bug#66866: aarch64 system cross compilation + pinebook pro image broken?

[Lars Rustand]

Hello, bumping this issue since there has been no activity for a while
and this error is still present. I get the exact same error as Denis
when building any Pine64 images. Building with --system=aarch64-linux
instead of --target=aarch64-linux-gnu works, but this is very much
slower.


This is what I get:

> checking for string.h... (cached) yes
> checking whether NLS is requested... yes
> checking for msgfmt... no
> checking for gmsgfmt... :
> checking for xgettext... no
> checking for msgmerge... no
> checking build system type... x86_64-unknown-linux-gnu
> checking host system type... Invalid configuration `aarch64-linux-gnu': 
> machine `aarch64' not recognized
> configure: error: 
> /gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash 
> ./config.sub aarch64-linux-gnu failed
> error: in phase 'configure': uncaught exception:
> srfi-34 #<condition &invoke-error [program: 
> "/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash" 
> arguments: ("./configure" "CC_FOR_BUILD=gcc" 
> "CONFIG_SHELL=/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash"
>  "SHELL=/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash" 
> "--prefix=/gnu/store/bl3aq7fnpyxq9w2a7bqa4zqgd8z88y8x-gawk-mesboot-3.1.8" 
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" 
> "--host=aarch64-linux-gnu" "ac_cv_func_connect=no") exit-status: 1 
> term-signal: #f stop-signal: #f] 152c4c0>
> phase `configure' failed after 38.7 seconds
> command 
> "/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash" 
> "./configure" "CC_FOR_BUILD=gcc" 
> "CONFIG_SHELL=/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash"
>  "SHELL=/gnu/store/rb75igdc6daly1mz2ivz7rs8hd85imdz-gash-boot-0.3.0/bin/bash" 
> "--prefix=/gnu/store/bl3aq7fnpyxq9w2a7bqa4zqgd8z88y8x-gawk-mesboot-3.1.8" 
> "--enable-fast-install" "--build=x86_64-unknown-linux-gnu" 
> "--host=aarch64-linux-gnu" "ac_cv_func_connect=no" failed with status 1


Other cross-compiled images like Raspberry Pi work fine for me.