[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [dmidecode] Memory voltage values
From: |
Erwan Velu |
Subject: |
Re: [dmidecode] Memory voltage values |
Date: |
Wed, 24 Apr 2013 15:51:08 +0200 |
Epic fail on my side... That exactly do the job.
Thanks !
2013/4/24 Jean Delvare <address@hidden>
> Salut Erwan,
>
> On Wed, 24 Apr 2013 15:11:10 +0200, Erwan Velu wrote:
> > I do see many devices using 1.xy voltage like 1.35, 1.55, 1.65 etc...
> > So we could easily image that something thinks the device runs at 1.5
> while
> > it's 1.55.
> >
> > I do agree 3 digits is too much, 1 is maybe not enough.
> >
> > SMBIOS 2.8 doesn't provide any min/max for this minivolt value, so we can
> > expect having 2 sub digits easily.
>
> I completely agree. My proposal isn't to change from 3 to 1 digit. It
> changes from "always 3" to "at least 1 but no more than necessary."
> 1500 would be displayed as "1.5 V" and 1350 as "1.35 V". I.e. exactly
> what you want, if I understand correctly.
>
> --
> Jean Delvare
>