On Jan 26, 2024, at 14:22, Marcus D. Leech <patchvonbraun@gmail.com> wrote:
On 26/01/2024 17:07, Daniel Estévez wrote:
Hi Yotam,
As far as I know, the B200 doesn't support RFNOC. From
https://www.ettus.com/sdr-software/rfnoc/
"all USRP devices from the third-generation on (X300 Series, E300 Series) are
supported by RFNoC out-of-the-box".
Best,
Daniel.
This is the case, yes. The FPGAs in the B2xx series aren't compatible with the
RFNOC toolchain for one, and aren't really
big enough to support the RFNOC framework inside the FPGA.
On 26/01/2024 21:04, יותם זיס wrote:
Hi everyone, I'm currently working on a bpsk modem for S-band communication
with the Tevel and TAUSAT satellites. I recently started reading about RFNoc
and it intrigued me for use in my project since I own a USRP B200. Would love
some advice on whether or not to try this out and if so how to implement it
correctly, thanks.
Attached - a picture of my flowgraph, currently the uplink is connected
directly to the downlink but usually i use a lime mini for transmission.