[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r4350 - usrp-hw/trunk/sym/generated
From: |
matt |
Subject: |
[Commit-gnuradio] r4350 - usrp-hw/trunk/sym/generated |
Date: |
Wed, 31 Jan 2007 18:53:22 -0700 (MST) |
Author: matt
Date: 2007-01-31 18:53:22 -0700 (Wed, 31 Jan 2007)
New Revision: 4350
Added:
usrp-hw/trunk/sym/generated/adl5385-MIX.src
usrp-hw/trunk/sym/generated/adl5385-PWR.src
usrp-hw/trunk/sym/generated/lt1613.src
usrp-hw/trunk/sym/generated/nb6l239-CLK.src
usrp-hw/trunk/sym/generated/nb6l239-CTRL.src
usrp-hw/trunk/sym/generated/nb6l239-PWR.src
Modified:
usrp-hw/trunk/sym/generated/Makefile
Log:
new parts
Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile 2007-01-31 23:13:57 UTC (rev
4349)
+++ usrp-hw/trunk/sym/generated/Makefile 2007-02-01 01:53:22 UTC (rev
4350)
@@ -158,7 +158,13 @@
cy7c1356cv25-bz-PWR.sym \
cy7c1356cv25-bz-CTRL.sym \
cy7c1356cv25-bz-RAM.sym \
- ipass-sas-x4.sym
+ ipass-sas-x4.sym \
+ adl5385-PWR.sym \
+ adl5385-MIX.sym \
+ nb6l239-PWR.sym \
+ nb6l239-CLK.sym \
+ nb6l239-CTRL.sym \
+ lt1613.sym
all : $(SOURCES)
Added: usrp-hw/trunk/sym/generated/adl5385-MIX.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5385-MIX.src (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5385-MIX.src 2007-02-01 01:53:22 UTC (rev
4350)
@@ -0,0 +1,57 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5385-MIX
+device=ADL5385
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+13 in line l IBBP
+14 in dot l \_IBBN\_
+18 in line l QBBP
+17 in dot l \_QBBN\_
+7 out line r VOUT
+21 in line l LOIP
+22 in dot l \_LOIN\_
Added: usrp-hw/trunk/sym/generated/adl5385-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5385-PWR.src (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5385-PWR.src 2007-02-01 01:53:22 UTC (rev
4350)
@@ -0,0 +1,72 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5385-PWR
+device=ADL5385
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+4 pwr line r COM1
+5 pwr line r COM1
+6 pwr line r COM1
+15 pwr line r COM2
+16 pwr line r COM2
+19 pwr line r COM3
+20 pwr line r COM3
+
+1 pas line b NC/GND
+2 pas line b NC/GND
+3 pas line b NC/GND
+
+8 pwr line l VPS1
+9 pwr line l VPS1
+11 pwr line l VPS2
+23 pwr line l VPS3
+24 pwr line l VPS3
+
+
+12 in line l ENBL
+
+10 out line b TEMP
Added: usrp-hw/trunk/sym/generated/lt1613.src
===================================================================
--- usrp-hw/trunk/sym/generated/lt1613.src (rev 0)
+++ usrp-hw/trunk/sym/generated/lt1613.src 2007-02-01 01:53:22 UTC (rev
4350)
@@ -0,0 +1,55 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=LT1613CS5
+device=LT1613CS5
+refdes=U?
+footprint=SOT23-5
+description=Linear Tech Adj. Buck Regulator
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+1 pwr line r SW
+2 pwr line b GND
+3 in line r FB
+5 pwr line l Vin
+4 in dot l \_SHDN\_
Added: usrp-hw/trunk/sym/generated/nb6l239-CLK.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-CLK.src (rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-CLK.src 2007-02-01 01:53:22 UTC (rev
4350)
@@ -0,0 +1,59 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-CLK
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 1 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+1 in line l VT
+2 in clk l CLK
+3 in dotclk l \_CLK\_
+4 out line l Vbbac
+12 out line r QA
+11 out dot r \_QA\_
+10 out line r QB
+9 out dot r \_QB\_
+
Added: usrp-hw/trunk/sym/generated/nb6l239-CTRL.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-CTRL.src
(rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-CTRL.src 2007-02-01 01:53:22 UTC
(rev 4350)
@@ -0,0 +1,56 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-CTRL
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 3 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+15 in line l SELA0
+14 in line l SELA1
+6 in line l SELB0
+7 in line l SELB1
+5 in dot r \_EN\_
+16 in dot r \_MR\_
Added: usrp-hw/trunk/sym/generated/nb6l239-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/nb6l239-PWR.src (rev 0)
+++ usrp-hw/trunk/sym/generated/nb6l239-PWR.src 2007-02-01 01:53:22 UTC (rev
4350)
@@ -0,0 +1,53 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=NB6L239-PWR
+device=NB6L239
+refdes=U?
+footprint=QFN16EP
+description=On Semi Clock Divider
+documentation=http://www.onsemi.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=Part 2 of 3
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+13 pwr line l Vcc
+8 pwr line r Vee
+17 pwr line r GND_EP
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r4350 - usrp-hw/trunk/sym/generated,
matt <=