[Commit-gnuradio] r10635 - usrp-hw/trunk/sym/generated

[jblum]

Author: jblum
Date: 2009-03-18 18:16:25 -0600 (Wed, 18 Mar 2009)
New Revision: 10635

Added:
   usrp-hw/trunk/sym/generated/ft232rq.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
added ft232rq source

Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2009-03-18 20:00:41 UTC (rev 
10634)
+++ usrp-hw/trunk/sym/generated/Makefile        2009-03-19 00:16:25 UTC (rev 
10635)
@@ -248,7 +248,8 @@
        sky73202-SIG.sym \
        sky73202-CTRL.sym \
        sn74aup1t57.sym \
-       lt55x4.sym
+       lt55x4.sym \
+       ft232rq.sym
 
 
 

Added: usrp-hw/trunk/sym/generated/ft232rq.src
===================================================================
--- usrp-hw/trunk/sym/generated/ft232rq.src                             (rev 0)
+++ usrp-hw/trunk/sym/generated/ft232rq.src     2009-03-19 00:16:25 UTC (rev 
10635)
@@ -0,0 +1,82 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=3200
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=XXXX
+name=FT322RQ
+device=FT232RQ
+refdes=U?
+footprint=SSOP
+description=USB USART
+documentation=http://www.ftdichip.com/Products/FT232R.htm
+author=jblum
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              pwr     line    l               VCCIO
+19             pwr     line    l               VCC
+15             io      line    l               USBDM
+14             io      line    l               USBDP
+5              io      line    l               NC
+12             io      line    l               NC
+13             io      line    l               NC
+25             io      line    l               NC
+29             io      line    l               NC
+18             in      line    l               \_RESET\_
+23             io      line    l               NC
+27             in      line    l               OSCI
+28             out     line    l               OSCO
+16             out     line    l               3VOUT
+24             pwr     line    b               AGND
+4              pwr     line    b               GND
+17             pwr     line    b               GND
+20             pwr     line    b               GND
+26             in      line    b               TEST
+30             out     line    r               TXD
+2              in      line    r               RXD
+32             out     line    r               \_RTS\_
+8              in      line    r               \_CTS\_
+31             out     line    r               \_DTR\_
+6              in      line    r               \_DSR\_
+7              in      line    r               \_DCD\_
+3              in      line    r               \_R\_
+22             io      line    r               CUSB0
+21             io      line    r               CUSB1
+10             io      line    r               CUSB2
+11             io      line    r               CUSB3
+9              io      line    r               CUSB4