[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Dotgnu-libs-commits] CVS: dotgnu.rdf/debian README.Debian,NONE,1.1 cha
From: |
James Michael DuPont <address@hidden> |
Subject: |
[Dotgnu-libs-commits] CVS: dotgnu.rdf/debian README.Debian,NONE,1.1 changelog,NONE,1.1 conffiles.ex,NONE,1.1 control,NONE,1.1 copyright,NONE,1.1 cron.d.ex,NONE,1.1 dirs,NONE,1.1 docs,NONE,1.1 dotgnu.rdf-dev.dirs,NONE,1.1 dotgnu.rdf-dev.files,NONE,1.1 dotgnu.rdf1.dirs,NONE,1.1 dotgnu.rdf1.files,NONE,1.1 emacsen-install.ex,NONE,1.1 emacsen-remove.ex,NONE,1.1 emacsen-startup.ex,NONE,1.1 ex.package.doc-base,NONE,1.1 files,NONE,1.1 init.d.ex,NONE,1.1 manpage.1.ex,NONE,1.1 manpage.sgml.ex,NONE,1.1 menu.ex,NONE,1.1 postinst.ex,NONE,1.1 postrm.ex,NONE,1.1 preinst.ex,NONE,1.1 prerm.ex,NONE,1.1 rules,NONE,1.1 shlibs.local.ex,NONE,1.1 watch.ex,NONE,1.1 |
Date: |
Sun, 16 Feb 2003 11:30:20 -0500 |
Update of /cvsroot/dotgnu-libs/dotgnu.rdf/debian
In directory subversions:/tmp/cvs-serv624
Added Files:
README.Debian changelog conffiles.ex control copyright
cron.d.ex dirs docs dotgnu.rdf-dev.dirs dotgnu.rdf-dev.files
dotgnu.rdf1.dirs dotgnu.rdf1.files emacsen-install.ex
emacsen-remove.ex emacsen-startup.ex ex.package.doc-base files
init.d.ex manpage.1.ex manpage.sgml.ex menu.ex postinst.ex
postrm.ex preinst.ex prerm.ex rules shlibs.local.ex watch.ex
Log Message:
added debian
--- NEW FILE ---
dotgnu.rdf for Debian
---------------------
<possible notes regarding this package - if none, delete this file>
-- James Michael DuPont <address@hidden>, Sat, 8 Feb 2003 19:20:46 +0100
--- NEW FILE ---
dotgnu.rdf (0.2-1) unstable; urgency=low
* Initial Release.
-- James Michael DuPont <address@hidden> Sat, 8 Feb 2003 19:20:46 +0100
--- NEW FILE ---
#
# If you want to use this conffile, remove all comments and put files that
# you want dpkg to process here using their absolute pathnames.
# See the policy manual
#
# for example:
# /etc/dotgnu.rdf/dotgnu.rdf.conf
--- NEW FILE ---
Source: dotgnu.rdf
Priority: optional
Maintainer: James Michael DuPont <address@hidden>
Build-Depends: debhelper (>> 3.0.0)
Standards-Version: 3.5.8
Package: dotgnu.rdf-dev
Section: devel
Architecture: any
Depends: dotgnu.rdf (= ${Source-Version})
Description: do i need this
what about this
Package: dotgnu.rdf
Section: libs
Architecture: any
Depends: ${shlibs:Depends}
Description: the rdf lib for dotgnu
this is for all dotgnuers out there!
--- NEW FILE ---
This package was debianized by James Michael DuPont <address@hidden> on
Sat, 8 Feb 2003 19:20:46 +0100.
It was downloaded from <fill in ftp site>
Upstream Author(s): <put author(s) name and email here>
Copyright:
<Must follow here>
--- NEW FILE ---
#
# Regular cron jobs for the dotgnu.rdf package
#
0 4 * * * root dotgnu.rdf_maintenance
--- NEW FILE ---
usr/bin
usr/sbin
--- NEW FILE ---
ChangeLog.bak
--- NEW FILE ---
usr/lib
usr/include
--- NEW FILE ---
usr/include/*
usr/lib/lib*.a
usr/lib/lib*.so
usr/lib/pkgconfig/*
/usr/lib/*.la
--- NEW FILE ---
usr/lib
--- NEW FILE ---
usr/lib/lib*.so.*
--- NEW FILE ---
#! /bin/sh -e
# /usr/lib/emacsen-common/packages/install/dotgnu.rdf
# Written by Jim Van Zandt <address@hidden>, borrowing heavily
# from the install scripts for gettext by Santiago Vila
# <address@hidden> and octave by Dirk Eddelbuettel <address@hidden>.
FLAVOR=$1
PACKAGE=dotgnu.rdf
if [ ${FLAVOR} = emacs ]; then exit 0; fi
echo install/${PACKAGE}: Handling install for emacsen flavor ${FLAVOR}
#FLAVORTEST=`echo $FLAVOR | cut -c-6`
#if [ ${FLAVORTEST} = xemacs ] ; then
# SITEFLAG="-no-site-file"
#else
# SITEFLAG="--no-site-file"
#fi
FLAGS="${SITEFLAG} -q -batch -l path.el -f batch-byte-compile"
ELDIR=/usr/share/emacs/site-lisp/${PACKAGE}
ELCDIR=/usr/share/${FLAVOR}/site-lisp/${PACKAGE}
# Install-info-altdir does not actually exist.
# Maybe somebody will write it.
if test -x /usr/sbin/install-info-altdir; then
echo install/${PACKAGE}: install Info links for ${FLAVOR}
install-info-altdir --quiet --section "" "" --dirname=${FLAVOR}
/usr/info/${PACKAGE}.info.gz
fi
install -m 755 -d ${ELCDIR}
cd ${ELDIR}
FILES=`echo *.el`
cp ${FILES} ${ELCDIR}
cd ${ELCDIR}
cat << EOF > path.el
(setq load-path (cons "." load-path) byte-compile-warnings nil)
EOF
${FLAVOR} ${FLAGS} ${FILES}
rm -f *.el path.el
exit 0
--- NEW FILE ---
#!/bin/sh -e
# /usr/lib/emacsen-common/packages/remove/dotgnu.rdf
FLAVOR=$1
PACKAGE=dotgnu.rdf
if [ ${FLAVOR} != emacs ]; then
if test -x /usr/sbin/install-info-altdir; then
echo remove/${PACKAGE}: removing Info links for ${FLAVOR}
install-info-altdir --quiet --remove --dirname=${FLAVOR}
/usr/info/dotgnu.rdf.info.gz
fi
echo remove/${PACKAGE}: purging byte-compiled files for ${FLAVOR}
rm -rf /usr/share/${FLAVOR}/site-lisp/${PACKAGE}
fi
--- NEW FILE ---
;; -*-emacs-lisp-*-
;;
;; Emacs startup file for the Debian GNU/Linux dotgnu.rdf package
;;
;; Originally contributed by Nils Naumann <address@hidden>
;; Modified by Dirk Eddelbuettel <address@hidden>
;; Adapted for dh-make by Jim Van Zandt <address@hidden>
;; The dotgnu.rdf package follows the Debian/GNU Linux 'emacsen' policy and
;; byte-compiles its elisp files for each 'emacs flavor' (emacs19,
;; xemacs19, emacs20, xemacs20...). The compiled code is then
;; installed in a subdirectory of the respective site-lisp directory.
;; We have to add this to the load-path:
(setq load-path (cons (concat "/usr/share/"
(symbol-name flavor)
"/site-lisp/dotgnu.rdf") load-path))
--- NEW FILE ---
Document: dotgnu.rdf
Title: Debian dotgnu.rdf Manual
Author: <insert document author here>
Abstract: This manual describes what dotgnu.rdf is
and how it can be used to
manage online manuals on Debian systems.
Section: unknown
Format: debiandoc-sgml
Files: /usr/share/doc/dotgnu.rdf/dotgnu.rdf.sgml.gz
Format: postscript
Files: /usr/share/doc/dotgnu.rdf/dotgnu.rdf.ps.gz
Format: text
Files: /usr/share/doc/dotgnu.rdf/dotgnu.rdf.text.gz
Format: HTML
Index: /usr/share/doc/dotgnu.rdf/html/index.html
Files: /usr/share/doc/dotgnu.rdf/html/*.html
--- NEW FILE ---
dotgnu.rdf-dev_0.2-1_i386.deb devel optional
dotgnu.rdf_0.2-1_i386.deb libs optional
--- NEW FILE ---
#! /bin/sh
#
# skeleton example file to build /etc/init.d/ scripts.
# This file should be used to construct scripts for /etc/init.d.
#
# Written by Miquel van Smoorenburg <address@hidden>.
# Modified for Debian GNU/Linux
# by Ian Murdock <address@hidden>.
#
# Version: @(#)skeleton 1.9 26-Feb-2001 address@hidden
#
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
DAEMON=/usr/sbin/dotgnu.rdf
NAME=dotgnu.rdf
DESC=dotgnu.rdf
test -x $DAEMON || exit 0
set -e
case "$1" in
start)
echo -n "Starting $DESC: "
start-stop-daemon --start --quiet --pidfile /var/run/$NAME.pid \
--exec $DAEMON
echo "$NAME."
;;
stop)
echo -n "Stopping $DESC: "
start-stop-daemon --stop --quiet --pidfile /var/run/$NAME.pid \
--exec $DAEMON
echo "$NAME."
;;
#reload)
#
# If the daemon can reload its config files on the fly
# for example by sending it SIGHUP, do it here.
#
# If the daemon responds to changes in its config file
# directly anyway, make this a do-nothing entry.
#
# echo "Reloading $DESC configuration files."
# start-stop-daemon --stop --signal 1 --quiet --pidfile \
# /var/run/$NAME.pid --exec $DAEMON
#;;
restart|force-reload)
#
# If the "reload" option is implemented, move the "force-reload"
# option to the "reload" entry above. If not, "force-reload" is
# just the same as "restart".
#
echo -n "Restarting $DESC: "
start-stop-daemon --stop --quiet --pidfile \
/var/run/$NAME.pid --exec $DAEMON
sleep 1
start-stop-daemon --start --quiet --pidfile \
/var/run/$NAME.pid --exec $DAEMON
echo "$NAME."
;;
*)
N=/etc/init.d/$NAME
# echo "Usage: $N {start|stop|restart|reload|force-reload}" >&2
echo "Usage: $N {start|stop|restart|force-reload}" >&2
exit 1
;;
esac
exit 0
--- NEW FILE ---
.\" Hey, EMACS: -*- nroff -*-
.\" First parameter, NAME, should be all caps
.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
.\" other parameters are allowed: see man(7), man(1)
.TH DOTGNU.RDF SECTION "February 8, 2003"
.\" Please adjust this date whenever revising the manpage.
.\"
.\" Some roff macros, for reference:
.\" .nh disable hyphenation
.\" .hy enable hyphenation
.\" .ad l left justify
.\" .ad b justify to both left and right margins
.\" .nf disable filling
.\" .fi enable filling
.\" .br insert line break
.\" .sp <n> insert n+1 empty lines
.\" for manpage-specific macros, see man(7)
.SH NAME
dotgnu.rdf \- program to do something
.SH SYNOPSIS
.B dotgnu.rdf
.RI [ options ] " files" ...
.br
.B bar
.RI [ options ] " files" ...
.SH DESCRIPTION
This manual page documents briefly the
.B dotgnu.rdf
and
.B bar
commands.
This manual page was written for the Debian distribution
because the original program does not have a manual page.
Instead, it has documentation in the GNU Info format; see below.
.PP
.\" TeX users may be more comfortable with the \fB<whatever>\fP and
.\" \fI<whatever>\fP escape sequences to invode bold face and italics,
.\" respectively.
\fBdotgnu.rdf\fP is a program that...
.SH OPTIONS
These programs follow the usual GNU command line syntax, with long
options starting with two dashes (`-').
A summary of options is included below.
For a complete description, see the Info files.
.TP
.B \-h, \-\-help
Show summary of options.
.TP
.B \-v, \-\-version
Show version of program.
.SH SEE ALSO
.BR bar (1),
.BR baz (1).
.br
The programs are documented fully by
.IR "The Rise and Fall of a Fooish Bar" ,
available via the Info system.
.SH AUTHOR
This manual page was written by James Michael DuPont <address@hidden>,
for the Debian GNU/Linux system (but may be used by others).
--- NEW FILE ---
<!doctype refentry PUBLIC "-//OASIS//DTD DocBook V4.1//EN" [
<!-- Process this file with docbook-to-man to generate an nroff manual
page: `docbook-to-man manpage.sgml > manpage.1'. You may view
the manual page with: `docbook-to-man manpage.sgml | nroff -man |
less'. A typical entry in a Makefile or Makefile.am is:
manpage.1: manpage.sgml
docbook-to-man $< > $@
The docbook-to-man binary is found in the docbook-to-man package.
Please remember that if you create the nroff version in one of the
debian/rules file targets (such as build), you will need to include
docbook-to-man in your Build-Depends control field.
-->
<!-- Fill in your name for FIRSTNAME and SURNAME. -->
<!ENTITY dhfirstname "<firstname>FIRSTNAME</firstname>">
<!ENTITY dhsurname "<surname>SURNAME</surname>">
<!-- Please adjust the date whenever revising the manpage. -->
<!ENTITY dhdate "<date>February 8, 2003</date>">
<!-- SECTION should be 1-8, maybe w/ subsection other parameters are
allowed: see man(7), man(1). -->
<!ENTITY dhsection "<manvolnum>SECTION</manvolnum>">
<!ENTITY dhemail "<email>address@hidden</email>">
<!ENTITY dhusername "James Michael DuPont">
<!ENTITY dhucpackage "<refentrytitle>DOTGNU.RDF</refentrytitle>">
<!ENTITY dhpackage "dotgnu.rdf">
<!ENTITY debian "<productname>Debian</productname>">
<!ENTITY gnu "<acronym>GNU</acronym>">
<!ENTITY gpl "&gnu; <acronym>GPL</acronym>">
]>
<refentry>
<refentryinfo>
<address>
&dhemail;
</address>
<author>
&dhfirstname;
&dhsurname;
</author>
<copyright>
<year>2002</year>
<holder>&dhusername;</holder>
</copyright>
&dhdate;
</refentryinfo>
<refmeta>
&dhucpackage;
&dhsection;
</refmeta>
<refnamediv>
<refname>&dhpackage;</refname>
<refpurpose>program to do something</refpurpose>
</refnamediv>
<refsynopsisdiv>
<cmdsynopsis>
<command>&dhpackage;</command>
<arg><option>-e <replaceable>this</replaceable></option></arg>
<arg><option>--example <replaceable>that</replaceable></option></arg>
</cmdsynopsis>
</refsynopsisdiv>
<refsect1>
<title>DESCRIPTION</title>
<para>This manual page documents briefly the
<command>&dhpackage;</command> and <command>bar</command>
commands.</para>
<para>This manual page was written for the &debian; distribution
because the original program does not have a manual page.
Instead, it has documentation in the &gnu;
<application>Info</application> format; see below.</para>
<para><command>&dhpackage;</command> is a program that...</para>
</refsect1>
<refsect1>
<title>OPTIONS</title>
<para>These programs follow the usual &gnu; command line syntax,
with long options starting with two dashes (`-'). A summary of
options is included below. For a complete description, see the
<application>Info</application> files.</para>
<variablelist>
<varlistentry>
<term><option>-h</option>
<option>--help</option>
</term>
<listitem>
<para>Show summary of options.</para>
</listitem>
</varlistentry>
<varlistentry>
<term><option>-v</option>
<option>--version</option>
</term>
<listitem>
<para>Show version of program.</para>
</listitem>
</varlistentry>
</variablelist>
</refsect1>
<refsect1>
<title>SEE ALSO</title>
<para>bar (1), baz (1).</para>
<para>The programs are documented fully by <citetitle>The Rise and
Fall of a Fooish Bar</citetitle> available via the
<application>Info</application> system.</para>
</refsect1>
<refsect1>
<title>AUTHOR</title>
<para>This manual page was written by &dhusername; &dhemail; for
the &debian; system (but may be used by others). Permission is
granted to copy, distribute and/or modify this document under
the terms of the &gnu; Free Documentation
License, Version 1.1 or any later version published by the Free
Software Foundation; with no Invariant Sections, no Front-Cover
Texts and no Back-Cover Texts.</para>
</refsect1>
</refentry>
<!-- Keep this comment at the end of the file
Local variables:
mode: sgml
sgml-omittag:t
sgml-shorttag:t
sgml-minimize-attributes:nil
sgml-always-quote-attributes:t
sgml-indent-step:2
sgml-indent-data:t
sgml-parent-document:nil
sgml-default-dtd-file:nil
sgml-exposed-tags:nil
sgml-local-catalogs:nil
sgml-local-ecat-files:nil
End:
-->
--- NEW FILE ---
?package(dotgnu.rdf):needs=X11|text|vc|wm section=Apps/see-menu-manual\
title="dotgnu.rdf" command="/usr/bin/dotgnu.rdf"
--- NEW FILE ---
#! /bin/sh
# postinst script for dotgnu.rdf
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <postinst> `configure' <most-recently-configured-version>
# * <old-postinst> `abort-upgrade' <new version>
# * <conflictor's-postinst> `abort-remove' `in-favour' <package>
# <new-version>
# * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
# <failed-install-package> <version> `removing'
# <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
#
# quoting from the policy:
# Any necessary prompting should almost always be confined to the
# post-installation script, and should be protected with a conditional
# so that unnecessary prompting doesn't happen if a package's
# installation fails and the `postinst' is called with `abort-upgrade',
# `abort-remove' or `abort-deconfigure'.
case "$1" in
configure)
;;
abort-upgrade|abort-remove|abort-deconfigure)
;;
*)
echo "postinst called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
--- NEW FILE ---
#! /bin/sh
# postrm script for dotgnu.rdf
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <postrm> `remove'
# * <postrm> `purge'
# * <old-postrm> `upgrade' <new-version>
# * <new-postrm> `failed-upgrade' <old-version>
# * <new-postrm> `abort-install'
# * <new-postrm> `abort-install' <old-version>
# * <new-postrm> `abort-upgrade' <old-version>
# * <disappearer's-postrm> `disappear' <r>overwrit>r> <new-version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
purge|remove|upgrade|failed-upgrade|abort-install|abort-upgrade|disappear)
;;
*)
echo "postrm called with unknown argument \`$1'" >&2
exit 1
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
--- NEW FILE ---
#! /bin/sh
# preinst script for dotgnu.rdf
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <new-preinst> `install'
# * <new-preinst> `install' <old-version>
# * <new-preinst> `upgrade' <old-version>
# * <old-preinst> `abort-upgrade' <new-version>
#
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
install|upgrade)
# if [ "$1" = "upgrade" ]
# then
# start-stop-daemon --stop --quiet --oknodo \
# --pidfile /var/run/dotgnu.rdf.pid \
# --exec /usr/sbin/dotgnu.rdf 2>/dev/null || true
# fi
;;
abort-upgrade)
;;
*)
echo "preinst called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
--- NEW FILE ---
#! /bin/sh
# prerm script for dotgnu.rdf
#
# see: dh_installdeb(1)
set -e
# summary of how this script can be called:
# * <prerm> `remove'
# * <old-prerm> `upgrade' <new-version>
# * <new-prerm> `failed-upgrade' <old-version>
# * <conflictor's-prerm> `remove' `in-favour' <package> <new-version>
# * <deconfigured's-prerm> `deconfigure' `in-favour'
# <package-being-installed> <version> `removing'
# <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
case "$1" in
remove|upgrade|deconfigure)
# install-info --quiet --remove /usr/info/dotgnu.rdf.info.gz
;;
failed-upgrade)
;;
*)
echo "prerm called with unknown argument \`$1'" >&2
exit 1
;;
esac
# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.
#DEBHELPER#
exit 0
--- NEW FILE ---
#!/usr/bin/make -f
# Sample debian/rules that uses debhelper.
# GNU copyright 1997 to 1999 by Joey Hess.
# Uncomment this to turn on verbose mode.
#export DH_VERBOSE=1
# This is the debhelper compatibility version to use.
export DH_COMPAT=4
CFLAGS = -Wall -g
ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
CFLAGS += -O0
else
CFLAGS += -O2
endif
ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
INSTALL_PROGRAM += -s
endif
# shared library versions, option 1
version=2.0.5
major=2
# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so
#version=`ls src/.libs/lib*.so.* | \
# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'`
#major=`ls src/.libs/lib*.so.* | \
# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'`
configure: configure-stamp
configure-stamp:
dh_testdir
# Add here commands to configure the package.
touch configure-stamp
build: build-stamp
build-stamp: configure-stamp
dh_testdir
# Add here commands to compile the package.
$(MAKE)
touch build-stamp
clean:
dh_testdir
dh_testroot
rm -f build-stamp configure-stamp
# Add here commands to clean up after the build process.
-$(MAKE) clean
dh_clean
install: build
dh_testdir
dh_testroot
dh_clean -k
dh_installdirs
# Add here commands to install the package into debian/tmp
$(MAKE) install DESTDIR=$(CURDIR)/debian/tmp
# Build architecture-independent files here.
binary-indep: build install
# We have nothing to do by default.
# Build architecture-dependent files here.
binary-arch: build install
dh_testdir
dh_testroot
dh_movefiles
# dh_installdebconf
# dh_installdocs
# dh_installexamples
# dh_installmenu
# dh_installlogrotate
# dh_installemacsen
# dh_installpam
# dh_installmime
# dh_installinit
# dh_installcron
# dh_installman
# dh_installinfo
# dh_undocumented
# dh_installchangelogs ChangeLog
# dh_link
# dh_strip
dh_compress
dh_fixperms
dh_makeshlibs
dh_installdeb
# dh_perl
dh_shlibdeps
dh_gencontrol
dh_md5sums
dh_builddeb
binary: binary-indep binary-arch
.PHONY: build clean binary-indep binary-arch binary install configure
--- NEW FILE ---
libdotgnu.rdf 0.2 dotgnu.rdf (>> 0.2-0), dotgnu.rdf (<< 0.2-99)
--- NEW FILE ---
# Example watch control file for uscan
# Rename this file to "watch" and then you can run the "uscan" command
# to check for upstream updates and more.
# Site Directory Pattern Version Script
version=2
sunsite.unc.edu /pub/Linux/Incoming dotgnu.rdf-(.*)\.tar\.gz debian
uupdate
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Dotgnu-libs-commits] CVS: dotgnu.rdf/debian README.Debian,NONE,1.1 changelog,NONE,1.1 conffiles.ex,NONE,1.1 control,NONE,1.1 copyright,NONE,1.1 cron.d.ex,NONE,1.1 dirs,NONE,1.1 docs,NONE,1.1 dotgnu.rdf-dev.dirs,NONE,1.1 dotgnu.rdf-dev.files,NONE,1.1 dotgnu.rdf1.dirs,NONE,1.1 dotgnu.rdf1.files,NONE,1.1 emacsen-install.ex,NONE,1.1 emacsen-remove.ex,NONE,1.1 emacsen-startup.ex,NONE,1.1 ex.package.doc-base,NONE,1.1 files,NONE,1.1 init.d.ex,NONE,1.1 manpage.1.ex,NONE,1.1 manpage.sgml.ex,NONE,1.1 menu.ex,NONE,1.1 postinst.ex,NONE,1.1 postrm.ex,NONE,1.1 preinst.ex,NONE,1.1 prerm.ex,NONE,1.1 rules,NONE,1.1 shlibs.local.ex,NONE,1.1 watch.ex,NONE,1.1,
James Michael DuPont <address@hidden> <=
- Prev by Date:
[Dotgnu-libs-commits] CVS: dotgnu.rdf/debian/dotgnu.rdf - New directory
- Next by Date:
[Dotgnu-libs-commits] CVS: dotgnu.rdf Stack.cs,NONE,1.1 ChangeLog,1.12,1.13 DotGNU.Rdf.build,1.8,1.9
- Previous by thread:
[Dotgnu-libs-commits] CVS: dotgnu.rdf/debian/dotgnu.rdf - New directory
- Next by thread:
[Dotgnu-libs-commits] CVS: dotgnu.rdf Stack.cs,NONE,1.1 ChangeLog,1.12,1.13 DotGNU.Rdf.build,1.8,1.9
- Index(es):