Hello
I've been working in my master thesis whose objective is to achive phase coherence using the N310.
When trying to use a full duplex design on GNURADIO as follows :
I'm getting the following error:
I've loaded the XG image and running the benchmark test using this command :
/usr/local/lib/uhd/examples/benchmark_rate --args "type=n3xx,mgmt_addr=192.168.1.104,addr=192.168.10.2,second_addr=192.168.20.2,master_clock_rate=125e6" --duration
60 --channels "0,1,2,3" --rx_rate 62.5e6 --rx_subdev "A:0 A:1 B:0 B:1" --tx_rate 62.5e6 --tx_subdev "A:0 A:1 B:0 B:1"
All the frontend lights turn on and it gives me the following output:
From this I reach the conclusion that the machine is configured in a correct manner.
I figure that I might be doing something wrong in my gnu-rado desgin.Attached as annex.
Any hint you can give me?
Thanks in advance 🙂
Best Regards,
Duarte Ferreira Dias
Universidade de Aveiro / Instituto de Telecomunicações Aveiro
PS: the center freq is 0 and gain is 0 on the frontends, but i consider that this is not relevant to the test of full duplex work in terms of hardware communication