[bug-inetutils] Results with telnet (inetutils 1.9.1-6) on arch

[Glenn Golden]

--
Hi Erik,

Quick response with answer to your question:

Mats Erik Andersson <address@hidden> [2013-09-20 01:53:48 +0200]:
>
> In case you have tried inetutils-telnetd in Arch Linux, can you connect
> from another system without observing any disruptions?
>

Below is what I see.  Behavior seems normal to me.

One caveat: The "could not get file descriptor for console" error is something
I see using all remote login methods (e.g. slogin) as well. This has been the
case for quite a while.  I think it may have something to do with improper
default setup of systemd vconsole.conf, but since it has never caused me any
observable trouble, I have always ignored it.

HTH.

Regards,
Glenn


========================= begin inline attachment ==================
XXX> telnet XXX
Trying 192.168.1.18...
Connected to XXX
Escape character is '^]'.

Linux 3.11.1-1-ARCH (XX.XXXXXX.XXX) (pts/0)

huh login: XXX
Password:
Last login: Fri Sep 20 09:40:53 on tty2
Couldn't get a file descriptor referring to the console
WARNING: gdg console keyboard not loaded, insanity may occur.


XXX$> stty
speed 38400 baud; line = 0;
erase = ^H;
-brkint -imaxbel
HUH$> stty -a
speed 38400 baud; rows 34; columns 80; line = 0;
intr = ^C; quit = ^\; erase = ^H; kill = ^U; eof = ^D; eol = <undef>;
eol2 = <undef>; swtch = <undef>; start = ^Q; stop = ^S; susp = ^Z; rprnt = ^R;
werase = ^W; lnext = ^V; flush = ^O; min = 1; time = 0;
-parenb -parodd cs8 -hupcl -cstopb cread -clocal -crtscts
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr icrnl ixon -ixoff
-iuclc -ixany -imaxbel -iutf8
opost -olcuc -ocrnl onlcr -onocr -onlret -ofill -ofdel nl0 cr0 tab0 bs0 vt0 ff0
isig icanon iexten echo echoe echok -echonl -noflsh -xcase -tostop -echoprt
echoctl echoke
=========================   end inline attachment ==================