[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Dvdrtools-users] burning woes
From: |
Sean |
Subject: |
Re: [Dvdrtools-users] burning woes |
Date: |
Sat, 7 Sep 2002 16:33:17 -0400 |
User-agent: |
KMail/1.4.3 |
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have a Dual Athlon 1800+ MP system on a Tyan Tiger MP board, and in order
for my Pioneer A04 DVD burner to work, I have to first run:
hdparm -d 0 -r 0 /dev/hda (it's on my IDE channel) From what you describe,
sounds like yours should be hdb.
If I don't first do that, then I get the exact same kinds of errors, but after
the hdparm thing, everything burns just fine.
Hope it works for you too!
Sean
On Saturday 07 September 2002 02:55 pm, Atish Nazir wrote:
> Hellow!
> Just tried burning my first DVD on my new shiney Linux box and much to
> my
> disappointment it didn't work with either dvdrecord or cdrecord-prodvd.
> Rather worryingly when I cranked up the debug verbosity the SCSI
> transport was complaining about, well here's a pasting:
>
> dvdrecord: Input/output error. test unit ready: scsi sendcmd: no error
> CDB: 00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 04 00 00 00 00 0C 00 00 00 00 09 02 00 00
> Sense Key: 0x4 Hardware Error, Segment 0
> Sense Code: 0x09 Qual 0x02 (focus servo failure) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 40s
>
> !!! It's a brand new drive (2 weeks old) and I have already burnt a few
> normal CDs on it under Linux with no problems :o\ Here's a break down
> of relevant specs on the machine:
>
> 2.4.19 SMP (dual Athlon MP2100, running on a Tyan S2466MPX)
> Generic SCSI support and SCSI CD compiled in
>
> Sony ATAPI DRU-210A
> ide0 slave with data source ide1 master
>
> Here's the output of a query:
>
> address@hidden:/behemoth/cdimages$ dvdrecord -inq dev=0,0,0
> dvdrtools - based on:
> Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg
> Schilling
> scsidev: '0,0,0'
> scsibus: 0 target: 0 lun: 0
> Linux sg driver version: 3.1.24
> Using libscg version 'schily-0.5'
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'SONY '
> Identifikation : 'DVD+RW DRU-120A'
> Revision : '1.13'
> Device seems to be: Generic mmc2 DVD-ROM.
>
>
> Ideas would be most appreciated :o)
> Thanks in advance,
> 'tish.
>
> PS.
> * the ISO image that I made under mkisofs works fine when I mount it via
> a loopback...
>
>
> _______________________________________________
> Dvdrtools-users mailing list
> address@hidden
> http://mail.freesoftware.fsf.org/mailman/listinfo/dvdrtools-users
- --
GPG Public Key available: http://sean.gutenpress.org/sean.asc
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)
iD8DBQE9emKQEEGQgHny9sQRAtgZAJ9ZNfNQulfItD8fw1wxB6kULWAQRQCgjJxH
Tobn6c+qmkSVDpjlHsuV7uY=
=WMhk
-----END PGP SIGNATURE-----