[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: dialog --pause not timing out on serial console (dialog 1.2)
|
From: |
Paul Fertser |
|
Subject: |
Re: dialog --pause not timing out on serial console (dialog 1.2) |
|
Date: |
Thu, 22 Jul 2021 13:29:10 +0300 |
|
User-agent: |
Mutt/1.10.1 (2018-07-13) |
Hi,
On Fri, Jul 16, 2021 at 01:16:52PM +0300, Stefan Puiu wrote:
> > What you'll probably need is 'terminator' to wrap DTR to DCD to make
> > the driver think a terminal is attached when there is none.
>
> I probably need to read a bit on serial ports and consoles. Not sure
> what you mean by 'terminator' here.
My guess is that something like an "RS-232 loopback plug" is meant
here. So that when terminal is not attached one would instead insert a
dummy connector with a wire shorting DTR and DCD lines.
--
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav@gmail.com
- Re: dialog --pause not timing out on serial console (dialog 1.2), Stefan Puiu, 2021/07/14
- Re: dialog --pause not timing out on serial console (dialog 1.2), Rich Coe, 2021/07/15
- Re: dialog --pause not timing out on serial console (dialog 1.2), Rich Coe, 2021/07/15
- Re: dialog --pause not timing out on serial console (dialog 1.2), Stefan Puiu, 2021/07/16
- Re: dialog --pause not timing out on serial console (dialog 1.2),
Paul Fertser <=
- Re: dialog --pause not timing out on serial console (dialog 1.2), Stefan Puiu, 2021/07/23
- Re: dialog --pause not timing out on serial console (dialog 1.2), Rich Coe, 2021/07/23
- Re: dialog --pause not timing out on serial console (dialog 1.2), Stefan Puiu, 2021/07/23
- Re: dialog --pause not timing out on serial console (dialog 1.2), Grant Edwards, 2021/07/23