I have uploaded http://jmfriedt.org/sdcard.img
my Buildroot image generated for RPi4 that I have been
using daily for the last 2 months, so pretty sure it is
working. Actually it is 1.1 GB because of lapack needed
for gnss-sdr but GNU Radio 3.8/Python3 will only require
about 500 MB.
Gwenhael Goavec-Merou ported all GNU Radio related software/libraries
to Buildroot: the missing parts for gnss-sdr are found at
https://github.com/oscimp/PlutoSDR in the for_next branch.
root passwd=root, no user account, USRP FPGA images to be added
in usr/share/uhd/images manually if libuhd is needed. Tested with
RTL-SDR DVB-T dongle, PlutoSDR (gr-iio) and B210.
JM
--
JM Friedt, FEMTO-ST Time & Frequency/SENSeOR, 26 rue de l'Epitaphe,
25000 Besancon, France
May 24, 2020 9:51 PM, "Glen I Langston" <address@hidden> wrote:
Hello
I’ve been a great proponent of gnuradio, but I’m finding in
increasing difficult to do anything new, as installation of 3.8 is
essentially impossible for most people.
I’ve written and built my own python modules and C++ blocks.
However, despite months of trying now, I can not get 3.8 to install
on a raspberry pi.
Has anyone achieved 3.8 on a raspberry pi?
If so can you please save the entire OS, gzip compressed and put it
online somewhere. It will probably be about 3 GB compressed.
Thanks
Glen
Note that there are many many (too many) different guides on line
1) apt-get
2) pybombs
3) git clone then build
each one fails in a different way.