|
From: | GNU bug Tracking System |
Subject: | bug#35852: closed (Disk device disappears before installer can mount it) |
Date: | Fri, 26 Nov 2021 01:33:03 +0000 |
Your message dated Fri, 26 Nov 2021 02:26:09 +0100 with message-id <86y25br9la.fsf@gmail.com> and subject line Re: bug#35852: Bug 35852 has caused the debbugs.gnu.org bug report #35852, regarding Disk device disappears before installer can mount it to be marked as done. (If you believe you have received this mail in error, please contact help-debbugs@gnu.org.) -- 35852: http://debbugs.gnu.org/cgi/bugreport.cgi?bug=35852 GNU Bug Tracking System Contact help-debbugs@gnu.org with problems
--- Begin Message ---Subject: Disk device disappears before installer can mount it Date: Wed, 22 May 2019 00:20:15 +0100
Hi everyone, I’ve retried installation using the 1.0.1 ISO (you may remember me from such bug reports as “Filesystem error in the installer”). The good news is that the FAT16 EFI partition no longer confuses the partition editor. The bad news…To recap, I’m choosing the guided partition scheme, with everything in a single partition. The installer proposes a reasonable scheme: it keeps my EFI partition, then a big e4fs, then a Linux swap partition. I accept that, and go through connecting to a network, setting root password, adding a user, and choosing desktop and daemon packages. Then the next error.> In procedure mount: mount “/dev/sda1” on “/mnt/boot/efi”: No such deviceIndeed if I press OK and rerun to the installer, then the next time it gets to the partition page it won’t see the SSD. It doesn’t get detected again until a reboot.The SSD is Samsung SSD PM871 mSATA 256GBI will try to replicate this by partitioning the disk at the manual installer shell, to capture dmesg output.Thanks,Graham.
--- End Message ---
--- Begin Message ---Subject: Re: bug#35852: Bug 35852 Date: Fri, 26 Nov 2021 02:26:09 +0100 User-agent: Gnus/5.13 (Gnus v5.13) Emacs/27.1 (gnu/linux) Hi, On Wed, 22 May 2019 at 09:34, Graham Lee <iamleeg@gmail.com> wrote: > I was unable to reproduce the problem with the command line installer (I used > parted to set up partitions on the SSD). I was able to at least get to the > “guix system init” stage, which is currently still running. The bug is marked ’moreinfo’ since Apr. 2021. The submitter has not provided more info after 2019. So closing. If I miss something, feel free to reopen. <http://issues.guix.gnu.org/issue/35852> Cheers, simon
--- End Message ---
[Prev in Thread] | Current Thread | [Next in Thread] |