bug-guix
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

bug#35181: Hydra offloads often get stuck while exporting build requisit


From: Mark H Weaver
Subject: bug#35181: Hydra offloads often get stuck while exporting build requisites
Date: Mon, 08 Apr 2019 15:40:51 -0400
User-agent: Gnus/5.13 (Gnus v5.13) Emacs/26.1 (gnu/linux)

Hi Ludovic,

Ludovic Courtès <address@hidden> writes:

> Mark H Weaver <address@hidden> skribis:
>
>> The source checkout currently being transferred for build 3432472
>> (/gnu/store/…-font-google-material-design-icons-3.0.1-checkout) is 176
>> megabytes uncompressed, as measured by "du -s --si", which is not
>> precisely same as NAR size, but hopefully close enough for a rough
>> estimate.  As I write this, build 3432472 been stuck here for 24 hours
>> 15 minutes.  Even if the average transfer rate were 4 kilobytes per
>> second, it should have been done in half that time.
>
> This is weird, could it be that data transfers get stuck somehow?

As far as I can tell, that's what seems to happen.

> Did you try to check the status of the ‘nix-store’ and ‘guix offload’
> processes on the head node?

Here are the corresponding 'guix offload' processes:

--8<---------------cut here---------------start------------->8---
address@hidden:~$ ps auxwwf | head -1; ps auxwwf | egrep -B1 'off()load'
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
root      8984  0.0  0.0  30784  2248 ?        Ss   Apr07   0:00  |       \_ 
/root/.guix-profile/bin/guix-daemon 8983      --max-jobs=1 
--build-users-group=guixbuild --disable-log-compression --gc-keep-outputs 
--gc-keep-derivations --no-substitutes --cache-failures
root      8985  0.0  0.2 145532 13976 ?        SLsl Apr07   0:10  |       |   
\_ /gnu/store/yihvhxv3xyyvl1m2cy1lnf1lyi9h76fk-guile-2.2.2/bin/guile 
--no-auto-compile 
/gnu/store/fkkjhida23k612naa9d4q6avqj5v3b28-guix-0.13.0-8.357ab93/bin/.guix-real
 offload x86_64-linux 3600 1 72000
--
root     14768  0.0  0.0  30752  2356 ?        Ss   Apr07   0:00  |       \_ 
/root/.guix-profile/bin/guix-daemon 14767     --max-jobs=1 
--build-users-group=guixbuild --disable-log-compression --gc-keep-outputs 
--gc-keep-derivations --no-substitutes --cache-failures
root     14769  0.0  0.2 145668 10912 ?        SLsl Apr07   0:16  |       |   
\_ /gnu/store/yihvhxv3xyyvl1m2cy1lnf1lyi9h76fk-guile-2.2.2/bin/guile 
--no-auto-compile 
/gnu/store/fkkjhida23k612naa9d4q6avqj5v3b28-guix-0.13.0-8.357ab93/bin/.guix-real
 offload x86_64-linux 3600 1 72000
--8<---------------cut here---------------end--------------->8---

I tried attaching to both of these offload processes with 'strace', and
waited for several minutes for any system call activity.  Both of them
are stuck sleeping within a system call, although I don't yet know which
system call:

--8<---------------cut here---------------start------------->8---
address@hidden:~# strace -p 8985
Process 8985 attached - interrupt to quit
restart_syscall(<... resuming interrupted call ...>^C <unfinished ...>
Process 8985 detached
address@hidden:~# strace -p 14769
Process 14769 attached - interrupt to quit
restart_syscall(<... resuming interrupted call ...>^C <unfinished ...>
Process 14769 detached
--8<---------------cut here---------------end--------------->8---

Here are the 'nix-store' processes:

--8<---------------cut here---------------start------------->8---
address@hidden:~$ ps auxwwf | head -1; ps auxwwf | egrep -A1 'hydra-()build'
USER       PID %CPU %MEM    VSZ   RSS TTY      STAT START   TIME COMMAND
hydra     8980  0.0  0.9 187332 46656 pts/5    S    Apr07   0:01  |   |   \_ 
/usr/local/bin/perl -w /usr/local/bin/hydra-build 3432472
hydra     8983  0.0  0.0  34228   464 pts/5    S    Apr07   0:00  |   |   |   
\_ nix-store --realise 
/gnu/store/5ivay4l7bn0sqsi7k53j4qv3kndrby17-font-google-material-design-icons-3.0.1.drv
 --timeout 72000 --max-silent-time 3600 --option build-max-log-size 67108864 
--keep-going --fallback --no-build-output --log-type flat --print-build-trace 
--add-root 
/nix/var/nix/gcroots/per-user/hydra/hydra-roots/y61f3cdhx31msdhkdw0kfs5pb75ycgfq-font-google-material-design-icons-3.0.1
hydra    14764  0.0  0.9 187336 46576 pts/5    S    Apr07   0:01  |   |   \_ 
/usr/local/bin/perl -w /usr/local/bin/hydra-build 3432052
hydra    14767  0.0  0.0  34228   352 pts/5    S    Apr07   0:00  |   |       
\_ nix-store --realise 
/gnu/store/k27i3lkb38gr3mw0mridymhik3qsg6w7-font-fira-sans-4.202.drv --timeout 
72000 --max-silent-time 3600 --option build-max-log-size 67108864 --keep-going 
--fallback --no-build-output --log-type flat --print-build-trace --add-root 
/nix/var/nix/gcroots/per-user/hydra/hydra-roots/28ncfjmplcwyzas2p3d4cy5xlzacjcnj-font-fira-sans-4.202
--8<---------------cut here---------------end--------------->8---

The 'nix-store' processes seem to be stuck sleeping in 'read', if I'm
interpreting the 'strace' output correctly:

--8<---------------cut here---------------start------------->8---
address@hidden:~# strace -p 8983
Process 8983 attached - interrupt to quit
read(3, ^C <unfinished ...>
Process 8983 detached
address@hidden:~# strace -p 14767
Process 14767 attached - interrupt to quit
read(3, ^C <unfinished ...>
Process 14767 detached
--8<---------------cut here---------------end--------------->8---

"netstat --inet --program" shows that the SSH connections are still
open:

--8<---------------cut here---------------start------------->8---
address@hidden:~# netstat --inet --program | grep 'hydra\.net\.in\.tum\.'
tcp        0      0 20121227-hydra.gn:53216 hydra.net.in.tum.de:ssh ESTABLISHED 
14769/guile     
tcp        0      0 20121227-hydra.gn:52434 hydra.net.in.tum.de:ssh ESTABLISHED 
8985/guile      
tcp        0      0 20121227-hydra.gnu.:www hydra.net.in.tum.:52104 TIME_WAIT   
-               
tcp        0      0 20121227-hydra.gnu.:www hydra.net.in.tum.:52103 TIME_WAIT   
-               
--8<---------------cut here---------------end--------------->8---

> I just checked and apparently this package builds fine on berlin.

Also, these same jobs (e.g. same versions) have been built successfully
on hydra.gnunet.org for years without difficulty.  In the case of
'font-fira-sans-4.202.x86_64-linux', it has only ever been built on
hydra.gnunet.org, with the last successful build on 28 September 2018.

The packages haven't been updated in years, and so typically are only
rebuilt during 'core-updates' cycles.  They only started aborting in
late March, when some other rarely-update package apparently changed to
force a rebuild.  However, the similar 'mozjs-60' failures happened
earlier.

FYI, here's the history of build attempts on Hydra:

--8<---------------cut here---------------start------------->8---
hydra=> select case when s.machine~'^(hydra|guix)\.' then s.machine else 
substring(s.machine from '^[^.]*') end as machine, jobset, s.build, s.stepnr as 
step, case when s.busy=1 then 'busy' when s.status=0 then NULL when s.status=1 
then 'fail' when s.status=4 then 'abort' when s.status=7 then 'timeout' when 
s.status=8 then 'cfail' else '?' end as stat, 
regexp_replace(substr(s.drvpath,1+strpos(s.drvpath,'-')),'\.drv$','') as what, 
date_trunc('day', to_timestamp(s.stoptime)) as finished from builds b, 
buildsteps s where b.id=s.build and b.job='font-fira-sans-4.202.x86_64-linux' 
order by s.stoptime;
     machine      |    jobset    |  build  | step | stat  |         what        
 |        finished        
------------------+--------------+---------+------+-------+----------------------+------------------------
 hydra.gnunet.org | master       | 2362639 |    1 |       | 
font-fira-sans-4.202 | 2017-11-29 00:00:00+00
 hydra.gnunet.org | core-updates | 2407845 |    1 |       | 
font-fira-sans-4.202 | 2018-01-02 00:00:00+00
 hydra.gnunet.org | core-updates | 2674686 |    1 |       | 
font-fira-sans-4.202 | 2018-05-19 00:00:00+00
 hydra.gnunet.org | core-updates | 3075254 |    1 |       | 
font-fira-sans-4.202 | 2018-09-28 00:00:00+00
                  | master       | 3432052 |    1 | abort | 
font-fira-sans-4.202 | 2019-03-31 00:00:00+00
                  | master       | 3432052 |    2 | abort | 
font-fira-sans-4.202 | 2019-04-02 00:00:00+00
                  | master       | 3432052 |    3 | abort | 
font-fira-sans-4.202 | 2019-04-03 00:00:00+00
                  | master       | 3432052 |    4 | abort | 
font-fira-sans-4.202 | 2019-04-05 00:00:00+00
                  | master       | 3432052 |    5 | abort | 
font-fira-sans-4.202 | 2019-04-05 00:00:00+00
                  | master       | 3432052 |    6 | abort | 
font-fira-sans-4.202 | 2019-04-06 00:00:00+00
                  | master       | 3432052 |    7 | abort | 
font-fira-sans-4.202 | 2019-04-06 00:00:00+00
                  | master       | 3432052 |    8 | busy  | 
font-fira-sans-4.202 | 
(12 rows)

hydra=> select case when s.machine~'^(hydra|guix)\.' then s.machine else 
substring(s.machine from '^[^.]*') end as machine, jobset, s.build, s.stepnr as 
step, case when s.busy=1 then 'busy' when s.status=0 then NULL when s.status=1 
then 'fail' when s.status=4 then 'abort' when s.status=7 then 'timeout' when 
s.status=8 then 'cfail' else '?' end as stat, 
regexp_replace(substr(s.drvpath,1+strpos(s.drvpath,'-')),'\.drv$','') as what, 
date_trunc('day', to_timestamp(s.stoptime)) as finished from builds b, 
buildsteps s where b.id=s.build and 
b.job='font-google-material-design-icons-3.0.1.i686-linux' order by s.stoptime;
     machine      |    jobset    |  build  | step | stat  |                     
 what                      |        finished        
------------------+--------------+---------+------+-------+------------------------------------------------+------------------------
 chapters         | master       | 1834047 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-02-13 00:00:00+00
 hydra.gnunet.org | core-updates | 1889434 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-03-12 00:00:00+00
                  | master       | 2030520 |    2 | cfail | 
glibc-intermediate-2.25                        | 2017-04-30 00:00:00+00
                  | master       | 2030520 |    1 | cfail | 
glibc-intermediate-2.25                        | 2017-04-30 00:00:00+00
                  | master       | 2030520 |    3 | cfail | 
glibc-intermediate-2.25                        | 2017-04-30 00:00:00+00
 guix.sjd.se      | master       | 2035120 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-05-04 00:00:00+00
 guix.sjd.se      | core-updates | 2111787 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-06-25 00:00:00+00
 hydra.gnunet.org | master       | 2128849 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-06-26 00:00:00+00
 guix.sjd.se      | core-updates | 2175161 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2017-07-20 00:00:00+00
                  | master       | 2334641 |    1 |       | 
font-google-material-design-icons-3.0.1.tar.gz | 2017-10-23 00:00:00+00
 hydra.gnunet.org | master       | 2334641 |    2 |       | 
font-google-material-design-icons-3.0.1        | 2017-10-23 00:00:00+00
                  | core-updates | 2406391 |    1 |       | module-import       
                           | 2018-01-02 00:00:00+00
                  | core-updates | 2406391 |    2 |       | 
module-import-compiled                         | 2018-01-02 00:00:00+00
 guix.sjd.se      | core-updates | 2406391 |    3 |       | 
font-google-material-design-icons-3.0.1        | 2018-01-02 00:00:00+00
 guix.sjd.se      | core-updates | 2667328 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2018-05-18 00:00:00+00
 guix.sjd.se      | core-updates | 3073906 |    1 |       | 
font-google-material-design-icons-3.0.1        | 2018-09-25 00:00:00+00
                  | master       | 3432472 |    1 | abort | 
font-google-material-design-icons-3.0.1        | 2019-03-29 00:00:00+00
                  | master       | 3432472 |    2 | abort | 
font-google-material-design-icons-3.0.1        | 2019-03-30 00:00:00+00
                  | master       | 3432472 |    3 | abort | 
font-google-material-design-icons-3.0.1        | 2019-03-31 00:00:00+00
                  | master       | 3432472 |    4 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-02 00:00:00+00
                  | master       | 3432472 |    5 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-03 00:00:00+00
                  | master       | 3432472 |    6 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-05 00:00:00+00
                  | master       | 3432472 |    7 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-05 00:00:00+00
                  | master       | 3432472 |    8 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-06 00:00:00+00
                  | master       | 3432472 |    9 | abort | 
font-google-material-design-icons-3.0.1        | 2019-04-06 00:00:00+00
                  | master       | 3432472 |   10 | busy  | 
font-google-material-design-icons-3.0.1        | 
(26 rows)
--8<---------------cut here---------------end--------------->8---

It seems that Hydra fails to record the machine name in build steps that
are aborted, but I know that all of the 'aborts' above are on
hydra.gnunet.org, because that's currently the only x86 build slave on
Hydra.

I could easily believe that this problem is specific to
hydra.gnunet.org, but even if that's the case, it would be good if
offloading would reliably time out before days have passed.

Ideally, the timeout would be a "max-silent-time" kind of timeout, so
that we don't impose an arbitrary limitation on total transfer time as
long as progress is being made, and so that the timeout can be
relatively short.  However, even a "total-transfer-time" kind of timeout
would be welcome at this point, to stop the profuse bleeding of Hydra's
limited x86 build capacity.

What do you think?

      Mark





reply via email to

[Prev in Thread] Current Thread [Next in Thread]