Hydra job gnu:hurd-master:qemu_tests.build on x86_64-linux, build 2419118: Failed with non-zero exit code

[Hydra Build Daemon]

Hi,

This is to let you know that Hydra build 2419118 of job 
gnu:hurd-master:qemu_tests.build has changed from 'Dependency failed' to 
'Failed with non-zero exit code'.

Complete build information can be found on this page: 
http://hydra.nixos.org/build/2419118

The last 50 lines of the build log are shown at the bottom of this email.

A summary of the build information follows:

Build ID:              | 2419118
Nix name:              | hurd-qemu-test-build
Short description:     | The GNU Hurd, GNU project's replacement for the Unix 
kernel
Maintainer(s):         | Hurd <address@hidden>, Ludovic Courtès 
<address@hidden>
System:                | x86_64-linux
Derivation store path: | 
/nix/store/smhrnv2j1sdwh58m1rhk7wjznl2j94fg-hurd-qemu-test-build.drv
Output store path:     | 
/nix/store/5v0068116gsq3mzy6i9n4ridrcc4bnn4-hurd-qemu-test-build
Time added:            | 2012-04-18 22:36:19
Build started:         | 2012-04-18 21:18:28
Build finished:        | 2012-04-18 22:36:19
Duration:              | 4671s

The build inputs were:

Name             | Type  | Value
-----------------+-------+--------------------------------------------------------------------------------------
xbuild           | build | 2418993
partedTarball    | build | 2417912
hydraConfig      | git   | 
git://git.savannah.gnu.org/hydra-recipes.git:592c866b0cfefa207e71421e86c2a82f857c01da
inetutils        | build | 2418916
coreutils        | build | 2418904
glibcTarball     | build | 2156915
parted           | build | 1107421
nixpkgs          | svn   | https://nixos.org/repos/nix/nixpkgs/trunk:33835
tarball          | build | 2381003
guile            | build | 2418909
grep             | build | 2419044
hurdSrc          | git   | 
git://git.sv.gnu.org/hurd/hurd.git:69bd9b1d600debf7b758cc7f8353b747430259b4
coreutilsTarball | build | 2417897
machTarball      | build | 2374219
mach             | build | 2419045

Regards,

The Hydra build daemon.

---
ppa: Probing port 0278
scsi : 0 hosts.
scsi : detected total.
rtl8139.c:v1.23a 8/24/2003 Donald Becker, address@hidden
 http://www.scyld.com/network/rtl8139.html
  The PCI BIOS has not enabled the device at 0/24!  Updating PCI command    3-> 
  7.
eth0: RealTek RTL8139C+, 64 bit high performance at 0xc100, IRQ 11, 52:54: 
0:12:34:56.
  PCI latency timer (CFLT) is unreasonably low at 0.  Setting to 32 clocks.
via-rhine.c:v1.16 7/22/2003  Written by Donald Becker <address@hidden>
  http://www.scyld.com/network/via-rhine.html
0 3c515 cards found.
eth1: D-Link DE-600 pocket adapter: not at I/O 0x378.
D-Link DE-620 pocket adapter not identified in the printer port
Partition check (DOS partitions):
 hd0: hd0s1
Linux PCMCIA Card Services 3.2.8
  kernel build: 2.0.36 
  options:  [pci]
PCI routing table version 1.0 at 0xfd2a0
Intel ISA/PCI/CardBus PCIC probe:
  no bridges found.
ds: no socket drivers loaded!


xirc2ps_cs.c 1.31 1998/12/09 19:32:55 (dd9jn+kvh)
lpr0: at atbus0, port = 378, spl = 6, pic = 7.
module 0: ext2fs --multiboot-command-line=${kernel-command-line} 
--host-priv-port=${host-port} --device-master-port=${device-port} 
--exec-server-task=${exec-task} -T typed ${root} $(task-create) $(task-resume) 
module 1: exec /hurd/exec $(exec-task=task-create)                              
                                                                                
                                                  2 multiboot modules           
                                                                                
                                                                                
                              task loaded: ext2fs 
--multiboot-command-line=root=device:hd0s1 console=com0 --host-priv-port=1 
--device-master-port=2 --exec-server-task=3 -T typed device:hd0s1
task loaded: exec /hurd/exec

start ext2fs: Hurd server bootstrap: ext2fs[device:hd0s1] exec init proc 
auth/libexec/console-run: /dev/console: No such file or directory
swapon: error while loading shared libraries: libparted.so.2: cannot open 
shared object file: No such file or directory
Automatic boot in progress...
Wed Apr 18 20:36:09 UTC 2012
cleaning up left over files...done
touch: cannot touch `/var/run/mtab': No such file or directory
starting daemons:/libexec/rc: line 109: /sbin/syslogd: No such file or directory
/libexec/rc: line 110: /sbin/inetd: No such file or directory
.
Wed Apr 18 20:36:09 UTC 2012
+ uname -a
GNU nixognu 0.3 GNU-Mach 1.3.99/Hurd-0.3 i686-AT386 GNU
+ ls -la /host/xchg
ls: cannot access /host/xchg: Translator died
+ '[' -f /host/xchg/cmd ']'
+ reboot
init: notifying ext2fs device:hd0s1 of shutdown...init: rebooting Mach (flags 
0)...
Virtual machine didn't produce an exit code.
builder for 
`/nix/store/smhrnv2j1sdwh58m1rhk7wjznl2j94fg-hurd-qemu-test-build.drv' failed 
with exit code 1
error (ignored): cannot unlink 
`/nix/store/smhrnv2j1sdwh58m1rhk7wjznl2j94fg-hurd-qemu-test-build.drv.chroot/tmp/nix-build-smhrnv2j1sdwh58m1rhk7wjznl2j94fg-hurd-qemu-test-build.drv-0':
 Device or resource busy
error: build of 
`/nix/store/smhrnv2j1sdwh58m1rhk7wjznl2j94fg-hurd-qemu-test-build.drv' failed