[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: texinfo-master-menu and emacs.texi
|
From: |
Roland Winkler |
|
Subject: |
Re: texinfo-master-menu and emacs.texi |
|
Date: |
Wed, 7 Dec 2011 08:08:00 -0600 |
On Wed Dec 7 2011 Eli Zaretskii wrote:
> It would help if you'd show the error messages from the "unhappy"
> makeinfo.
Thanks for your help. I attached the diffs between the original
emacs.texi and what texinfo-master-menu made out of it
(diff-emacs.texi.txt). Also, I attached a file makinfo-output.txt
with the makeinfo output for the modified file emacs.texi
> As things are, I need to guess, and my guess is that
> texinfo-master-menu does not support multi-file manuals. It only
> works on a single buffer. At least I don't see in its code any
> hints that it does have the ability to gather all the multiple
> files which constitute the ELisp manual, using the @include
> directives or some such.
If this was the case it would help if it was documented somewhere.
> My advice is to use texinfo-update-node and texinfo-make-menu on
> individual nodes or groups of nodes as you go; that's what I do.
> Unless your manual is on a single large file, in which case I expect
> texinfo-master-menu to just work.
While my info manual is still very short, it contains already three
files as I am including the files gpl.texi and doclicense.texi. It
would be unfortunate if the inclusion of these files made it already
impossible to use texinfo-master-menu.
> What I advise above is AFAIK the "more sophisticated way".
Thanks again,
Roland
--- emacs.texi~ 2011-12-07 08:00:34.000000000 -0600
+++ emacs.texi 2011-12-07 08:00:49.000000000 -0600
@@ -133,1084 +133,27 @@
@end ignore
@menu
-* Distrib:: How to get the latest Emacs distribution.
-* Intro:: An introduction to Emacs concepts.
+* Distrib:: How to get the latest Emacs distribution.
+* Intro:: An introduction to Emacs concepts.
@c Note that in the printed manual, the glossary and indices come last.
-* Glossary:: Terms used in this manual.
-
-Indexes (each index contains a large menu)
-* Key Index:: An item for each standard Emacs key sequence.
-* Option Index:: An item for every command-line option.
-* Command Index:: An item for each command name.
-* Variable Index:: An item for each documented variable.
-* Concept Index:: An item for each concept.
-
-* Acknowledgments:: Major contributors to GNU Emacs.
-
-Important General Concepts
-* Screen:: How to interpret what you see on the screen.
-* User Input:: Kinds of input events (characters, buttons,
- function keys).
-* Keys:: Key sequences: what you type to request one
- editing action.
-* Commands:: Named functions run by key sequences to do editing.
-* Entering Emacs:: Starting Emacs from the shell.
-* Exiting:: Stopping or killing Emacs.
-
-Fundamental Editing Commands
-* Basic:: The most basic editing commands.
-* Minibuffer:: Entering arguments that are prompted for.
-* M-x:: Invoking commands by their names.
-* Help:: Commands for asking Emacs about its commands.
-
-Important Text-Changing Commands
-* Mark:: The mark: how to delimit a "region" of text.
-* Killing:: Killing (cutting) text.
-* Yanking:: Recovering killed text. Moving text. (Pasting.)
-* Cut and Paste:: Clipboard and selections on graphical displays.
-* Accumulating Text:: Other ways of copying text.
-* Rectangles:: Operating on text in rectangular areas.
-* CUA Bindings:: Using @kbd{C-x}, @kbd{C-c}, @kbd{C-v} to kill and yank.
-* Registers:: Saving a text string or a location in the buffer.
-* Display:: Controlling what text is displayed.
-* Search:: Finding or replacing occurrences of a string.
-* Fixit:: Commands especially useful for fixing typos.
-* Keyboard Macros:: Recording a sequence of keystrokes to be replayed.
-
-Major Structures of Emacs
-* Files:: All about handling files.
-* Buffers:: Multiple buffers; editing several files at once.
-* Windows:: Viewing two pieces of text at once.
-* Frames:: Running the same Emacs session in multiple X windows.
-* International:: Using address@hidden character sets.
-
-Advanced Features
-* Modes:: Major and minor modes alter Emacs' basic behavior.
-* Indentation:: Editing the white space at the beginnings of lines.
-* Text:: Commands and modes for editing human languages.
-* Programs:: Commands and modes for editing programs.
-* Building:: Compiling, running and debugging programs.
-* Maintaining:: Features for maintaining large programs.
-* Abbrevs:: Defining text abbreviations to reduce
- the number of characters you must type.
-* Dired:: Directory and file manager.
-* Calendar/Diary:: Calendar and diary facilities.
-* Sending Mail:: Sending mail in Emacs.
-* Rmail:: Reading mail in Emacs.
-* Gnus:: A flexible mail and news reader.
-* Document View:: Viewing PDF, PS and DVI files.
-* Shell:: Executing shell commands from Emacs.
-* Emacs Server:: Using Emacs as an editing server.
-* Printing:: Printing hardcopies of buffers or regions.
-* Sorting:: Sorting lines, paragraphs or pages within Emacs.
address@hidden
-* Picture Mode:: Editing pictures made up of text characters.
address@hidden ifnottex
-* Editing Binary Files:: Editing binary files with Hexl mode.
-* Saving Emacs Sessions:: Saving Emacs state from one session to the next.
-* Recursive Edit:: Performing edits while "within another command".
-* Emulation:: Emulating some other editors with Emacs.
-* Hyperlinking:: Following links in buffers.
-* Amusements:: Various games and hacks.
-* Packages:: Installing additional features.
-* Customization:: Modifying the behavior of Emacs.
-
-Recovery from Problems
-* Quitting:: Quitting and aborting.
-* Lossage:: What to do if Emacs is hung or malfunctioning.
-* Bugs:: How and when to report a bug.
-* Contributing:: How to contribute improvements to Emacs.
-* Service:: How to get help for your own Emacs needs.
-
-Appendices
-* Copying:: The GNU General Public License gives you permission
+* Copying:: The GNU General Public License gives you
permission
to redistribute GNU Emacs on certain terms;
it also explains that there is no warranty.
-* GNU Free Documentation License:: The license for this documentation.
-* Emacs Invocation:: Hairy startup options.
-* X Resources:: X resources for customizing Emacs.
-* Antinews:: Information about Emacs version 22.
-* Mac OS / GNUstep:: Using Emacs under Mac OS and GNUstep.
-* Microsoft Windows:: Using Emacs on Microsoft Windows and MS-DOS.
-* Manifesto:: What's GNU? Gnu's Not Unix!
-
address@hidden Do NOT modify the following 3 lines! They must have this form to
address@hidden be correctly identified by `texinfo-multiple-files-update'. In
address@hidden particular, the detailed menu header line MUST be identical to
the
address@hidden value of `texinfo-master-menu-header'. See texnfo-upd.el.
+* GNU Free Documentation License:: The license for this documentation.
+* Key Index:: An item for each standard Emacs key sequence.
+* Key Index:: An item for each standard Emacs key sequence.
+* Option Index:: An item for every command-line option.
+* Command Index:: An item for each command name.
+* Command Index:: An item for each command name.
+* Variable Index:: An item for each documented variable.
+* Concept Index:: An item for each concept.
@detailmenu
--- The Detailed Node Listing ---
- ---------------------------------
-
-Here are some other nodes which are really subnodes of the ones
-already listed, mentioned here so you can get to them in one step:
-
-The Organization of the Screen
-
-* Point:: The place in the text where editing commands operate.
-* Echo Area:: Short messages appear at the bottom of the screen.
-* Mode Line:: Interpreting the mode line.
-* Menu Bar:: How to use the menu bar.
-
-Basic Editing Commands
-
-* Inserting Text:: Inserting text by simply typing it.
-* Moving Point:: Moving the cursor to the place where you want to
- change something.
-* Erasing:: Deleting and killing text.
-* Basic Undo:: Undoing recent changes in the text.
-* Basic Files:: Visiting, creating, and saving files.
-* Basic Help:: Asking what a character does.
-* Blank Lines:: Making and deleting blank lines.
-* Continuation Lines:: How Emacs displays lines too wide for the screen.
-* Position Info:: What page, line, row, or column is point on?
-* Arguments:: Numeric arguments for repeating a command N times.
-* Repeating:: Repeating the previous command quickly.
-
-The Minibuffer
-
-* Minibuffer File:: Entering file names with the minibuffer.
-* Minibuffer Edit:: How to edit in the minibuffer.
-* Completion:: An abbreviation facility for minibuffer input.
-* Minibuffer History:: Reusing recent minibuffer arguments.
-* Repetition:: Re-executing commands that used the minibuffer.
-* Passwords:: Entering passwords in the echo area.
-
-Completion
-
-* Completion Example:: Examples of using completion.
-* Completion Commands:: A list of completion commands.
-* Strict Completion:: Different types of completion.
-* Completion Options:: Options for completion.
-
-Help
-
-* Help Summary:: Brief list of all Help commands.
-* Key Help:: Asking what a key does in Emacs.
-* Name Help:: Asking about a command, variable or function name.
-* Apropos:: Asking what pertains to a given topic.
-* Help Mode:: Special features of Help mode and Help buffers.
-* Library Keywords:: Finding Lisp libraries by keywords (topics).
-* Language Help:: Help relating to international language support.
-* Misc Help:: Other help commands.
-* Help Files:: Commands to display pre-written help files.
-* Help Echo:: Help on active text and tooltips (`balloon help').
-
-The Mark and the Region
-
-* Setting Mark:: Commands to set the mark.
-* Marking Objects:: Commands to put region around textual units.
-* Using Region:: Summary of ways to operate on contents of the region.
-* Mark Ring:: Previous mark positions saved so you can go back there.
-* Global Mark Ring:: Previous mark positions in various buffers.
-* Shift Selection:: Using shifted cursor motion keys.
-* Persistent Mark:: Keeping the mark active all the time.
-
-Killing and Moving Text
-
-* Deletion:: Commands for deleting small amounts of text and
- blank areas.
-* Killing by Lines:: How to kill entire lines of text at one time.
-* Other Kill Commands:: Commands to kill large regions of text and
- syntactic units such as words and sentences.
-* Kill Options:: Options that affect killing.
-
-Yanking
-
-* Kill Ring:: Where killed text is stored. Basic yanking.
-* Appending Kills:: Several kills in a row all yank together.
-* Earlier Kills:: Yanking something killed some time ago.
-
-Killing and Yanking on Graphical Displays
-
-* Clipboard:: How Emacs interacts with the system clipboard.
-* Primary Selection:: The temporarily selected text selection.
-* Secondary Selection:: Cutting without altering point and mark.
-
-Registers
-
-* Position Registers:: Saving positions in registers.
-* Text Registers:: Saving text in registers.
-* Rectangle Registers:: Saving rectangles in registers.
-* Configuration Registers:: Saving window configurations in registers.
-* Number Registers:: Numbers in registers.
-* File Registers:: File names in registers.
-* Bookmarks:: Bookmarks are like registers, but persistent.
-
-Controlling the Display
-
-* Scrolling:: Commands to move text up and down in a window.
-* Auto Scrolling:: Redisplay scrolls text automatically when needed.
-* Horizontal Scrolling:: Moving text left and right in a window.
-* Narrowing:: Restricting display and editing to a portion
- of the buffer.
-* View Mode:: Viewing read-only buffers.
-* Follow Mode:: Follow mode lets two windows scroll as one.
-* Faces:: How to change the display style using faces.
-* Standard Faces:: Emacs' predefined faces.
-* Temporary Face Changes:: Commands to temporarily modify the default text face
-* Font Lock:: Minor mode for syntactic highlighting using faces.
-* Highlight Interactively:: Tell Emacs what text to highlight.
-* Fringes:: Enabling or disabling window fringes.
-* Displaying Boundaries:: Displaying top and bottom of the buffer.
-* Useless Whitespace:: Showing possibly-spurious trailing whitespace.
-* Selective Display:: Hiding lines with lots of indentation.
-* Optional Mode Line:: Optional mode line display features.
-* Text Display:: How text characters are normally displayed.
-* Cursor Display:: Features for displaying the cursor.
-* Line Truncation:: Truncating lines to fit the screen width instead
- of continuing them to multiple screen lines.
-* Visual Line Mode:: Word wrap and screen line-based editing.
-* Display Custom:: Information on variables for customizing display.
-
-Searching and Replacement
-
-* Incremental Search:: Search happens as you type the string.
-* Nonincremental Search:: Specify entire string and then search.
-* Word Search:: Search for sequence of words.
-* Regexp Search:: Search for match for a regexp.
-* Regexps:: Syntax of regular expressions.
-* Regexp Backslash:: Regular expression constructs starting with `\'.
-* Regexp Example:: A complex regular expression explained.
-* Search Case:: To ignore case while searching, or not.
-* Replace:: Search, and replace some or all matches.
-* Other Repeating Search:: Operating on all matches for some regexp.
-
-Incremental Search
-
-* Basic Isearch:: Basic incremental search commands.
-* Repeat Isearch:: Searching for the same string again.
-* Error in Isearch:: When your string is not found.
-* Special Isearch:: Special input in incremental search.
-* Isearch Yank:: Commands that grab text into the search string
- or else edit the search string.
-* Isearch Scroll:: Scrolling during an incremental search.
-* Isearch Minibuffer:: Incremental search of the minibuffer history.
-* Slow Isearch:: Incremental search features for slow terminals.
-
-Replacement Commands
-
-* Unconditional Replace:: Replacing all matches for a string.
-* Regexp Replace:: Replacing all matches for a regexp.
-* Replacement and Case:: How replacements preserve case of letters.
-* Query Replace:: How to use querying.
-
-Commands for Fixing Typos
-
-* Undo:: The Undo commands.
-* Transpose:: Exchanging two characters, words, lines, lists...
-* Fixing Case:: Correcting case of last word entered.
-* Spelling:: Apply spelling checker to a word, or a whole file.
-
-Keyboard Macros
-
-* Basic Keyboard Macro:: Defining and running keyboard macros.
-* Keyboard Macro Ring:: Where previous keyboard macros are saved.
-* Keyboard Macro Counter:: Inserting incrementing numbers in macros.
-* Keyboard Macro Query:: Making keyboard macros do different things each
time.
-* Save Keyboard Macro:: Giving keyboard macros names; saving them in
files.
-* Edit Keyboard Macro:: Editing keyboard macros.
-* Keyboard Macro Step-Edit:: Interactively executing and editing a keyboard
- macro.
-
-File Handling
-
-* File Names:: How to type and edit file-name arguments.
-* Visiting:: Visiting a file prepares Emacs to edit the file.
-* Saving:: Saving makes your changes permanent.
-* Reverting:: Reverting cancels all the changes not saved.
-* Autorevert:: Auto Reverting non-file buffers.
-* Auto Save:: Auto Save periodically protects against loss of data.
-* File Aliases:: Handling multiple names for one file.
-* Directories:: Creating, deleting, and listing file directories.
-* Comparing Files:: Finding where two files differ.
-* Diff Mode:: Mode for editing file differences.
-* Misc File Ops:: Other things you can do on files.
-* Compressed Files:: Accessing compressed files.
-* File Archives:: Operating on tar, zip, jar etc. archive files.
-* Remote Files:: Accessing files on other sites.
-* Quoted File Names:: Quoting special characters in file names.
-* File Name Cache:: Completion against a list of files you often use.
-* File Conveniences:: Convenience Features for Finding Files.
-* Filesets:: Handling sets of files.
-
-Saving Files
-
-* Save Commands:: Commands for saving files.
-* Backup:: How Emacs saves the old version of your file.
-* Customize Save:: Customizing the saving of files.
-* Interlocking:: How Emacs protects against simultaneous editing
- of one file by two users.
-* File Shadowing:: Copying files to "shadows" automatically.
-* Time Stamps:: Emacs can update time stamps on saved files.
-
-Backup Files
-
-* Backup Names:: How backup files are named.
-* Backup Deletion:: Emacs deletes excess numbered backups.
-* Backup Copying:: Backups can be made by copying or renaming.
-
-Auto Reverting Non-File Buffers
-
-* Auto Reverting the Buffer Menu:: Auto Revert of the Buffer Menu.
-* Auto Reverting Dired:: Auto Revert of Dired buffers.
-* Supporting additional buffers:: How to add more Auto Revert support.
-
-Auto-Saving: Protection Against Disasters
-
-* Auto Save Files:: The file where auto-saved changes are
- actually made until you save the file.
-* Auto Save Control:: Controlling when and how often to auto-save.
-* Recover:: Recovering text from auto-save files.
-
-Using Multiple Buffers
-
-* Select Buffer:: Creating a new buffer or reselecting an old one.
-* List Buffers:: Getting a list of buffers that exist.
-* Misc Buffer:: Renaming; changing read-onlyness; copying text.
-* Kill Buffer:: Killing buffers you no longer need.
-* Several Buffers:: How to go through the list of all buffers
- and operate variously on several of them.
-* Indirect Buffers:: An indirect buffer shares the text of another buffer.
-* Buffer Convenience:: Convenience and customization features for
- buffer handling.
-
-Convenience Features and Customization of Buffer Handling
-
-* Uniquify:: Making buffer names unique with directory parts.
-* Iswitchb:: Switching between buffers with substrings.
-* Buffer Menus:: Configurable buffer menu.
-
-Multiple Windows
-
-* Basic Window:: Introduction to Emacs windows.
-* Split Window:: New windows are made by splitting existing windows.
-* Other Window:: Moving to another window or doing something to it.
-* Pop Up Window:: Finding a file or buffer in another window.
-* Force Same Window:: Forcing certain buffers to appear in the selected
- window rather than in another window.
-* Change Window:: Deleting windows and changing their sizes.
-* Window Convenience:: Convenience functions for window handling.
-
-Frames and Graphical Displays
-
-* Mouse Commands:: Moving, cutting, and pasting, with the mouse.
-* Word and Line Mouse:: Mouse commands for selecting whole words or lines.
-* Mouse References:: Using the mouse to select an item from a list.
-* Menu Mouse Clicks:: Mouse clicks that bring up menus.
-* Mode Line Mouse:: Mouse clicks on the mode line.
-* Creating Frames:: Creating additional Emacs frames with various contents.
-* Frame Commands:: Iconifying, deleting, and switching frames.
-* Fonts:: Changing the frame font.
-* Speedbar:: How to make and use a speedbar frame.
-* Multiple Displays:: How one Emacs job can talk to several displays.
-* Special Buffer Frames:: You can make certain buffers have their own frames.
-* Frame Parameters:: Changing the colors and other modes of frames.
-* Scroll Bars:: How to enable and disable scroll bars; how to use them.
-* Wheeled Mice:: Using mouse wheels for scrolling.
-* Drag and Drop:: Using drag and drop to open files and insert text.
-* Menu Bars:: Enabling and disabling the menu bar.
-* Tool Bars:: Enabling and disabling the tool bar.
-* Dialog Boxes:: Controlling use of dialog boxes.
-* Tooltips:: Displaying information at the current mouse position.
-* Mouse Avoidance:: Moving the mouse pointer out of the way.
-* Non-Window Terminals:: Multiple frames on terminals that show only one.
-* Text-Only Mouse:: Using the mouse in text-only terminals.
-
-International Character Set Support
-
-* International Chars:: Basic concepts of multibyte characters.
-* Enabling Multibyte:: Controlling whether to use multibyte characters.
-* Language Environments:: Setting things up for the language you use.
-* Input Methods:: Entering text characters not on your keyboard.
-* Select Input Method:: Specifying your choice of input methods.
-* Coding Systems:: Character set conversion when you read and
- write files, and so on.
-* Recognize Coding:: How Emacs figures out which conversion to use.
-* Specify Coding:: Specifying a file's coding system explicitly.
-* Output Coding:: Choosing coding systems for output.
-* Text Coding:: Choosing conversion to use for file text.
-* Communication Coding:: Coding systems for interprocess communication.
-* File Name Coding:: Coding systems for file @emph{names}.
-* Terminal Coding:: Specifying coding systems for converting
- terminal input and output.
-* Fontsets:: Fontsets are collections of fonts
- that cover the whole spectrum of characters.
-* Defining Fontsets:: Defining a new fontset.
-* Modifying Fontsets:: Modifying an existing fontset.
-* Undisplayable Characters::When characters don't display.
-* Unibyte Mode:: You can pick one European character set
- to use without multibyte characters.
-* Charsets:: How Emacs groups its internal character codes.
-
-Modes
-
-* Major Modes:: Text mode vs. Lisp mode vs. C mode...
-* Minor Modes:: Each minor mode is a feature you can turn on
- independently of any others.
-* Choosing Modes:: How modes are chosen when visiting files.
-
-Indentation
-
-* Indentation Commands:: Various commands and techniques for indentation.
-* Tab Stops:: You can set arbitrary "tab stops" and then
- indent to the next tab stop when you want to.
-* Just Spaces:: You can request indentation using just spaces.
-
-Commands for Human Languages
-
-* Words:: Moving over and killing words.
-* Sentences:: Moving over and killing sentences.
-* Paragraphs:: Moving over paragraphs.
-* Pages:: Moving over pages.
-* Filling:: Filling or justifying text.
-* Case:: Changing the case of text.
-* Text Mode:: The major modes for editing text files.
-* Outline Mode:: Editing outlines.
-* TeX Mode:: Editing input to the formatter TeX.
-* HTML Mode:: Editing HTML and SGML files.
-* Nroff Mode:: Editing input to the formatter nroff.
-* Formatted Text:: Editing formatted text directly in WYSIWYG fashion.
-* Text Based Tables:: Editing text-based tables in WYSIWYG fashion.
-* Two-Column:: Splitting text columns into separate windows.
-
-Filling Text
-
-* Auto Fill:: Auto Fill mode breaks long lines automatically.
-* Fill Commands:: Commands to refill paragraphs and center lines.
-* Fill Prefix:: Filling paragraphs that are indented
- or in a comment, etc.
-* Adaptive Fill:: How Emacs can determine the fill prefix automatically.
-
-Outline Mode
-
-* Outline Format:: What the text of an outline looks like.
-* Outline Motion:: Special commands for moving through
- outlines.
-* Outline Visibility:: Commands to control what is visible.
-* Outline Views:: Outlines and multiple views.
-* Foldout:: Folding means zooming in on outlines.
-
address@hidden Mode
-
-* TeX Editing:: Special commands for editing in TeX mode.
-* LaTeX Editing:: Additional commands for LaTeX input files.
-* TeX Print:: Commands for printing part of a file with TeX.
-* TeX Misc:: Customization of TeX mode, and related features.
-
-Editing Formatted Text
-
-* Requesting Formatted Text:: Entering and exiting Enriched mode.
-* Hard and Soft Newlines:: There are two different kinds of newlines.
-* Editing Format Info:: How to edit text properties.
-* Format Faces:: Bold, italic, underline, etc.
-* Format Colors:: Changing the color of text.
-* Format Indentation:: Changing the left and right margins.
-* Format Justification:: Centering, setting text flush with the
- left or right margin, etc.
-* Format Properties:: The "special" text properties submenu.
-* Forcing Enriched Mode:: How to force use of Enriched mode.
-
address@hidden The automatic texinfo menu update inserts some duplicate items
here
address@hidden (faces, colors, indentation, justification, properties), because
address@hidden they are listed in two menus. But we already have them above, no
address@hidden need to list them twice.
-
-Editing Text-based Tables
-
-* Table Definition:: What is a text based table.
-* Table Creation:: How to create a table.
-* Table Recognition:: How to activate and deactivate tables.
-* Cell Commands:: Cell-oriented commands in a table.
-* Cell Justification:: Justifying cell contents.
-* Row Commands:: Manipulating rows of table cell.
-* Column Commands:: Manipulating columns of table cell.
-* Fixed Width Mode:: Fixing cell width.
-* Table Conversion:: Converting between plain text and tables.
-* Measuring Tables:: Analyzing table dimension.
-* Table Misc:: Table miscellany.
-
-Editing Programs
-
-* Program Modes:: Major modes for editing programs.
-* Defuns:: Commands to operate on major top-level parts
- of a program.
-* Program Indent:: Adjusting indentation to show the nesting.
-* Parentheses:: Commands that operate on parentheses.
-* Comments:: Inserting, killing, and aligning comments.
-* Documentation:: Getting documentation of functions you plan to call.
-* Hideshow:: Displaying blocks selectively.
-* Symbol Completion:: Completion on symbol names of your program or language.
-* Glasses:: Making identifiersLikeThis more readable.
-* Semantic:: Suite of editing tools based on source code parsing.
-* Misc for Programs:: Other Emacs features useful for editing programs.
-* C Modes:: Special commands of C, C++, Objective-C,
- Java, and Pike modes.
-* Asm Mode:: Asm mode and its special features.
-* Fortran:: Fortran mode and its special features.
-
-Top-Level Definitions, or Defuns
-
-* Left Margin Paren:: An open-paren or similar opening delimiter
- starts a defun if it is at the left margin.
-* Moving by Defuns:: Commands to move over or mark a major definition.
-* Imenu:: Making buffer indexes as menus.
-* Which Function:: Which Function mode shows which function you are in.
-
-Indentation for Programs
-
-* Basic Indent:: Indenting a single line.
-* Multi-line Indent:: Commands to reindent many lines at once.
-* Lisp Indent:: Specifying how each Lisp function should be indented.
-* C Indent:: Extra features for indenting C and related modes.
-* Custom C Indent:: Controlling indentation style for C and related modes.
-
-Commands for Editing with Parentheses
-
-* Expressions:: Expressions with balanced parentheses.
-* Moving by Parens:: Commands for moving up, down and across
- in the structure of parentheses.
-* Matching:: Insertion of a close-delimiter flashes matching open.
-
-Manipulating Comments
-
-* Comment Commands:: Inserting, killing, and aligning comments.
-* Multi-Line Comments:: Commands for adding and editing multi-line comments.
-* Options for Comments::Customizing the comment features.
-
-Documentation Lookup
-
-* Info Lookup:: Looking up library functions and commands
- in Info files.
-* Man Page:: Looking up man pages of library functions and commands.
-* Lisp Doc:: Looking up Emacs Lisp functions, etc.
-
-C and Related Modes
-
-* Motion in C:: Commands to move by C statements, etc.
-* Electric C:: Colon and other chars can automatically reindent.
-* Hungry Delete:: A more powerful DEL command.
-* Other C Commands:: Filling comments, viewing expansion of macros,
- and other neat features.
-
-Fortran Mode
-
-* Fortran Motion:: Moving point by statements or subprograms.
-* Fortran Indent:: Indentation commands for Fortran.
-* Fortran Comments:: Inserting and aligning comments.
-* Fortran Autofill:: Auto fill support for Fortran.
-* Fortran Columns:: Measuring columns for valid Fortran.
-* Fortran Abbrev:: Built-in abbrevs for Fortran keywords.
-
-Fortran Indentation
-
-* ForIndent Commands:: Commands for indenting and filling Fortran.
-* ForIndent Cont:: How continuation lines indent.
-* ForIndent Num:: How line numbers auto-indent.
-* ForIndent Conv:: Conventions you must obey to avoid trouble.
-* ForIndent Vars:: Variables controlling Fortran indent style.
-
-Compiling and Testing Programs
-
-* Compilation:: Compiling programs in languages other
- than Lisp (C, Pascal, etc.).
-* Compilation Mode:: The mode for visiting compiler errors.
-* Compilation Shell:: Customizing your shell properly
- for use in the compilation buffer.
-* Grep Searching:: Searching with grep.
-* Flymake:: Finding syntax errors on the fly.
-* Debuggers:: Running symbolic debuggers for non-Lisp programs.
-* Executing Lisp:: Various modes for editing Lisp programs,
- with different facilities for running
- the Lisp programs.
-* Lisp Libraries:: Creating Lisp programs to run in Emacs.
-* Lisp Eval:: Executing a single Lisp expression in Emacs.
-* Lisp Interaction:: Executing Lisp in an Emacs buffer.
-* External Lisp:: Communicating through Emacs with a separate Lisp.
-
-Running Debuggers Under Emacs
-
-* Starting GUD:: How to start a debugger subprocess.
-* Debugger Operation:: Connection between the debugger and source buffers.
-* Commands of GUD:: Key bindings for common commands.
-* GUD Customization:: Defining your own commands for GUD.
-* GDB Graphical Interface:: An enhanced mode that uses GDB features to
- implement a graphical debugging environment through
- Emacs.
-
-GDB Graphical Interface
-
-* GDB User Interface Layout:: Control the number of displayed buffers.
-* Source Buffers:: Use the mouse in the fringe/margin to
- control your program.
-* Breakpoints Buffer:: A breakpoint control panel.
-* Threads Buffer:: Displays your threads.
-* Stack Buffer:: Select a frame from the call stack.
-* Other GDB Buffers:: Input/output, locals, registers,
- assembler, threads and memory buffers.
-* Watch Expressions:: Monitor variable values in the speedbar.
-* Multithreaded Debugging:: Debugging programs with several threads.
-
-Maintaining Large Programs
-
-* Version Control:: Using version control systems.
-* Change Log:: Maintaining a change history for your program.
-* Tags:: Go directly to any function in your program in one
- command. Tags remembers which file it is in.
-* EDE:: An integrated development environment for Emacs.
-* Emerge:: A convenient way of merging two versions of a program.
-
-Version Control
-
-* Introduction to VC:: How version control works in general.
-* VC Mode Line:: How the mode line shows version control status.
-* Basic VC Editing:: How to edit a file under version control.
-* Log Buffer:: Features available in log entry buffers.
-* Old Revisions:: Examining and comparing old versions.
-* Secondary VC Commands:: The commands used a little less frequently.
-* VC Directory Mode:: Listing files managed by version control.
-* Branches:: Multiple lines of development.
-* Remote Repositories:: Efficient access to remote CVS servers.
-* Revision Tags:: Symbolic names for revisions.
-* Miscellaneous VC:: Various other commands and features of VC.
-* Customizing VC:: Variables that change VC's behavior.
-
-Introduction to Version Control
-
-* Why Version Control?:: Understanding the problems it addresses.
-* Version Control Systems:: Supported version control back-end systems.
-* VCS Concepts:: Words and concepts related to version control.
-* VCS Merging:: How file conflicts are handled.
-* VCS Changesets:: Changesets in version control.
-* VCS Repositories:: Where version control repositories are stored.
-* Types of Log File:: The VCS log in contrast to the ChangeLog.
-
-Basic Editing under Version Control
-
-* VC With A Merging VCS:: Without locking: default mode for CVS.
-* VC With A Locking VCS:: RCS in its default mode, SCCS, and optionally CVS.
-* Advanced C-x v v:: Advanced features available with a prefix argument.
-
-The Secondary Commands of VC
-
-* Registering:: Putting a file under version control.
-* VC Change Log:: Viewing the VC Change Log.
-* VC Undo:: Canceling changes before or after check-in.
-
-VC Directory Mode
-
-* VC Directory Buffer:: What the buffer looks like and means.
-* VC Directory Commands:: Commands to use in a VC directory buffer.
-
-Multiple Branches of a File
-
-* Switching Branches:: How to get to another existing branch.
-* Creating Branches:: How to start a new branch.
-* Merging:: Transferring changes between branches.
-* Multi-User Branching:: Multiple users working at multiple branches
- in parallel.
-
-Remote Repositories
-
-* Version Backups:: Keeping local copies of repository versions.
-* Local Version Control:: Using another version system for local editing.
-
-Revision Tags
-
-* Making Revision Tags:: The tag facilities.
-* Revision Tag Caveats:: Things to be careful of when using tags.
-
-Miscellaneous Commands and Features of VC
-
-* Change Logs and VC:: Generating a change log file from log entries.
-* Renaming and VC:: A command to rename both the source and master
- file correctly.
-* Version Headers:: Inserting version control headers into working files.
-
-Customizing VC
-
-* General VC Options:: Options that apply to multiple back ends.
-* RCS and SCCS:: Options for RCS and SCCS.
-* CVS Options:: Options for CVS.
-
-Change Logs
-
-* Change Log Commands:: Commands for editing change log files.
-* Format of ChangeLog:: What the change log file looks like.
-
-Tags Tables
-
-* Tag Syntax:: Tag syntax for various types of code and text files.
-* Create Tags Table:: Creating a tags table with @code{etags}.
-* Etags Regexps:: Create arbitrary tags using regular expressions.
-* Select Tags Table:: How to visit a tags table.
-* Find Tag:: Commands to find the definition of a specific tag.
-* Tags Search:: Using a tags table for searching and replacing.
-* List Tags:: Listing and finding tags defined in a file.
-
-Merging Files with Emerge
-
-* Overview of Emerge:: How to start Emerge. Basic concepts.
-* Submodes of Emerge:: Fast mode vs. Edit mode.
- Skip Prefers mode and Auto Advance mode.
-* State of Difference:: You do the merge by specifying state A or B
- for each difference.
-* Merge Commands:: Commands for selecting a difference,
- changing states of differences, etc.
-* Exiting Emerge:: What to do when you've finished the merge.
-* Combining in Emerge:: How to keep both alternatives for a difference.
-* Fine Points of Emerge:: Miscellaneous issues.
-
-Abbrevs
-
-* Abbrev Concepts:: Fundamentals of defined abbrevs.
-* Defining Abbrevs:: Defining an abbrev, so it will expand when typed.
-* Expanding Abbrevs:: Controlling expansion: prefixes, canceling expansion.
-* Editing Abbrevs:: Viewing or editing the entire list of defined abbrevs.
-* Saving Abbrevs:: Saving the entire list of abbrevs for another session.
-* Dynamic Abbrevs:: Abbreviations for words already in the buffer.
-* Dabbrev Customization:: What is a word, for dynamic abbrevs. Case handling.
address@hidden
-Editing Pictures
-
-* Basic Picture:: Basic concepts and simple commands of Picture Mode.
-* Insert in Picture:: Controlling direction of cursor motion
- after "self-inserting" characters.
-* Tabs in Picture:: Various features for tab stops and indentation.
-* Rectangles in Picture:: Clearing and superimposing rectangles.
address@hidden ifnottex
-
-Dired, the Directory Editor
+Distribution
-* Dired Enter:: How to invoke Dired.
-* Dired Navigation:: Special motion commands in the Dired buffer.
-* Dired Deletion:: Deleting files with Dired.
-* Flagging Many Files:: Flagging files based on their names.
-* Dired Visiting:: Other file operations through Dired.
-* Marks vs Flags:: Flagging for deletion vs marking.
-* Operating on Files:: How to copy, rename, print, compress, etc.
- either one file or several files.
-* Shell Commands in Dired:: Running a shell command on the marked files.
-* Transforming File Names:: Using patterns to rename multiple files.
-* Comparison in Dired:: Running `diff' by way of Dired.
-* Subdirectories in Dired:: Adding subdirectories to the Dired buffer.
-* Subdir Switches:: Subdirectory switches in Dired.
-* Subdirectory Motion:: Moving across subdirectories, and up and down.
-* Hiding Subdirectories:: Making subdirectories visible or invisible.
-* Dired Updating:: Discarding lines for files of no interest.
-* Dired and Find:: Using `find' to choose the files for Dired.
-* Wdired:: Operating on files by editing the Dired buffer.
-* Image-Dired:: Viewing image thumbnails in Dired.
-* Misc Dired Features:: Various other features.
-
-The Calendar and the Diary
-
-* Calendar Motion:: Moving through the calendar; selecting a date.
-* Scroll Calendar:: Bringing earlier or later months onto the screen.
-* Counting Days:: How many days are there between two dates?
-* General Calendar:: Exiting or recomputing the calendar.
-* Writing Calendar Files:: Writing calendars to files of various formats.
-* Holidays:: Displaying dates of holidays.
-* Sunrise/Sunset:: Displaying local times of sunrise and sunset.
-* Lunar Phases:: Displaying phases of the moon.
-* Other Calendars:: Converting dates to other calendar systems.
-* Diary:: Displaying events from your diary.
-* Appointments:: Reminders when it's time to do something.
-* Importing Diary:: Converting diary events to/from other formats.
-* Daylight Saving:: How to specify when daylight saving time is active.
-* Time Intervals:: Keeping track of time intervals.
-* Advanced Calendar/Diary Usage:: Advanced Calendar/Diary customization.
-
-Movement in the Calendar
-
-* Calendar Unit Motion:: Moving by days, weeks, months, and years.
-* Move to Beginning or End:: Moving to start/end of weeks, months, and years.
-* Specified Dates:: Moving to the current date or another
- specific date.
-
-Conversion To and From Other Calendars
-
-* Calendar Systems:: The calendars Emacs understands
- (aside from Gregorian).
-* To Other Calendar:: Converting the selected date to various calendars.
-* From Other Calendar:: Moving to a date specified in another calendar.
-* Mayan Calendar:: Moving to a date specified in a Mayan calendar.
-
-The Diary
-
-* Displaying the Diary:: Viewing diary entries and associated calendar dates.
-* Format of Diary File:: Entering events in your diary.
-* Date Formats:: Various ways you can specify dates.
-* Adding to Diary:: Commands to create diary entries.
-* Special Diary Entries:: Anniversaries, blocks of dates, cyclic entries, etc.
-
-Customizing the Calendar and Diary
-
-* Calendar Customizing:: Calendar layout and hooks.
-* Holiday Customizing:: Defining your own holidays.
-* Date Display Format:: Changing the format.
-* Time Display Format:: Changing the format.
-* Diary Customizing:: Defaults you can set.
-* Non-Gregorian Diary:: Diary entries based on other calendars.
-* Diary Display:: A choice of ways to display the diary.
-* Fancy Diary Display:: Sorting diary entries, using included diary files.
-* Sexp Diary Entries:: More flexible diary entries.
-
-Document Viewing
-
-* Navigation:: Navigation inside DocView buffers.
-* Searching:: Searching inside documents.
-* Slicing:: Specifying which part of pages should be displayed.
-* Conversion:: Influencing and triggering conversion.
-
-Sending Mail
-
-* Mail Format:: Format of the mail being composed.
-* Mail Headers:: Details of some standard mail header fields.
-* Mail Aliases:: Abbreviating and grouping mail addresses.
-* Mail Commands:: Special commands for editing mail being composed.
-* Mail Signature:: Adding a signature to every message.
-* Mail Amusements:: Distracting the NSA; adding fortune messages.
-* Mail Methods:: Using alternative mail-composition methods.
-
-Mail Commands
-
-* Mail Sending:: Commands to send the message.
-* Header Editing:: Commands to move to header fields and edit them.
-* Citing Mail:: Quoting a message you are replying to.
-* Mail Misc:: Attachments, spell checking, etc.
-
-Reading Mail with Rmail
-
-* Rmail Basics:: Basic concepts of Rmail, and simple use.
-* Rmail Scrolling:: Scrolling through a message.
-* Rmail Motion:: Moving to another message.
-* Rmail Deletion:: Deleting and expunging messages.
-* Rmail Inbox:: How mail gets into the Rmail file.
-* Rmail Files:: Using multiple Rmail files.
-* Rmail Output:: Copying message out to files.
-* Rmail Labels:: Classifying messages by labeling them.
-* Rmail Attributes:: Certain standard labels, called attributes.
-* Rmail Reply:: Sending replies to messages you are viewing.
-* Rmail Summary:: Summaries show brief info on many messages.
-* Rmail Sorting:: Sorting messages in Rmail.
-* Rmail Display:: How Rmail displays a message; customization.
-* Rmail Coding:: How Rmail handles decoding character sets.
-* Rmail Editing:: Editing message text and headers in Rmail.
-* Rmail Digest:: Extracting the messages from a digest message.
-* Rmail Rot13:: Reading messages encoded in the rot13 code.
-* Movemail:: More details of fetching new mail.
-* Remote Mailboxes:: Retrieving mail from remote mailboxes.
-* Other Mailbox Formats:: Retrieving mail from local mailboxes in
- various formats.
-
-Rmail Summaries
-
-* Rmail Make Summary:: Making various sorts of summaries.
-* Rmail Summary Edit:: Manipulating messages from the summary.
-
-Gnus
-
-* Buffers of Gnus:: The group, summary, and article buffers.
-* Gnus Startup:: What you should know about starting Gnus.
-* Summary of Gnus:: A short description of the basic Gnus commands.
-
-Running Shell Commands from Emacs
-
-* Single Shell:: How to run one shell command and return.
-* Interactive Shell:: Permanent shell taking input via Emacs.
-* Shell Mode:: Special Emacs commands used with permanent shell.
-* Shell Prompts:: Two ways to recognize shell prompts.
-* Shell History:: Repeating previous commands in a shell buffer.
-* Directory Tracking:: Keeping track when the subshell changes directory.
-* Shell Options:: Options for customizing Shell mode.
-* Terminal emulator:: An Emacs window as a terminal emulator.
-* Term Mode:: Special Emacs commands used in Term mode.
-* Paging in Term:: Paging in the terminal emulator.
-* Remote Host:: Connecting to another computer.
-* Serial Terminal:: Connecting to a serial port.
-
-Shell Command History
-
-* Shell Ring:: Fetching commands from the history list.
-* Shell History Copying::Moving to a command and then copying it.
-* History References:: Expanding @samp{!}-style history references.
-
-Using Emacs as a Server
-
-* Invoking emacsclient:: Connecting to the Emacs server.
-* emacsclient Options:: Emacs client startup options.
-
-Printing Hard Copies
-
-* PostScript:: Printing buffers or regions as PostScript.
-* PostScript Variables:: Customizing the PostScript printing commands.
-* Printing Package:: An optional advanced printing interface.
-
-Hyperlinking and Navigation Features
-
-* Browse-URL:: Following URLs.
-* Goto Address mode:: Activating URLs.
-* FFAP:: Finding files etc. at point.
-
-Emacs Lisp Packages
-
-* Package Menu:: Buffer for viewing and managing packages.
-* Package Installation:: Options for package installation.
-* Package Files:: Where packages are installed.
-
-Customization
-
-* Easy Customization:: Convenient way to browse and change settings.
-* Variables:: Many Emacs commands examine Emacs variables
- to decide what to do; by setting variables,
- you can control their functioning.
-* Key Bindings:: Keymaps say what command each key runs.
- By changing them, you can "redefine" keys.
-* Init File:: How to write common customizations in the
- @file{.emacs} file.
-
-Easy Customization Interface
-
-* Customization Groups:: How settings are classified in a structure.
-* Browsing Custom:: Browsing and searching for settings.
-* Changing a Variable:: How to edit an option's value and set the option.
-* Saving Customizations:: Specifying the file for saving customizations.
-* Face Customization:: How to edit the attributes of a face.
-* Specific Customization:: Making a customization buffer for specific
- variables, faces, or groups.
-* Custom Themes:: How to define collections of customized options
- that can be loaded and unloaded together.
-
-Variables
-
-* Examining:: Examining or setting one variable's value.
-* Hooks:: Hook variables let you specify programs for parts
- of Emacs to run on particular occasions.
-* Locals:: Per-buffer values of variables.
-* File Variables:: How files can specify variable values.
-* Directory Variables:: How variable values can be specified by directory.
-
-Local Variables in Files
-
-* Specifying File Variables:: Specifying file local variables.
-* Safe File Variables:: Making sure file local variables are safe.
-
-Customizing Key Bindings
-
-* Keymaps:: Generalities. The global keymap.
-* Prefix Keymaps:: Keymaps for prefix keys.
-* Local Keymaps:: Major and minor modes have their own keymaps.
-* Minibuffer Maps:: The minibuffer uses its own local keymaps.
-* Rebinding:: How to redefine one key's meaning conveniently.
-* Init Rebinding:: Rebinding keys with your init file, @file{.emacs}.
-* Modifier Keys:: Using modifier keys in key bindings.
-* Function Keys:: Rebinding terminal function keys.
-* Named ASCII Chars:: Distinguishing @key{TAB} from @kbd{C-i}, and so on.
-* Mouse Buttons:: Rebinding mouse buttons in Emacs.
-* Disabling:: Disabling a command means confirmation is required
- before it can be executed. This is done to protect
- beginners from surprises.
-
-The Init File, @file{~/.emacs}
-
-* Init Syntax:: Syntax of constants in Emacs Lisp.
-* Init Examples:: How to do some things with an init file.
-* Terminal Init:: Each terminal type can have an init file.
-* Find Init:: How Emacs finds the init file.
-* Init Non-ASCII:: Using address@hidden characters in an init file.
-
-Dealing with Emacs Trouble
-
-* DEL Does Not Delete:: What to do if @key{DEL} doesn't delete.
-* Stuck Recursive:: `[...]' in mode line around the parentheses.
-* Screen Garbled:: Garbage on the screen.
-* Text Garbled:: Garbage in the text.
-* Memory Full:: How to cope when you run out of memory.
-* After a Crash:: Recovering editing in an Emacs session that crashed.
-* Emergency Escape:: Emergency escape---
- What to do if Emacs stops responding.
-* Total Frustration:: When you are at your wits' end.
-
-Reporting Bugs
-
-* Known Problems:: How to read about known problems and bugs.
-* Bug Criteria:: Have you really found a bug?
-* Understanding Bug Reporting:: How to report a bug effectively.
-* Checklist:: Steps to follow for a good bug report.
-* Sending Patches:: How to send a patch for GNU Emacs.
-
-Command Line Arguments for Emacs Invocation
-
-* Action Arguments:: Arguments to visit files, load libraries,
- and call functions.
-* Initial Options:: Arguments that take effect while starting Emacs.
-* Command Example:: Examples of using command line arguments.
-* Resume Arguments:: Specifying arguments when you resume a running Emacs.
-* Environment:: Environment variables that Emacs uses.
-* Display X:: Changing the default display and using remote login.
-* Font X:: Choosing a font for text, under X.
-* Colors:: Choosing display colors.
-* Window Size X:: Start-up window size, under X.
-* Borders X:: Internal and external borders, under X.
-* Title X:: Specifying the initial frame's title.
-* Icons X:: Choosing what sort of icon to use, under X.
-* Misc X:: Other display options.
-
-Environment Variables
-
-* General Variables:: Environment variables that all versions of Emacs use.
-* Misc Variables:: Certain system-specific variables.
-* MS-Windows Registry:: An alternative to the environment on MS-Windows.
-
-X Options and Resources
-
-* Resources:: Using X resources with Emacs (in general).
-* Table of Resources:: Table of specific X resources that affect Emacs.
-* Face Resources:: X resources for customizing faces.
-* Lucid Resources:: X resources for Lucid menus.
-* LessTif Resources:: X resources for LessTif and Motif menus.
-* GTK resources:: Resources for GTK widgets.
-
-GTK resources
-
-* GTK widget names:: How widgets in GTK are named in general.
-* GTK Names in Emacs:: GTK widget names in Emacs.
-* GTK styles:: What can be customized in a GTK widget.
-
-Emacs and Mac OS / GNUstep
-
-* Mac / GNUstep Basics:: Basic Emacs usage under GNUstep or Mac OS.
-* Mac / GNUstep Customization:: Customizations under GNUstep or Mac OS.
-* Mac / GNUstep Events:: How window system events are handled.
-* GNUstep Support:: Details on status of GNUstep support.
-
-Emacs and Microsoft Windows/MS-DOS
-
-* Windows Startup:: How to start Emacs on Windows.
-* Text and Binary:: Text files use CRLF to terminate lines.
-* Windows Files:: File-name conventions on Windows.
-* ls in Lisp:: Emulation of @code{ls} for Dired.
-* Windows HOME:: Where Emacs looks for your @file{.emacs}.
-* Windows Keyboard:: Windows-specific keyboard features.
-* Windows Mouse:: Windows-specific mouse features.
-* Windows Processes:: Running subprocesses on Windows.
-* Windows Printing:: How to specify the printer on MS-Windows.
-* Windows Fonts:: Specifying fonts on MS-Windows.
-* Windows Misc:: Miscellaneous Windows features.
-* MS-DOS:: Using Emacs on MS-DOS (otherwise known as
@dfn{MS-DOG}).
-
-Emacs and MS-DOS
-
-* MS-DOS Keyboard:: Keyboard conventions on MS-DOS.
-* MS-DOS Mouse:: Mouse conventions on MS-DOS.
-* MS-DOS Display:: Fonts, frames and display size on MS-DOS.
-* MS-DOS File Names:: File name conventions on MS-DOS.
-* MS-DOS Printing:: Printing specifics on MS-DOS.
-* MS-DOS and MULE:: Support for internationalization on MS-DOS.
-* MS-DOS Processes:: Running subprocesses on MS-DOS.
+* Acknowledgments::
@end detailmenu
@end menu
@@ -1341,7 +284,11 @@
occasionally, or subscribing to periodic updates.
@iftex
address@hidden Acknowledgments, Intro, Distrib, Top
address@hidden
+* Acknowledgments::
address@hidden menu
+
address@hidden Acknowledgments, , Distrib, Distrib
@unnumberedsec Acknowledgments
Contributors to GNU Emacs include Jari Aalto, Per Abrahamsen, Tomas
@@ -1428,7 +375,7 @@
Neal Ziring, Teodor Zlatanov, and Detlev Zundel.
@end iftex
address@hidden Intro, Glossary, Distrib, Top
address@hidden Intro, Copying, Distrib, Top
@unnumbered Introduction
You are reading about GNU Emacs, the GNU incarnation of the
@@ -1509,11 +456,11 @@
@include custom.texi
@include trouble.texi
address@hidden Copying, GNU Free Documentation License, Service, Top
address@hidden Copying, GNU Free Documentation License, Intro, Top
@appendix GNU GENERAL PUBLIC LICENSE
@include gpl.texi
address@hidden GNU Free Documentation License, Emacs Invocation, Copying, Top
address@hidden GNU Free Documentation License, Key Index, Copying, Top
@appendix GNU Free Documentation License
@include doclicense.texi
@@ -1540,13 +487,13 @@
@c It is not after Concept Index for similar reasons.
@iftex
address@hidden Key Index, Command Index, Glossary, Top
address@hidden Key Index, Key Index, GNU Free Documentation License, Top
@unnumbered Key (Character) Index
@printindex ky
@end iftex
@ifnottex
address@hidden Key Index, Option Index, Glossary, Top
address@hidden Key Index, Option Index, Key Index, Top
@unnumbered Key (Character) Index
@printindex ky
@@ -1554,13 +501,13 @@
@unnumbered Command-Line Options Index
@printindex op
address@hidden Command Index, Variable Index, Option Index, Top
address@hidden Command Index, Command Index, Option Index, Top
@unnumbered Command and Function Index
@printindex fn
@end ifnottex
@iftex
address@hidden Command Index, Variable Index, Key Index, Top
address@hidden Command Index, Variable Index, Command Index, Top
@unnumbered Command and Function Index
@printindex fn
@end iftex
@@ -1569,7 +516,7 @@
@unnumbered Variable Index
@printindex vr
address@hidden Concept Index, Acknowledgments, Variable Index, Top
address@hidden Concept Index, , Variable Index, Top
@unnumbered Concept Index
@printindex cp
~/scratch/emacs.texi:515: Prev field of node `Variable Index' not pointed to.
~/scratch/emacs.texi:504: This node (Command Index) has the bad Next.
~/scratch/emacs.texi:504: Next field of node `Command Index' not pointed to
(perhaps incorrect sectioning?).
~/scratch/emacs.texi:504: This node (Command Index) has the bad Prev.
~/scratch/emacs.texi:496: Prev field of node `Key Index' not pointed to.
~/scratch/emacs.texi:496: This node (Key Index) has the bad Next.
~/scratch/ack.texi:6: Prev field of node `Acknowledgments' not pointed to.
~/scratch/emacs.texi:519: This node (Concept Index) has the bad Next.
~/scratch/glossary.texi:5: Next field of node `Glossary' not pointed to
(perhaps incorrect sectioning?).
~/scratch/emacs.texi:496: This node (Key Index) has the bad Prev.
~/scratch/glossary.texi:5: Prev field of node `Glossary' not pointed to.
~/scratch/emacs.texi:378: This node (Intro) has the bad Next.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Glossary' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Manifesto' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Microsoft Windows'
despite being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Mac OS / GNUstep'
despite being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Antinews' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `X Resources' despite
being its Up target.
~/scratch/cmdargs.texi:5: Prev field of node `Emacs Invocation' not pointed to.
~/scratch/emacs.texi:463: This node (GNU Free Documentation License) has the
bad Next.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Emacs Invocation'
despite being its Up target.
~/scratch/emacs.texi:463: Next field of node `GNU Free Documentation License'
not pointed to (perhaps incorrect sectioning?).
~/scratch/emacs.texi:496: This node (Key Index) has the bad Prev.
~/scratch/trouble.texi:1106: Next field of node `Service' not pointed to
(perhaps incorrect sectioning?).
~/scratch/emacs.texi:459: This node (Copying) has the bad Prev.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Service' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Contributing' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Bugs' despite being
its Up target.
~/scratch/trouble.texi:136: Prev field of node `Lossage' not pointed to.
~/scratch/trouble.texi:18: This node (Quitting) has the bad Next.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Lossage' despite being
its Up target.
~/scratch/trouble.texi:18: `Quitting' has no Up field (perhaps incorrect
sectioning?).
~/scratch/custom.texi:5: `Customization' has no Up field (perhaps incorrect
sectioning?).
~/scratch/package.texi:5: `Packages' has no Up field (perhaps incorrect
sectioning?).
~/scratch/misc.texi:2521: Next field of node `Amusements' not pointed to
(perhaps incorrect sectioning?).
~/scratch/package.texi:5: This node (Packages) has the bad Prev.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Amusements' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Hyperlinking' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Emulation' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Recursive Edit'
despite being its Up target.
~/scratch/misc.texi:2129: Prev field of node `Saving Emacs Sessions' not
pointed to.
~/scratch/misc.texi:2073: This node (Editing Binary Files) has the bad Next.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Saving Emacs Sessions'
despite being its Up target.
~/scratch/misc.texi:2073: `Editing Binary Files' has no Up field (perhaps
incorrect sectioning?).
~/scratch/picture-xtra.texi:7: `Picture Mode' has no Up field (perhaps
incorrect sectioning?).
~/scratch/misc.texi:1932: `Sorting' has no Up field (perhaps incorrect
sectioning?).
~/scratch/misc.texi:1651: Next field of node `Printing' not pointed to (perhaps
incorrect sectioning?).
~/scratch/misc.texi:1932: This node (Sorting) has the bad Prev.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Printing' despite
being its Up target.
~/scratch/misc.texi:1369: Prev field of node `Emacs Server' not pointed to.
~/scratch/misc.texi:414: This node (Shell) has the bad Next.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Emacs Server' despite
being its Up target.
~/scratch/misc.texi:414: `Shell' has no Up field (perhaps incorrect
sectioning?).
~/scratch/misc.texi:234: `Document View' has no Up field (perhaps incorrect
sectioning?).
~/scratch/misc.texi:23: `Gnus' has no Up field (perhaps incorrect sectioning?).
~/scratch/rmail.texi:5: `Rmail' has no Up field (perhaps incorrect sectioning?).
~/scratch/sending.texi:5: `Sending Mail' has no Up field (perhaps incorrect
sectioning?).
~/scratch/calendar.texi:5: `Calendar/Diary' has no Up field (perhaps incorrect
sectioning?).
~/scratch/dired.texi:5: `Dired' has no Up field (perhaps incorrect sectioning?).
~/scratch/abbrevs.texi:5: `Abbrevs' has no Up field (perhaps incorrect
sectioning?).
~/scratch/maintaining.texi:5: Next field of node `Maintaining' not pointed to
(perhaps incorrect sectioning?).
~/scratch/abbrevs.texi:5: This node (Abbrevs) has the bad Prev.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Maintaining' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Building' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Programs' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Text' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Indentation' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Modes' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `International' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Frames' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Windows' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Buffers' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Files' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Keyboard Macros'
despite being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Fixit' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Search' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Display' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Registers' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Killing' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Mark' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Help' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `M-x' despite being its
Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Minibuffer' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Basic' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Exiting' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Entering Emacs'
despite being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Commands' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Keys' despite being
its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `User Input' despite
being its Up target.
~/scratch/emacs.texi:97: Node `Top' lacks menu item for `Screen' despite being
its Up target.
~/scratch/glossary.texi:5: warning: unreferenced node `Glossary'.
makeinfo: Removing output file `~/scratch/emacs' due to errors; use --force to
preserve.