 2003/05/21
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Juanma Barranquero, 2003/05/24
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Juanma Barranquero, 2003/05/24
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Kai Großjohann, 2003/05/28
- [Emacs-diffs] Changes to emacs/lisp/simple.el, Luc Teirlinck, 2003/05/29