bug-xorriso
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Bug-xorriso] Drives on PATA-USB Bridge


From: sean loony
Subject: [Bug-xorriso] Drives on PATA-USB Bridge
Date: Sat, 01 Aug 2015 19:50:22 +0200
User-agent: Mozilla/5.0 (X11; Linux i686; rv:31.0) Gecko/20100101 Thunderbird/31.8.0

Hello,

got some drives on an PATA-USB2 Adaptor (JMicron-Chip)

When I do this:
xorriso -dev /dev/sr2 -list_formats
or
xorriso -dev /dev/sr2 -blank as_needed

I got this:
xorriso 1.3.2 : RockRidge filesystem manipulator, libburnia project.
<hangs some seconds here>

libburn : FAILURE : SCSI command ACh yielded host problem: 0x5 SG_ERR_DID_ABORT (Told to abort) libburn : FAILURE : SCSI command ACh yielded host problem: 0x5 SG_ERR_DID_ABORT (Told to abort) libburn : FAILURE : SCSI command 5Ah yielded host problem: 0x7 SG_ERR_DID_ERROR (Internal error detected in the host adapter)
libburn : FATAL : Lost connection to drive
xorriso : FAILURE : Cannot aquire drive '/dev/sr2'
xorriso : aborting : -abort_on 'FAILURE' encountered 'FATAL'

After this the drive disapears from the bus (on lsscsi it disappears)
after a few seconds it is again recognized in the system sometimes
false als "disk" not as "cd/dvd". After maually reconect from usb-cable
it is recognized correctly.

The above commands work perfect on internal SATA drives.







reply via email to

[Prev in Thread] Current Thread [Next in Thread]