Re: R: Funcube Dongle Pro Plus help

[Marcus Müller]

Hi Vincenzo,

no such thing as "closed" :)

Well, that path is where your GNU Radio is installed to. You should be 
able to check it through `gnuradio-config-info --prefix`.

To repeat my questions:

1. Did `cmake...` run through successfully? Or did it end with an error?

2. Did `make` run through successfully? Or did it end with an error?

3. Did `sudo make install` run through successfully? Or did it end with 
an error?

Best regards,
Marcus

On 8/31/20 7:25 PM, Vincenzo Mone wrote:
> Sorry Marcus,
> I thought it was closed as I did not get any reply from a long time.
> Please what I need to check as I still did not understood  how to know The
> gnuradio path for the correct command:
>
> cmake -DCMAKE_INSTALL_PREFIX= "path to gnuradio installation" ../
>
> Thanks
>
> 73's de Enzo IK8OZV
> EasyLog 5 BetaTester
> EasyLog PDA BetaTester
> WinBollet BetaTester
> D.C.I. CheckPoint Regione Campania
> Skype: ik8ozv8520
>
>
>
>
>        *********************************
>        ******   GSM  +39 328 7110193  ******
>        *****     SMS  +39 328 7110193    *****
>        *********************************
>
> > -----Messaggio originale-----
> > Da: Marcus Müller <mueller@kit.edu>
> > Inviato: lunedì 31 agosto 2020 18:11
> > A: Vincenzo Mone <vimone@alice.it>; Gnuradio Mailing List <discuss-
> > gnuradio@gnu.org>
> > Oggetto: Re: Funcube Dongle Pro Plus help
> >
> > Vincenzo,
> >
> > please don't open a new thread for every other email you have sent. You
> > have gotten easily confused in the past, and we can avoid that if you can
> try
> > to focus on staying on a single email thread, and it was a big problem for
> you.
> > Please don't open a new thread before having solved this issue, and
> instead
> > reply to the things here, keeping discuss-gnuradio@gnu.org in CC:.
> >
> > Something went wrong during your software build or installation. We can't
> > tell you what that was - have you checked whether the cmake, the make,
> > the make install commands were successful?
> >
> > Best regards,
> >
> > Marcus
> >
> > On 8/31/20 5:09 PM, Vincenzo Mone wrote:
> > > Hello
> > >
> > > Please I am trying to install the FCDPROPLUS which is the Funcube
> > > Dongle Pro Plus.
> > >
> > > This is what I've done following the instructions on the author page:
> > >
> > > git clone https://github.com/dl1ksv/gr-fcdproplus
> > >
> > > cd ~/gr-fcdproplus
> > >
> > > mkdir build
> > >
> > > cd build
> > >
> > > cmake -DCMAKE_INSTALL_PREFIX="/usr" -DCMAKE_BUILD_TYPE=Release
> > ../
> > > make
> > >
> > > sudo make install
> > >
> > > sudo ldconfig
> > >
> > > then I have created a file named '99-usb-serial.rules'  with the
> > > following content:
> > >
> > > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> > ATTRS{idProduct}=="fb56"
> > > MODE:="0666"
> > >
> > > SUBSYSTEMS=="usb" ATTRS{idVendor}=="04d8"
> > ATTRS{idProduct}=="fb31"
> > > MODE:="0666"
> > >
> > > KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> > > ATTRS{idProduct}=="fb56", MODE="0666"
> > >
> > > KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8",
> > > ATTRS{idProduct}=="fb
> > >
> > > Then:
> > >
> > > cd /etc/udev/rules.d
> > >
> > > sudo cp -v ~/<your folder>/99-usb-serial.rules ./
> > >
> > > sudo udevadm trigger
> > >
> > > After that executing grc  I sould find in Fcd
> > >
> > > Funcube Dongle
> > >
> > > Funcube Dongle control
> > >
> > > Funcube Dongle Pro+
> > >
> > > Funcube Dongle Pro+ control
> > >
> > > But I do not find any FCD group.
> > >
> > > Please anybody can tell me if I am doing something wrong?
> > >
> > > Thanks
> > >
> > > 73's de Enzo IK8OZV
> > > EasyLog 5 BetaTester
> > > EasyLog PDA BetaTester
> > > WinBollet BetaTester
> > > D.C.I. CheckPoint Regione Campania
> > > Skype: ik8ozv8520
> > >
> > >
> > >
> > >
> > > *********************************
> > >
> > > ****** GSM  +39 328 7110193  ******
> > >
> > >        *****     SMS  +39 328 7110193 *****
> > >
> > >        *********************************