[Commit-gnuradio] r6535 - gnuradio/branches/developers/matt/u2f/firmware

[eb]

Author: eb
Date: 2007-09-25 14:06:46 -0600 (Tue, 25 Sep 2007)
New Revision: 6535

Added:
   gnuradio/branches/developers/matt/u2f/firmware/eth_phy.h
Log:
register defs for ethernet phy chip

Added: gnuradio/branches/developers/matt/u2f/firmware/eth_phy.h
===================================================================
--- gnuradio/branches/developers/matt/u2f/firmware/eth_phy.h                    
        (rev 0)
+++ gnuradio/branches/developers/matt/u2f/firmware/eth_phy.h    2007-09-25 
20:06:46 UTC (rev 6535)
@@ -0,0 +1,222 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2007 Free Software Foundation, Inc.
+ * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+/* Much of this was extracted from the Linux e1000_hw.h file */
+
+#ifndef INCLUDED_ETH_PHY_H
+#define INCLUDED_ETH_PHY_H
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+
+#define PHY_CTRL         0x00 /* Control Register */
+#define PHY_STATUS       0x01 /* Status Regiser */
+#define PHY_ID1          0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2          0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV  0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY   0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP  0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL   0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS   0x0F /* Extended Status Reg */
+
+/* PHY 1000 MII Register additions in DP83856 */
+/* The part implements 0x00 thru 0x1f; we use these. */
+
+#define        PHY_LINK_AN      0x11 /* Link and Auto Negotiation Status Reg */
+#define PHY_INT_STATUS  0x14 /* Interupt Status Reg */
+#define PHY_INT_MASK    0x15 /* Interrupt Mask Reg */
+#define PHY_INT_CLEAR    0x16 /* Interrupt Clear Reg */
+
+
+/* Bit definitions for some of the registers above */
+
+/* PHY Control Register (PHY_CTRL) */
+#define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
+#define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
+#define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN       0x0800  /* Power down */
+#define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register (PHY_STATUS) */
+#define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
+#define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */
+#define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
+#define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
+#define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */
+#define NWAY_ER_LP_NWAY_CAPS      0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD          0x0002 /* LP is 10T   Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS    0x0004 /* LP is 10T   Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT  0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register (PHY_NEXT_PAGE_TX) */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE         0x0800 /* Toggles between exchanges
+                                    * of different NP
+                                    */
+#define NPTX_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
+                                    * 0 = cannot comply with msg
+                                    */
+#define NPTX_MSG_PAGE       0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE      0x8000 /* 1 = addition NP will follow
+                                    * 0 = sending last NP
+                                    */
+
+/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE         0x0800 /* Toggles between exchanges
+                                       * of different NP
+                                       */
+#define LP_RNPR_ACKNOWLDGE2    0x1000 /* 1 = will comply with msg
+                                       * 0 = cannot comply with msg
+                                       */
+#define LP_RNPR_MSG_PAGE       0x2000  /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE     0x4000  /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE      0x8000  /* 1 = addition NP will follow
+                                        * 0 = sending last NP
+                                        */
+
+/* 1000BASE-T Control Register (PHY_1000T_CTRL) */
+#define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
+#define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
+                                        /* 0=DTE device */
+#define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
+                                        /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value 
*/
+                                        /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register (PHY_1000T_STATUS) */
+#define SR_1000T_IDLE_ERROR_CNT   0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR   0x0100 /* LP asymmetric pause direction bit 
*/
+#define SR_1000T_LP_HD_CAPS       0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS       0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS  0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES    0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT  0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT          12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT           13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
+
+/* Extended Status Register (PHY_EXT_STATUS) */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK   0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0      /* register 10h bit 8 (normal polarity) 
*/
+
+#define AUTO_POLARITY_DISABLE  0x0010 /* register 11h bit 4 */
+                                      /* (0=enable, 1=disable) */
+
+/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */
+#define        LANSR_MASTER           0x0001 /* 1=PHY is currently in master 
mode */
+#define        LANSR_FULL_DUPLEX      0x0002 /* 1=PHY is currently full duplex 
*/
+#define LANSR_LINK_GOOD        0x0004 /* 1=a good link is established */
+#define LANSR_SPEED_MASK       0x0018
+#define          LANSR_SPEED_10       0x0000 /*   10Mb/s */
+#define          LANSR_SPEED_100      0x0008 /*  100Mb/s */
+#define          LANSR_SPEED_1000     0x0010 /* 1000Mb/s */
+#define          LANSR_SPEED_RSRVD    0x0018 /* reserved */
+#define LANSR_NON_COMP_MODE    0x0020 /* 1=detects only in non-compliant mode 
*/
+#define        LANSR_DEEP_LOOPBACK    0x0040 /* 1=the PHY operates in deep 
loopback mode */
+#define        LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow 
loopback mode */
+#define LANSR_RSRVD_8         0x0100 /* reserved */
+#define LANSR_FIFO_ERR        0x0200 /* 1=FIFO error occurred */
+#define        LANSR_MDIX_XOVER       0x0400 /* 1=PHY's MDI is in cross-over 
mode */
+#define        LANSR_RSRVD_11         0x0800 /* resevered */
+#define        LANSR_TP_POLARITY_REV  0xf000 /* Twisted pair polarity status 
A:D([15:12]) 1=reversed */
+
+/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */
+#define        PHY_INT_RSRVD_0        0x0001 /* reserved */
+#define        PHY_INT_RSRVD_1        0x0002 /* reserved */
+#define        PHY_INT_RSRVD_2        0x0004 /* reserved */
+#define        PHY_INT_REM_FLT_CNG    0x0008 /* Remote Fault Changed */
+#define        PHY_INT_AN_CMPL        0x0010 /* Auto-negotiation completion */
+#define        PHY_INT_NXT_PG_RCVD    0x0020 /* Next Page Received */
+#define PHY_INT_JABBER_CNG     0x0040 /* Jabber Changed */
+#define PHY_INT_NO_LINK               0x0080 /* No link after auto-negotiation 
*/
+#define PHY_INT_NO_HCD        0x0100 /* AN couldn't determine highest common 
denominator */
+#define PHY_INT_MAS_SLA_ERR    0x0200 /* Master / Slave Error: couldn't 
resolve */
+#define PHY_INT_PRL_DET_FLT    0x0400 /* Parallel detection fault */
+#define PHY_INT_POL_CNG               0x0800 /* Polarity of any channel 
changed */
+#define        PHY_INT_MDIX_CNG       0x1000 /* MDIX changed.  A pair swap 
occurred. */
+#define PHY_INT_DPLX_CNG       0x2000 /* Duplex changed */
+#define PHY_INT_LNK_CNG               0x4000 /* Link changed (asserted when a 
link is established or broken) */
+#define PHY_INT_SPD_CNG               0x8000 /* Speed changed */
+
+#endif /* INCLUDED_ETH_PHY_H */


Property changes on: gnuradio/branches/developers/matt/u2f/firmware/eth_phy.h
___________________________________________________________________
Name: svn:eol-style
   + native