bug#38086: RAID installation script with ‘mdadm’ no longer works

[Gábor Boskovits]

Hello Ludo,

Ludovic Courtès <address@hidden> ezt írta (időpont: 2019. nov. 6., Sze, 11:14):

Hello,

Looks like our RAID installation method no longer works, as can be seen
at <https://ci.guix.gnu.org/build/1906208/details>:

--8<---------------cut here---------------start------------->8---
+ guix --version
guix (GNU Guix) c4de60ac3c6aa5b46519011af89988215c347e9e
Copyright (C) 2019 the Guix authors
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
+ export GUIX_BUILD_OPTIONS=--no-grafts
+ GUIX_BUILD_OPTIONS=--no-grafts
+ parted --script /dev/vdb mklabel gpt mkpart primary ext2 1M 3M mkpart primary ext2 3M 600M mkpart primary ext2 600M 1200M set 1 boot on set 1 bios_grub on
+ mdadm --create /dev/md0 --verbose --level=stripe --raid-devices=2 /dev/vdb2 /dev/vdb3
mdadm: chunk size defaults to 512K
mdadm: Defaulting to version 1.2 metadata
[   13.890586] md/raid0:md0: cannot assemble multi-zone RAID0 with default_layout setting
[   13.894691] md/raid0: please set raid0.default_layout to 1 or 2
[   13.896000] md: pers->run() failed ...
mdadm: RUN_ARRAY failed: Unknown error 524
[   13.901603] md: md0 stopped.
--8<---------------cut here---------------end--------------->8---

Anyone knows what it takes to “set raid0.default_layout to 1 or 2”?

On kernel 5.3.4 and above the

raid0.default_layout=2 kernel boot paramter should be set. We should generate our grub configuration accordingly.

See this for reference: https://blog.icod.de/2019/10/10/caution-kernel-5-3-4-and-raid0-default_layout/

We should then update (gnu tests install) and the manual accordingly.

Thanks,
Ludo’.

Best regards,

g_bor

--

OpenPGP Key Fingerprint: 7988:3B9F:7D6A:4DBF:3719:0367:2506:A96C:CF63:0B21